NEC Dterm Series 1 Manual

– 75 –
Call RedirectExample: D
term
 Station A views on the D
term
 display the Station Number or Caller ID of an Incoming Call and 
immediately redirects the call by pressing a Function Key. The destination of the Call Redirect will be the 
Call Forwarding-Don’t Answer Destination or the Recall Destination if the call is transferred without Call 
Forwarding-Don’t Answer being set at the station.
Note:This feature is available in North America only.
Call Redirects to the Call Forward-Don’t Answer...

– 76 –
Using the Soft Key
Station B calls Station C.
Station C answers the call and transfers it to Station A and then releases the call.
Station A rings.
Station A presses the REDIR Soft Key.
REDIRECTING is displayed on Station A and the call immediately recalls to Station C. 

– 77 –
PrivacyWhile off-hook
Press DND. LED lights.
Privacy feature prevents interruptions for the duration of the call.
Using the Soft Key
Press flashing DND Soft Key. “DND” flashes when set.
Privacy feature prevents interruptions for the duration of the call.
To cancel
Press DND. LED goes out.
– Or –
Replace handset. Privacy feature is automatically cancelled.
Note: DND must be programmed by the Telephony Server Admin. on a  Programmable feature key.
Using the Soft Key
Press flashing DND Soft Key.
4:26...

– 78 –
Privacy ReleaseExample: D
term
 Station B is engaged in a conversation, and allows D
term
 Station A to enter the call in progress.
Station A lifts handset or presses Speaker.
Station A presses the line appearance of Station B.
Warning tone is sent to the interrupted parties (optional).
A three-way conference is established.
Note:Station A may also be a single-line station as long as it appears on the Station B D
term
.
– Or –Example: D
term
 Station A requests entrance into Station B’s call in...

– 79 –
LCD Indication15:39 DDD X
Time elapsed, trunk type and number for outside call
Time elapsed for parked call
XXX DDD X
Parked call retrieved from a remote station, showing 
the number of the station that parked the callCCALLBACK XXXX
Call Back is activated, showing called or calling num-
ber
CALLBACK SET XXXX
Call Back set for busy called station
CALLPARK SET X
Incoming call is parked
CAMP ON DDD X
Camped on call placed on hold
CONF
Three-party conference established
Conference for Executive...

– 80 –
LCD Indication (continued)HOLD XXXX
Station placed on holdIICM X
Intercom call with called or calling party number
Automatic Intercom
Manual Intercom
Dial Intercom
Boss Secretary Transfer
INDICATOR O/OFF
Indicator Lamp statusLLNR[*]/SPD[_]-n
Prompt for last number called or
Speed Calling number
Stack Dial
Login
The IP Enabled D
term
 becomes operational when the 
user enters “Login Code” and “Password”.
Logout
Press preassigned Logout button to logout.
MMSG XXXX HH:MMPM
Message waiting (calling...

– 81 –
LCD Indication (continued)OVERRIDE X
Overriding intercom call through bridging
Automatic Intercom
Dial Intercom
Manual Intercom
OVERRIDE XXXX
Executive OverridePPICK UP XXXX  X
Call Pickup of station within group showing called and 
calling stations
PA G I N G Xor
PAGING DDD X
Ready to page station, page waiting or page call con-
nection
P-RLS SET
Privacy Release set
P-RLS ?
Prompt requesting privacy release for incoming call
PRIVACY SET/CANCEL
Privacy set or cancelledRRCV VOL. SMALL/LARGE...

– 82 –
WWAIT P-RLS?
Prompt when requesting privacy release at another 
station 

– 83 –
Index