Namco Prop Cycle Operators Manual

Operators Manual
IT IS TH E RESPONSIBILIT Y OF TH E OPER AT O R TO MAIN TAI N CUS TOMER
SAFET Y
 AT AL L TIME S, AN D IT I S IMPER ATIV E THAT TH E DE TAILS SET
OU T
 IN THI S MANUA L ARE FOLLOWE D PRECISELY,
Part No. 90500089 

No part of this publication may be reproduced by any mechanical, photogr\
aphic or electronic 
process, or in the form of phonographic recording, nor may it be stored \
in a retrieval system,
transmitted or otherwise copied for public or private use, without permi\
ssion from
NAMCO EUROPE LIMITED 
While the information contained in this manual is given in good faith an\
d was accurate at the 
time of publication, NAMCO EUROPE LIMITED reserve the right to make chan\
ges and
alterations without notice....

SAFETY WARNING
In order to use this machine safely, be sure to read this Installation and commissioning
manual carefully before installation, adjustment or use of this machine.
Whenever the owner of this machine entrusts disassembly, installation, adjustment or
routine maintenance to another person, the owner should ensure that that person read
the appropriate precautions and relevant sections of this manual before starting work.
In order that no accidents occur when the machine is in operation,...

Contents
Operators Manual ......................................................................................................................... 1
SAFETY WARNING ...................................................................................................................... 3
1. SPECIFICATIONS ..................................................................................... 5
2. HOW TO PLAY .......................................................................................... 6
3. MAJOR...

Page 5
1. SPECIFICATIONS
POWER SUPPLY:-230volts AC
MONITOR:-Thomson 52” Projector Monitor (RP52)
COIN ACCEPTOR:-Mars CashFlow - 1 Channel
DIMENSIONS:-
Assembled 1250(w) x 2430(d) x 2320(h)
Monitor Cabinet 1250(w) x 645(d) x 1940(h)
Cycle Assembly 980 (w) x 1785(d) x 1380(h)
Header Assembly 1145(w) x 350(d) x 380(h)
WEIGHT:-
Assembled 411kg
Monitor Cabinet 200kg
Cycle Assembly 193kg
Header Assembly 18kg
ACCESSORIES:-Keys: (Cash Door).......................................... 2
(Coin...

Page 6
2. HOW TO PLAY
This is a new flight game in which the player gains points by riding a human-
powered propcycle and flying freely in the sky.
The player flies the propcycle and gains points by hitting and popping floating red
balloons.
(1) Operation
The game is operated by using the handlebars and pedals.
Handle:
- Handle Backward = Climb : The cycle gains altitude but loses speed.
- Handle Forward = Drop : The cycle loses altitude but gains speed.
- Handle Left = Turn Left.
- Handle Right = Turn...

Page 7
3. MAJOR COMPONENTS 

Page 8
4. INSTALLATION
Notes on Installation
DANGER NEVER turn the power to the machine ON until installation has
been completed.
DANGER In order to avoid injury or damage to the machine due to mis-
operation, ensure that the voltage of the mains supply is
230volts AC.
Also, in order to prevent possible electric shocks, be sure that
the machine is connected to the mains supply with a securely
connected earthed plug.
WARNING If the location site of this machine has a polished floor it is
recommended that...

Page 9
WARNING
This machine is designed for indoor use only.
The game must
 not be installed outdoors or under the following conditions:-
a. In areas directly exposed to sunlight, high humidity, direct water contact,
dust, high heat or extreme cold.
b. In locations that would present an obstacle in the case of an emergency,
i.e. near fire equipment or emergency exits.
c. On an unstable or uneven surface, or subject to floor vibration.
4-1 Fitting the Header Assembly
The Header Assembly has a forward...

Page 10 4-2 Connecting the Cycle Assy to the Monitor Cabinet
1, Connect the connectors between the Cycle Assembly And the Monitor
Cabinet.
2. Remove 2off Hex Head Set Screws (M8x25), Spring and Flat Washers on
each Joint Bracket, turn the Bracket over and refit, finger tight, using the
same screws and washers.
3. Push the Cycle Assembly fully up to the Monitor Cabinet, taking care not
to trap any wires.
4 Fit the Joint Brackets, finger tight, to the Monitor Cabinet using 2off Hex
Head Set Screws (M8x25),...