Namco Victory Lap Ace Driver Operators Manual
Here you can view all the pages of manual Namco Victory Lap Ace Driver Operators Manual. The Namco manuals for Games are available online for free. You can easily download all the documents as PDF.
Page 21
Page 21 7-3-5 Motor Test Note:Performing the steering motor test can be dangerous, sit on the seat properly, and take hands off the steering wheel. The following screen is displayed when MOTOR is selected on the I/O screen. I/O TEST DIP 2 12345678 3 12345678 LINK ON 2 COUNT O SWITCH MOTOR BASE MOTOR OFF ............... (a) Seat motor test STEERING OFF TORQUE 00 ............... (b) Steering motor test EXIT GAS: TURN SHIFT: CHOOSE (a) Unused (b) Tests the steering feedback motor. When STEERING is...
Page 22
![Page 22
Page 22
7-3-7 Sound Test
To adjust the sound volume, select SOUND TEST in the menu screen. The
following screen will be displayed.
SOUND TEST [DEFAULT IN GREEN]
VOLUME [MAX 63]
LEFT RIGHT
(a) Left speaker volume ...................... 40 40 .................. (b) Right speaker volume
SONG 00
EXIT
GAS: ENTER SHIFT: CHOOSE
Select (a) or (b) by using the shift lever, the characters will blink in red, when the
accelerator is pressed the numbers will start to blink. Moving the shift lever up will
increase the...](http://img.usermanuals.tech/thumb/5509/62979/w300_victory-lap-ace-driver-operator-s-english_d-21.png "Page 22
Page 22
7-3-7 Sound Test
To adjust the sound volume, select SOUND TEST in the menu screen. The
following screen will be displayed.
SOUND TEST [DEFAULT IN GREEN]
VOLUME [MAX 63]
LEFT RIGHT
(a) Left speaker volume ...................... 40 40 .................. (b) Right speaker volume
SONG 00
EXIT
GAS: ENTER SHIFT: CHOOSE
Select (a) or (b) by using the shift lever, the characters will blink in red, when the
accelerator is pressed the numbers will start to blink. Moving the shift lever up will
increase the...")
Page 22 7-3-7 Sound Test To adjust the sound volume, select SOUND TEST in the menu screen. The following screen will be displayed. SOUND TEST [DEFAULT IN GREEN] VOLUME [MAX 63] LEFT RIGHT (a) Left speaker volume ...................... 40 40 .................. (b) Right speaker volume SONG 00 EXIT GAS: ENTER SHIFT: CHOOSE Select (a) or (b) by using the shift lever, the characters will blink in red, when the accelerator is pressed the numbers will start to blink. Moving the shift lever up will increase the...
Page 23
![Page 23
Page 23
7-4 Adjustments When Replacing Parts (Initialization)
The following adjustments should always be performed after replacing the\
game PC
board, ROM, Steering Assy, Pedal Assy, or Control Pots.
The game will not operate correctly if these adjustments are not made.
a) Ensure that accelerator and brake pedals are fully returned.
b) Place the steering wheel to its centre position and remove hands from t\
he wheel (
The steering wheel does not return to centre by itself.)
c) Slide the test switch...](http://img.usermanuals.tech/thumb/5509/62979/w300_victory-lap-ace-driver-operator-s-english_d-22.png "Page 23
Page 23
7-4 Adjustments When Replacing Parts (Initialization)
The following adjustments should always be performed after replacing the\
game PC
board, ROM, Steering Assy, Pedal Assy, or Control Pots.
The game will not operate correctly if these adjustments are not made.
a) Ensure that accelerator and brake pedals are fully returned.
b) Place the steering wheel to its centre position and remove hands from t\
he wheel (
The steering wheel does not return to centre by itself.)
c) Slide the test switch...")
Page 23 7-4 Adjustments When Replacing Parts (Initialization) The following adjustments should always be performed after replacing the\ game PC board, ROM, Steering Assy, Pedal Assy, or Control Pots. The game will not operate correctly if these adjustments are not made. a) Ensure that accelerator and brake pedals are fully returned. b) Place the steering wheel to its centre position and remove hands from t\ he wheel ( The steering wheel does not return to centre by itself.) c) Slide the test switch...
