Home > NEC > IP Phone > NEC Dterm Series 1 Manual

NEC Dterm Series 1 Manual

    Download as PDF Print this page Share this page

    Have a look at the manual NEC Dterm Series 1 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							– 75 –
    Call RedirectExample: D
    term
     Station A views on the D
    term
     display the Station Number or Caller ID of an Incoming Call and 
    immediately redirects the call by pressing a Function Key. The destination of the Call Redirect will be the 
    Call Forwarding-Don’t Answer Destination or the Recall Destination if the call is transferred without Call 
    Forwarding-Don’t Answer being set at the station.
    Note:This feature is available in North America only.
    Call Redirects to the Call Forward-Don’t Answer Destination:
    Station A sets Call Forward-Don’t Answer to Station B.
    Station C dials Station A, it rings and displays Station C’s number on the display.
    Station A presses the Call Redirect Key.
    REDIRECT is displayed on the LCD, and the call immediately forwards to Station B.
    Using the Soft Key
    Station A sets Call Forward-Don’t Answer to Station B.
    Station C dials Station A, it rings and displays Station C’s number on the display.
    Station A presses the REDIR Soft Key.
    REDIRECT is displayed on the LCD, and the call immediately forwards to Station B.
    - Or -
    Call Redirects to the Recall Destination when call is transferred without Call Forwarding-Don’t 
    Answer being set.
    Station B calls Station C.
    Station C answers the call and transfers it to Station A and then releases the call.
    Station A rings.
    Station A presses the Call Redirect Key.
    REDIRECTING is displayed on Station A and the call immediately recalls to Station C. 
    						
    							– 76 –
    Using the Soft Key
    Station B calls Station C.
    Station C answers the call and transfers it to Station A and then releases the call.
    Station A rings.
    Station A presses the REDIR Soft Key.
    REDIRECTING is displayed on Station A and the call immediately recalls to Station C. 
    						
    							– 77 –
    PrivacyWhile off-hook
    Press DND. LED lights.
    Privacy feature prevents interruptions for the duration of the call.
    Using the Soft Key
    Press flashing DND Soft Key. “DND” flashes when set.
    Privacy feature prevents interruptions for the duration of the call.
    To cancel
    Press DND. LED goes out.
    – Or –
    Replace handset. Privacy feature is automatically cancelled.
    Note: DND must be programmed by the Telephony Server Admin. on a  Programmable feature key.
    Using the Soft Key
    Press flashing DND Soft Key.
    4:26 PM    TUE 13  APR 2004 PRIVACY SET4:26 PM    TUE 13  APR 2004 PRIVACY SET
    MIC >>>4:26 PM    TUE 13  APR 2004 PRIVACY CANCEL4:26 PM    TUE 13  APR 2004 PRIVACY CANCEL
    MIC DND >>> 
    						
    							– 78 –
    Privacy ReleaseExample: D
    term
     Station B is engaged in a conversation, and allows D
    term
     Station A to enter the call in progress.
    Station A lifts handset or presses Speaker.
    Station A presses the line appearance of Station B.
    Warning tone is sent to the interrupted parties (optional).
    A three-way conference is established.
    Note:Station A may also be a single-line station as long as it appears on the Station B D
    term
    .
    – Or –Example: D
    term
     Station A requests entrance into Station B’s call in progress.
    Station A lifts handset or presses Speaker.
    Station A presses the line appearance of Station B.
    Station B LCD indicates:
    Station B may allow Station A to enter the conversation by pressing P-RLS.
    Warning tone is sent to the interrupted parties (optional).
    A three-way conference is established.
    Note 1:Station A can be a single-line station if it appears on the Station B D
    term
    .
    Note 2:Up to six parties can break into a two-party conversation (additional device required).
    4:26 PM    TUE 13  APR 2004 CONF4:26 PM    TUE 13  APR 2004 WAIT P-RLS?4:26 PM    TUE 13  APR 2004 P-RLS?4:26 PM    TUE 13  APR 2004 CONF 
    						
