NEC Dterm Series 1 Manual

– 5 –
Dterm
32D and D
term
32D IP
(32-LINE WITH DISPLAY)
1 Call Indicator Lamp
Lamp at top corner of D
term
 Display flashes when a 
call terminates to the terminal.
Lamp lights steadily when a message has been left.
2 LCD (Note 1)
LCD (Liquid Crystal Display) provides D
term
 activity 
information plus data, time and Soft Key Operation.
The LCD has 24-character, 3-line capability.
3Exit
The user can exit from the Help key mode by press-
ing this key.
4Soft Keys
Any feature shown at the bottom of the LCD...

– 6 –
6 Programmable Keys
These keys can be programmed as Flexible Line 
key/Programmable Feature Key by Telephony 
Server Administrator. 
When Telephony Server Administrator sets “One-
Touch Speed Dial key” on the programmable keys, 
users can assign any numbers (ex. Telephone 
number, etc.) to the key (up to 24 digits). (Note 2)
* For the assignment of the keys, confirm to the 
Telephony Server Administrator.
** When two telephone numbers are assigned on A 
side and B side of “One-Touch Speed Dial...

– 7 –
17 Speaker
Controls the built-in speaker which can be used for 
Hands Free dialing/monitoring.
LED on key lights when key is active.
* All standard IP versions include support for full 
duplex handsfree mode. All TDM and IP enabled 
versions are half duplex handsfree mode.
18 Transfer
Allows the station user to transfer established calls 
to another station, without attendant assistance.
19 Hold
Press key to place an internal or external call on 
hold.
20 D
term
 IP Adapter
D
term
 IP adapter can...

– 8 –
Dterm
16LD and D
term
16LD IP
(DESI-less 16LD Phone)
1 Call Indicator Lamp
Lamp at top corner of D
term
 Display flashes when a 
call terminates to the terminal.
Lamp lights steadily when a message has been left.
2 LCD (Note 1)
LCD (Liquid Crystal Display) provides D
term
 activity 
information plus data, time and Soft Key Operation.
The LCD has 24-character, 3-line capability.
3Exit
The user can exit from the Help key mode by press-
ing this key.
4Soft Keys
Any feature shown at the bottom of the...

– 9 –
6 Programmable Keys
These keys can be programmed as Flexible Line 
key/Programmable Feature Key by Telephony 
Server Administrator. 
When Telephony Server Administrator sets “One-
Touch Speed Dial key” on the programmable keys, 
users can assign any numbers (ex. Telephone num-
ber, etc.) to the key (up to 24 digits). (Note 2)
* For the assignment of the keys, confirm to the 
Telephony Server Administrator.
** When two telephone numbers are assigned on A 
side and B side of “One-Touch Speed Dial...

– 10 –
18 Transfer
Allows the station user to transfer established calls 
to another station, without attendant assistance.
19 Hold
Press key to place an internal or external call on 
hold.
20 Speakerphone
Controls the built in speaker which can be used for 
handsfree dialing/monitoring LED on speaker key 
lights when active.
* All standard IP version include support for fill 
duplex handsfree. All TDM and IP enabled versions 
are half duplex handsfree.21 16LD Display
16 additional programmable keys are...

– 11 –
Detailed Descriptions of User’s status and Icon:
Use
r’s S
tatus
Icon
Flas
hing
 P
attern
 IdleNo Icon -
 Call Hold
(Individual Hold/Individual Hold on Call Park Group)
 Call Hold
(Other Party Hold/Other Party Hold on Call Park Group)
 Recall (Individual Hold/Exclusive Call Hold/Call Transfer/
Individual Hold on Call Park Group)
 Recall (Other Party Hold/Other Party Hold on Call Park Group)
 Incoming Call
 Exclusive Call HoldBlink
Note
 During Conversation (Individual Use)
 Call Transfer...

– 12 –
Following picture shows LCD indication of Programma-
ble keys. 
Appropriate icons are displayed according to the using 
feature. These displays cannot be changed by user.Following pictures shows each LCD indication when  
One-Touch Speed Dial key is set to Programmable key. 
Following picture shows the indication of each status.
When Station line/Trunk line are assigned.
No icons are displayed.
* Users can register name on each One-Touch Speed 
Dial key. For the procedures, refer to To Register...

– 13 –
16LD ADM(Available from Feature Package 20-100 R18.)1. USB Interface 
 In Directory mode, users can register telephone 
data from PC through USB Interface.
(USB Interface: 1.1)
* For PC Application “ADM Directory” (used to regis-
ter telephone data), refer to Manual for PC Applica-
tion.
2. LCD (Liquid Crystal Display)
LCD provides any name or number registered to 
each programmable key. Each LCD has 8-character 
capability.
3. Programmable key
These keys can be programmed as Flexible Line...

– 14 –
4. Scroll key
[Expansion mode]
Contrast Up/Down
[Directory mode]
Press the key to view the entries.
* In directory mode, this key scroll one by one when 16 
entries are displayed, and when 4 entries are displayed, 
the key is used to turn the page.
5. DIR/Exit key
Press key to switch Expansion mode to Directory mode.
Press to cancel the procedure during Directory mode.Expansion mode16 additional programmable keys are provided. They 
can be used as Flexible Line key/Programmable Fea-
ture Key....