Namco Point Blank 2 Operators Manual

							Page 41 4-2-2 Game Options
1. Select the option to be changed by pressing the Player 1 Start Button.
2. Press the Player 2 Start Button to change the setting value.
3 . Press Player 1 Start Button to select another option or select EXIT and
press the Player 2 Start Button to return to the MENU screen.
Note: No changes will be stored unless EXIT & SAVE is selected from the MENU
Screen.
LIFE : 3 ........................................ (a)
MUSIC IN ATTRACT : YES ........................................ (b)
EXIT
(a) Number of Player Lives. (settable 1 ~ 5)
(b) Sound played during Attract Mode. (Yes / No) 
						

							Page 42 4-2-3 Switch Test
1. Select the option to be changed by pressing the Player 1 Start Button.
2. Press the Player 2 Start Button to change the setting value.
3. Press Player 1 and Player 2 Start Buttons together to return to the MENU
screen.
Note: No changes will be stored unless EXIT & SAVE is selected from the MENU
Screen.
(a) OFF changes to ON when the corresponding Gun Trigger is pressed.
(b) OFF changes to ON when the corresponding Start Button is pressed.
(c) OFF changes to ON each time the Service Switch is pressed.
The value of COIN 1 will increase each time credit is established from the CashFlow.
(d) Always ON when in Test Mode.
(e) OFF changes to ON when DIP SW 1 is set to on.
(f) OFF changes to ON when DIP SW 2 is set to on.
(a) ............................. P1 TRIGGER : OFF P2 TRIGGER : OFF
(b) ............................. P1 START : OFF P2 START : OFF
(c) ............................. SERVICE : OFF COIN 1 : 0
COIN 2 : 0
(d) ............................. TEST SWITCH : ON
(e) ............................. DIP SW1 : OFF
(f) .............................. DIP SW2 : OFF
EXIT : P1 & P2 START 
						

							Page 43 4-2-4 Lamp and Blowback Test
1. Select the test required by pressing the Player 1 Start Button.
2. Press the Player 2 Start Button to activate the test.
3 . Press Player 1 Start Button to select another test or select EXIT and press
the Player 2 Start Button to return to the MENU screen.
Note: No changes will be stored unless EXIT & SAVE is selected from the MENU
Screen.
P1 BLOWBACK
P2 BLOWBACK
P1 START LAMP
P2 START LAMP
EXIT
•When P1 or P2 Blowback is selected, pressing the P2 Start Button will activate
the Blowback (Recoil) on the corresponding gun.
•When P1 or P2 Start Lamp is selected, pressing the P2 Start Button will cause
the corresponding Start Button to blink on and off. Pressing P2 Start Button again
will turn the lamp off. 
						

							Page 44  4-2-5 Monitor Test
On entering Monitor Test from the Menu screen a Colour Bar is displayed on the
monitor.
Pressing P1 Start Button will toggle between the Colour Bar screen and a
Convergence (crosshatch) screen.
COLOUR BAR
Four colour bars are displayed (white, red , green, and Blue) with gradations.
Change the number of gradation steps (32,16,8,4,and 2) by pressing the P2 Start
Button
CONVERGENCE (Crosshatch pattern)
A single colour crosshatch pattern is displayed.
Change the colour of the crosshatch pattern (White, Red, Green and Blue) by
pressing the P2 Start Button
Press P1 and P2 Start Buttons together to return to the MENU screen.
COLOUR BAR
NEXT COLOUR TEST : P1 START
EXIT P1 & P2 STARTColour bar
(White)
Colour bar (Red)
Colour bar (Green)
Colour bar Blue)
NEXT COLOUR TEST : P1 START
EXIT P1 & P2 START CONVERGENCE 
						

							Page 45 4-2-6 Sound Test
1. Select the option to be changed by pressing the Player 1 Start Button.
2. Press the Player 2 Start Button to activate the test.
3 . Press Player 1 Start Button to select another option or select EXIT and
press the Player 2 Start Button to return to the MENU screen.
Note: No changes will be stored unless EXIT & SAVE is selected from the MENU
Screen.
SOUND TEST
SONG : [001] .................................................. (a)
SOUND : OFF ................................................... (b)
STATUS : 0000 ................................................... (c)
LEFT RIGHT
SPEAKER OUT : STEREO ............................................ (d)
EXIT
CHOOSE : P1 START
ENTER : P2 START
(a) Each number will produce a different sound, for approximately 5 seconds, when
the P2 Start Button is pressed. Song 001 will produce a Stereo Check.
When Song Test is selected, pressing P2 Start button will increase the song
number and pressing P1 Trigger will decrease the number.
(b) OFF will change to ON will the sound is being played.
(c) During Stereo Check (song 001) Left or Right will be displayed when sound is
being produced from the left or right speaker.
(d) Changes setting from Stereo to Mono sound. 
						