    							– 79 –
    LCD Indication15:39 DDD X
    Time elapsed, trunk type and number for outside call
    Time elapsed for parked call
    XXX DDD X
    Parked call retrieved from a remote station, showing 
    the number of the station that parked the callCCALLBACK XXXX
    Call Back is activated, showing called or calling num-
    ber
    CALLBACK SET XXXX
    Call Back set for busy called station
    CALLPARK SET X
    Incoming call is parked
    CAMP ON DDD X
    Camped on call placed on hold
    CONF
    Three-party conference established
    Conference for Executive Override
    Conference for Privacy Release
    C WAIT XXXX or
    C WAIT SET XXXX
    Call Waiting tone sent to or received at busy station 
    show in called or calling number
    Call received on boss’ station from secretary’s station
    DDND SET/CANCEL
    Do Not Disturb set or cancelled
    Direct Dial Pad ON/OFF
    Dynamic Dial Pad statusEE-HOLD XXXX
    Station placed on Exclusive HoldFFORWARD XXXX
    Station displays forwarding destination
    Call Forwarding – All Calls
    Call Forwarding – Busy Line
    Call Forwarding – Don’t Answer
    Logged Out IP Station – Call Destination
    FORWARD SET/CANCEL
    Call Forwarding set or cancelled
    Call Forwarding – All Calls
    Call Forwarding – Busy Line
    Call Forwarding – Don’t Answer
    Logged Out IP Station – Call DestinationHHANDS FREE ON/OFF
    Hands free status 
    						
    							– 80 –
    LCD Indication (continued)HOLD XXXX
    Station placed on holdIICM X
    Intercom call with called or calling party number
    Automatic Intercom
    Manual Intercom
    Dial Intercom
    Boss Secretary Transfer
    INDICATOR O/OFF
    Indicator Lamp statusLLNR[*]/SPD[_]-n
    Prompt for last number called or
    Speed Calling number
    Stack Dial
    Login
    The IP Enabled D
    term
     becomes operational when the 
    user enters “Login Code” and “Password”.
    Logout
    Press preassigned Logout button to logout.
    MMSG XXXX HH:MMPM
    Message waiting (calling station and time of mes-
    sage)
    MESSAGE BUSY
    Called station message memory Busy – cannot store 
    addition messages
    MESSAGE CANCEL
    Message erased
    MESSAGE REST
    Called Station message receipt restricted – not 
    equipped to receive messages
    MESSAGE SET XXXX
    Message indication left and busy called station
    MW SET/CANCEL
    Message Waiting set or cancelled on boss’ station 
    from secretary’s stationOOG-Q SET
    Outgoing Trunk Queue – call placed in queue for next 
    available outgoing trunk 
    						
    							– 81 –
    LCD Indication (continued)OVERRIDE X
    Overriding intercom call through bridging
    Automatic Intercom
    Dial Intercom
    Manual Intercom
    OVERRIDE XXXX
    Executive OverridePPICK UP XXXX  X
    Call Pickup of station within group showing called and 
    calling stations
    PA G I N G Xor
    PAGING DDD X
    Ready to page station, page waiting or page call con-
    nection
    P-RLS SET
    Privacy Release set
    P-RLS ?
    Prompt requesting privacy release for incoming call
    PRIVACY SET/CANCEL
    Privacy set or cancelledRRCV VOL. SMALL/LARGE
    Receiver Volume statusRINGER TONE X
    Ready for Ringer tone selection
    SSPEED SET
    Speed Calling number saved in memoryTTRANSFER
    Ready to transfer a call
    TRANSFER XXXX
    Transferred station or trunk number
    Page Call Transfer
    TRANSFER XXXX X
    Transferring station number
    TRANSFER 3
    Transferring page call to another station
    T/R VOL. SMALL/LARGE
    Transmission Receiving Volume statusVVOICE XXXX
    Voice Call showing called or calling station number
    VOICE BUSY/REST
    Voice Call station called is busy or restricted 
    						
    							– 82 –
    WWAIT P-RLS?
    Prompt when requesting privacy release at another 
    station 
    						
    							– 83 –
    Index 
    						
    All NEC manuals Comments (8)