Page 24
Page 24 8. MAINTENANCE 8-1 Replacing the Fluorescent Lamp 1) Remove four Security Button Head Screws (M4x25) and washers from the top of the header acrylic. 2) Remove four Security Button Head Screws (M4x25) from the Acrylic/Glass retaining bracket, and remove the bracket. 3) Remove the Header Acrylic. 4) Replace the Fluorescent Tube.
Page 25
![Page 25
Page 25
8-2. AB Pedal Assembly
8-2-1. Removing the AB Pedal Assembly 1) Remove the four security screws (M6x25), and withdraw the assemblyforward.
2) Disconnect the connector, and remove the assembly.
8-2-2 Replacing the Control Pots. 1) Loosen the quadrant gear clamp screw, and remove the quadrant gear.
2) Loosen the gear grub screw, and remove the gear.
3) Replace the control pot.
Note: When replacing the control pot
a. Ensure that the potentiometer locating tag is engaged in the mounting pl\
ate...](http://img.usermanuals.tech/thumb/5509/62979/w300_victory-lap-ace-driver-operator-s-english_d-24.png "Page 25
Page 25
8-2. AB Pedal Assembly
8-2-1. Removing the AB Pedal Assembly 1) Remove the four security screws (M6x25), and withdraw the assemblyforward.
2) Disconnect the connector, and remove the assembly.
8-2-2 Replacing the Control Pots. 1) Loosen the quadrant gear clamp screw, and remove the quadrant gear.
2) Loosen the gear grub screw, and remove the gear.
3) Replace the control pot.
Note: When replacing the control pot
a. Ensure that the potentiometer locating tag is engaged in the mounting pl\
ate...")
Page 25 8-2. AB Pedal Assembly 8-2-1. Removing the AB Pedal Assembly 1) Remove the four security screws (M6x25), and withdraw the assemblyforward. 2) Disconnect the connector, and remove the assembly. 8-2-2 Replacing the Control Pots. 1) Loosen the quadrant gear clamp screw, and remove the quadrant gear. 2) Loosen the gear grub screw, and remove the gear. 3) Replace the control pot. Note: When replacing the control pot a. Ensure that the potentiometer locating tag is engaged in the mounting pl\ ate...
Page 26
Page 26 8-3. Shift Assembly Maintenance 1) Removing the Shift assembly a). Remove the four security screws (M6x16), and withdraw the shift assembly. b). Disconnect the connector. 2) Replacing the Microswitch a) Remove the two pozi head screws (M3x16), and replace the switch. b) Ensure that the switch is refitted the correct way round and the wires are fitted to correct terminals. 8-4 Steering assembly Maintenance 1) Remove four Security Screws (M6x25) and hinge the play panel forward and down.
Page 27
Page 27 8-4-1 Replacing the Control Pot 1) Disconnect the Control Pot connector. 2) Loosen the grub screw . Take care not to remove the screw completely . 3) Loosen the pozi head screw retaining the Control Pot bracket and remove the bracket with the Control Pot . 4) Replace the Control Pot. Note : Before re-tightening the grub screw ensure that it engages on the flat of the pot shaft. After replacing the Control the game must be re-initialize d (See section 7-4 Adjustment when Replacing Parts)....
Page 28
Page 28 9. PARTS
Page 29
Page 29 ITEMDESCRIPTIONPART No 1EVA Floor Mat45000184 228 Polo Monitor84000026 3Front Glass31000024 4Side Decal - RHS45000337 5M16 Adjustable Foot88300079 6Castor - 75mm59000005 7Side Decal - LHS45000336 8Victory Lap PCB AssemblyXVL - PCB 9Schaffner Mains Input Assembly66000016 10Link PCB AssemblyXAD-LINKPCB 11Steering PCB Transformer67700020 12Lamp Drive PCB45000670 13SMPSU - 5V @ 32A / 12V @ 12A83000001 14 Fuse 1¼ 1A Slo-Blo63500639 Fuse 1¼ 1A Q.B.63500424 Fuse 1¼ 5A Slo-Blo63500643 15Steering Motor...
Page 30
Page 30 ITEMDESCRIPTIONPART No 1FLUORESCENT TUBE - 4ft64500014 2HEADER ACRYLIC24201027 3E14 240v 25w GOLFBALL LAMP64000084