NEC Call Forward Control Installation And Operations Manual

NDA-30030-003   Revision 3Page 21
Call Forward Control - Installation & Operations Manual INSTALLATION INTRODUCTION
APPLICATION CONFIGURATION (CONT)
STEP 3:   USER-DEFINED PARAMETERS
Make the entries below through the UserDefined command on the Configuration 
Entry screen:
This completes the configuration of Call Forward Control in the APM. Now go to 
the Tenant Database Section to set up the Tenant Database.  U-D # Entry Parameter Definition
 #1/dev/tty1aIdentifies the UAP port used in the communication...

Page 22NDA-30030-003   Revision 3
INSTALLATION INTRODUCTION Call Forward Control - Installation & Operations Manual
TENANT DATABASE
The Tenant Database is an APM database that is used by the HFC application and 
other OAI applications. It provides a mechanism for retrieving the tenant number 
of an extension. Since the Tenant Database may be used by other OAI Applications 
installed under the APM, it is configured using the APM and can not be modified 
by the Call Forward Control Administrator program....

NDA-30030-003   Revision 3Page 23
Call Forward Control - Installation & Operations Manual INSTALLATION INTRODUCTION
TENANT DATABASE EXAMPLES
The following examples display how the Tenant Database may be configured:
Example 1
All extensions use Tenant Number 1.
Example 2
Extensions 2000-2500 use Tenant Number 1.
Extensions 1000-1500 use Tenant Number 2.
Extensions 1900, 2900, and 3900 use Tenant Number 3.
Extensions “#68” and “*69” use Tenant Number 4.
All other Extensions use Tenant Number 5.
TENANT...

Page 24NDA-30030-003   Revision 3
INSTALLATION INTRODUCTION Call Forward Control - Installation & Operations Manual
Use the Add, Delete, and Modify commands to change the database. Use the 
Quit command when all changes have been made, answering ’Y’ when 
prompted “Do you want to save changes? (Y,N)”. The Master File Selection 
menu is displayed. At the Master File Selection menu press  to return 
to the Database Administration Menu.
STEP 2:   PROCESS THE APPLICATION DATABASE
At the Database...

NDA-30030-003   Revision 3Page 25
Call Forward Control - Installation & Operations Manual INSTALLATION INTRODUCTION
MAT ASSIGNMENTS
This guide assumes that data settings that affect the operation of all OAI software 
on a system-wide basis have already been assigned on the NEAX Maintenance 
Administration Terminal (MAT).   Such settings include, for instance, system 
index values and assignment of Interface I/O Port Data in the Interface Processor 
(IP).
For more information about these system data...

Page 26NDA-30030-003   Revision 3
INSTALLATION INTRODUCTION Call Forward Control - Installation & Operations Manual
INITIALIZATION/TERMINATION
INITIALIZATION
The CRC and HFC applications must be initialized through the Non-CRT 
Application option on the APM Operations Menu according to instructions 
provided in the APM Operations Manual.
If an on-site voice mail system exists and the MCI_Server has been configured and 
named in the CRC configuration under User-Defined Parameter #2, MCI_Server 
must also...

NDA-30030-003   Revision 3Page 27
Call Forward Control - Installation & Operations Manual ADMINISTRATOR MAIN MENU INTRODUCTION
Chapter 3 ADMINISTRATOR MAIN MENU INTRODUCTION
A brief discussion of how the CRC and HFC applications process calls will show 
how the Administrator Main Menu assignments fit together to equip CRC and HFC 
for the variety of rerouting tasks that it is capable of performing. Here are some 
examples: 
Example 2: Hard Forward
The Engineering Department has a lunch hour from 12:00...

Page 28NDA-30030-003   Revision 3
ADMINISTRATOR MAIN MENU INTRODUCTION Call Forward Control - Installation & Operations Manual
ADMINISTRATOR MAIN MENU INTRODUCTION (CONT)
The information which CRC and HFC use to manage the call forwarding processes 
described in previous examples is constructed through the CFC Administrator 
Main Menu options. Although it is not necessary to enter information through these 
Main Menu options in any particular sequence, the information must
 correspond 
from one option to...

NDA-30030-003   Revision 3Page 29
Call Forward Control - Installation & Operations Manual ADMINISTRATOR MAIN MENU INTRODUCTION
STARTING THE CFC ADMINISTRATOR PROGRAM
The CFC Administrator program is started as described below:
   
Figure 3-1   CFC Administrator Main Menu
Action Result
At the UAP system console, press the Alt key and a 
function key (F1...F12) at the same time to select a 
login screenThe UNIX login prompt is displayed
Ty p e  cfcadm at the UNIX prompt and press EN-
TER. If prompted for a...

Page 30NDA-30030-003   Revision 3
ADMINISTRATOR MAIN MENU INTRODUCTION Call Forward Control - Installation & Operations Manual
MAIN MENU OPTIONS
The CFC Administrator Main Menu contains the following options:
Extensions -
Phone extensions supported by CRC and HFC are assembled into Call Routing and 
Hard Forward groups according to common needs. That is, if the phones in the 
Human Resources department are to be routed to the Operator at 5:00 p.m., all of 
these phones can be assembled into a Call...