							Page 46 4-2-7 Data Clear
1. Select the option to be changed by pressing the Player 1 Start Button.
2. Press the Player 2 Start Button to activate the reset.
3 . Press Player 1 Start Button to select another option or select EXIT and
press the Player 2 Start Button to return to the MENU screen.
Note: No changes will be stored unless EXIT & SAVE is selected from the MENU
Screen.
(a) Resets all Game Play data.
(b) Resets all Ranking data.
(c) Resets all test options to factory preset.
(d) Resets all items (a), (b), and (c) together.BACKUP DATA CLEAR
A.D.S.CLEAR ........................................ (a)
RANKING CLEAR ........................................ (b)
SET DEFAULTS ALL OPTIONS ........................................ (c)
ALL CLEAR ........................................ (d)
EXIT 
						

							Page 47 4-2-8 Gun Initialize
This test MUST be carried out after replacing the Game PCB, ROMs, or Gun Assy.
Failure to do so may cause incorrect game play.
1. Select GUN INITIALIZE from the test MENU screen. The following screen
will be displayed.
2. Aim and fire the gun. A 
 will appear on the screen. If the  appears where
the gun was aimed, the gun sight is correct. If the 
 does not appear where
the gun was aimed press P1 Start Button. The following screen will be
displayed.
P1 GUN INITIALIZE
ADJUST GUN SIGHT : P1 START
CHANGE GUN : P2 START
EXIT : P1 &P2 START 
						

							Page 48
P1 GUN INITIALIZE
AIM AT THE CENTRE OF THE CROSS
AND PULL GUN TRIGGER.
3 . Aim the gun at the centre of the cross and pull the trigger. The gun sight is
set and the display will return to the previous test screen.
Note: Ensure that the gun is level and not slanted when aiming at the centre of
the cross otherwise the initialization may not be correct.
4. Repeat step 3 to confirm gun alignment.
5. Press P2 Start Button to switch from P1 Gun to P2 Gun.
6. Repeat steps 3 and 4 to initialize Gun 2.
7. Press P1 and P2 Start Switches together to return to the MENU screen.
Note: No changes will be stored unless EXIT & SAVE is selected from the MENU
Screen. 
						

							Page 49
5. MAINTENANCE
G GG G
GAdjustment or maintenance on this machine should be carried out by
qualified personnel only.
Ensure that the 
POWER to the machine is turned OFF before commencing
any maintenance work. (Trouble shooting, service or repairs etc.)
D DD D
DEinstellungen und Wartung des Gerätes dürfen nur von dafür qualifiziertem
Fachpersonal vorgenommen werden.
Vor Beginn aller Wartungsarbeiten (Fehlersuche, Reparaturen etc.) muß der
Netzstecker gezogen werden.
c cc c
cJusteringer eller vedligehold af denne maskine bør kun udføres af
kvalificeret personale.
Sørg for, at strømmen til maskinen er slukket før der foretages nogen form
for arbejde (fejlfinding, reparation etc.)
E EE E
ELos ajustes y el mantenimiento de esta máquina deben ser realizados sólo
por personal cualificado.
Asegúrese de que la máquina está desconectada antes de comenzar
cualquier trabajo de mantenimiento (reparaciones, resolución de
problemas, etc.)
F FF F
FL’installation, le service, le réglage, ou la maintenance doivent être
effectués uniquement par les personnes qualifiées.
S’assurer que l’interrupteur soit sor OFF avant de commencer tout travail
de maintenance (localisation d’une panne, rèparations, etc.)
K KK K
KÌåôáôñïðÝò Þ åðéäéïñèþóåéò óôá ìç÷áíÞìáôá ðñÝðåé íá ãßíï\
íôáé ìüíï áðü
åîïõóéïäïôçìÝíá Üôïìá.
Íá åßíáé óßãïõñá êëåéóôü ôï ñåýìá ðñéí ïðïéáäÞðïôå äïõëåéÜ óôï
ìç÷Üíçìá.
I II I
IRegolazioni e manutenzione su questa macchina devono essere fatti solo
da personale specializzato.
Assicurarsi che la macchina sia SPENTA prima di incominciare qualsiasi
lavoro di manutenzione (guasti, riparazioni etc.)
N NN N
NJustering eller vedlikehold på denne maskinen skall bare utføres av
kvalifiserte personell.
Forsikre deg om at strømmen er slått av før du påbegynner noe som helst
vedlikeholdsarbeid (feilsøking, reparasjon osv.) 
						

							Page 50
O OO O
OAanpassingen of onderhoud aan deze machine dient alleen uitgevoerd te
worden door bekwaam personeel.
Zorg ervoor dat de machine UITgeschakeld is voordat er enig
onderhoudswerk wordt verricht (troubleshooting, reparaties etc.)
P PP P
PAfinações ou manutenção nesta maquina, deverão ser efectuadas sómente
por pessoal qualificado.
Certifique-se que a maquina se encontra desligada sempre que iniciar
qualquer tipo de trabalho de manutenção. (identifação de avarias,
reparação etc.)
S SS S
SJusteringar och underhåll på denna maskin skall endast utföras av
kvalificerad personal.
Försäkra dig om att strömmen är avstängd innan underhållsarbete påbörjas
(felsökning, reparationer etc.)
l ll l
lTätä laitetta saa säätää tai huoltaa vain siihen ammattipätevyyden omaava
henkilökunta.
Varmista, että laite on kytketty POIS PÄÄLTÄ ennen työn aloittamista.