Namco Prop Cycle Operators Manual

Page 11 4-3 Removing the Shipping Bracket
1. Remove the two Hex Head Set Screws (M8x16) retaining the shipping
bracket to the Cycle Base.
2. Remove the two Hex Head Set Screws (M12x20) retaining the shipping
bracket to the Cycle Assembly.
3. Remove the shipping bracket. (Ensure that the bracket and the M8 screws
and washers are retained safely for refitting if the machine is moved or
transported in the future.)
4. Refit the two Hex Head Screws (M12x20) with washers to the Cycle
Assembly and tighten fully. 

Page 12
5. ADJUSTMENTS
5-1 Turning on the PowerAfter the machine has been installed, turn ON the power. The Power switch is 
located on the rear of the Main cabinet. (See section 3 “Major Compo\
nents”
(page 3).)
5-2 Adjustment Switches The adjustment switches are located inside the coin door. 
1. Service Switch Press this switch to obtain game credits without incrementing the play m\
eters.
2. Test Switch Slide this switch “ON” to enter test mode. 
Test mode allows game testing and the changing of game...

Page 13
5-3 Test Mode
1. Open the coin door and slide the test switch “ON”. The “Menu Sc\
reen” will be displayed on the monitor.
2. Select the test required by moving the handle bars up or down. The colou\
r of the selected test will change.
3. Enter the selected test by pressing the start button. Select “EXIT”\
 to return to the “Menu Screen”
4. After testing is completed, ensure that the test switch is returned to t\
he “OFF” position to return to game mode.
The T est Switch must always be in the...

Page 14 5-3-1 Coin Options
a. Select item (1) “COIN OPTIONS” on the menu screen, to set the
game cost and related settings.
b. Move the handle bars up or down to select the required item then
press the start button.
c. Move the handle bars left or right to change the settings then press
the start button to store the new values.
d. Select “EXIT” and press the start button to return to the menu
screen.
Note:- The price of play on this machine is set within the Cashflow Coin Mech. Ensure
that the Coin...

Page 15 5-3-2 Game  Options
a. Select item (2) “GAME OPTIONS” on the menu screen to set the
game options.
b. Move the handle bars up or down to select the required item then
press the start button.
c. Move the handle bars left or right to change the settings then press
the start button to store the new values.
d. Select “EXIT” and press the start button to return to the menu
screen.
GAME OPTIONS [DEFAULT IN GREEN]
DIFFICULTY B............................. (a)
CONTINUE TIME B................................

Page 16
5-3-3 I/O Test
a. Select item (3) “I/O TEST” on the menu screen. 
b. Move the handle bars up or down to select the required item thenpress the start button.
c. Move the handle bars left or right to change the settings then press the start button to store the new values.
d. Select “EXIT” and press the start button to return to the menu scr\
een
I/O TEST
DIP 12345678 .................................... (a)
SWITCH .................................... (b)
PEDAL .................................... (...

Page 17 5-3-3-1 Switch Test
a. Select “SWITCH” on the menu screen and press the start button. The
following screen is displayed.
I/O TEST
DIP 12345678
SWITCH
UP / DOWN : 0000................................... (a)
RIGHT / LEFT : 0000................................... (b)
S TA RT : OFF ................................... ( c )
COIN : OFF................................... (d)
SERVICE : OFF................................... (e)
TO EXIT : PUSH START AND HANDLEBARS UP
(a) Handle Bar up/down: When the...

Page 18 5-3-3-2 Pedal Test
a. Select “PEDAL” on the menu screen and press the start button. The
following screen is displayed.
I/O TEST
DIP 12345678
SWITCH
PEDAL
PEDAL 7FBF.................... (a)
READY
PRESS START.................... (b)
TO EXIT : PUSH START AND HANDLEBARS UP
}
(a) Pedal rotation When the pedals are rotated in the forward
direction the value increases, and when they
are rotated in the backward direction the value
decreases.
(b) Rotation sensor check This mode checks whether the sensor...

Page 19 e. When the start button has been pressed, the following screen is
displayed.
f. If “OK” is displayed the pedals are correct.
If “NG” is displayed there has been a problem in reading the pedal
rotation. Press start and repeat steps c) and d) again.
If “NG” is still displayed after repeating the test, there is the
possibility that the sensor board or sensor sticker is faulty.
g. Press the start button while pulling back on the handle bars, to return
to the “I/O Test” menu.
5-3-3-3 Fan Motor Test...

Page 20 5-3-3-4 Lamp Test
a. Select “LAMP” on the menu screen and press the start button. The
following screen is displayed.
b. When the start button is pressed once, ‘OFF’ changes to ‘ON’ and
the start button lamp turns ON. When the start button is pressed
again, ‘ON’ changes to ‘OFF’ and the start button lamp turns OFF.
c. Select “EXIT” and press the start button to return to the “I/O Test”
screen.
5-3-4 Monitor Test
a. Select “MONITOR TEST” on the menu screen and press the start
button. The following...