NEC Dsx 34b Manual

31xx-Configuration
310x-Setup
3101-Type
DSX Software ManualLine Options: 3101-3714◆811
Line
3101-3715
3101-03: DTMF Dialing
(DTMF Dialing)
Use this option to set the type of dialing used by the line (DTMF or Di\
al Pulse).
F
eatures
•Central Of fice Calls, Answering  (page 74)
• Central Of fice Calls, Placing  (page 78)
• Direct Inward Dialing  (page 99)
• Direct Inward Line  (page 109)
• Pulse to Tone Conversion  (page 285)
• T1 Lines  (page 338)
• Tie Lines  (page 344)
Intr
aMail Features
• None
Options...

31xx-Configuration
310x-Setup
3101-Type
812◆Line Options: 3101-3714 DSX Software Manual
•7 for Brazil #5
•
8 for Brazil #6
Default
•0
3101-06: MFC Signaling Type
(MFC Signaling)
For E1 lines only, use this option to specify the MFC Dialing Type.
F
eatures
• N/A
Intr
aMail Features
• None
Options
•0 for MFC not used
•
1 for ITU
•
2 for Argentina
•
3 for Brazil
•
4 for Chile
•
5 for Columbia
•
6 for Mexico
•
7 for Venezuela
Default
•0 

31xx-Configuration
310x-Setup
3102-Access
DSX Software ManualLine Options: 3101-3714◆813
Line
3101-3715
3102-Access
Description
Use this program to set the line Class of Service and Toll Level.
If programming multiple lines, you may  find  9022-Line Copy  (page 923) a handy time-saving tool.
Options
3102-01: Line Class of Service
(COS Level)
Use this option to assign the line’s Class of Service.
F
eatures
• See the  Features for each option in  14xx-COS (Class of Service)  (page 628).
• Tie Lines  (page...

31xx-Configuration
310x-Setup
3103-Settings
814◆Line Options: 3101-3714 DSX Software Manual
3103-Settings
Description
Use this program to customize basic settings for the line.
If programming multiple lines, you may find  9022-Line Copy  (page 923) a handy time-saving tool.
Options
3103-01: Transmit  Gain
(Transmit Gain)
Use this option to set the line’s transmit gain. This gain setting allows you to compensate for the transmit 
gain characteristics of the connected telco or PBX. The setting is applied to...

31xx-Configuration
310x-Setup
3103-Settings
DSX Software ManualLine Options: 3101-3714◆815
Line
3101-3715
3103-03: Loop Length
(Loop Length)
Use this option to compensate for a line’s loop length. Use the default option for normal installations. Use 
the short option only when the system is very close to the central of fice or behind a PBX. Use the long 
option when the loop length is abnormally long.
Set this option for optimal speakerphone performance.
F
eatures
•Central Of fice Calls, Answering  (page...

31xx-Configuration
310x-Setup
3103-Settings
816◆Line Options: 3101-3714 DSX Software Manual
3103-04: Tandem  Calls
(Tandem Calls)
Use this option to enable or disable Tandem Calls for the line.
Enable Tandem Calls for lines if Off Premises Call Forwarding should be able to route incoming calls to an 
off-premises location. The originating line (i.e., the line that Off Premises Call Forwarding will reroute) 
must have this option enabled.  If enabled, the system can forward an incoming over a second line...

31xx-Configuration
311x-Options
3111-Features
DSX Software ManualLine Options: 3101-3714◆817
Line
3101-3715
311x-Options
3111-Features
Description
Use this program to enable or disable various line features.
If programming multiple lines, you may  find  9022-Line Copy  (page 923) a handy time-saving tool.
Options
3111-01: Disable Forced Account Codes
(Disable Forced AC)
Use this option to enable or disable Forced Account Codes for an individual line. If enabled, the system  will 
not  enforce Forced...

31xx-Configuration
311x-Options
3111-Features
818◆Line Options: 3101-3714 DSX Software Manual
•Ye s (1) - Enabled
Default
•Ye s (1) - Enabled
3111-04: Enable MFC Group B
(MFC Group B)
For E1 lines only, use this option to enable or disable the MFC Dialing Group B superviso\
ry signaling. Since 
not all central of fices provide Group B signaling, set this option for compatibility with the conne\
cted telco.
Features
• N/A
Intr
aMail Features
• None
Options
•No (0) - Disabled
•
Ye s (1) - Enabled
Default...

31xx-Configuration
311x-Options
3112-Termination
DSX Software ManualLine Options: 3101-3714◆819
Line
3101-3715
3112-Termination
Description
Use this program to set the line termination options.
If programming multiple lines, you may  find  9022-Line Copy  (page 923) a handy time-saving tool.
Options
3112-01: Direct Termination in the Day
(Day Termination)
Use this option to set the day termination (answering point) for the l\
ine. If the line is a Direct Inward Line, it 
rings the answering point directly...

31xx-Configuration
311x-Options
3112-Termination
820◆Line Options: 3101-3714 DSX Software Manual
3112-03: Day Overflow Destination
(Day Ov fl Destination)
Use this option to set the over flow destination for day mode calls (including DILs). The destination can be 
an extension, UCD Group master number, voice mail master number, Ring Group master number, or Key 
Ring (by pressing CLEAR).
F
eatures
•Direct Inward Dialing  (page 99)
• Direct Inward Line  (page 109)
• Group Ring  (page 189)
• Key Ring  (page...