Namco Point Blank 2 Operators Manual

Page 41 4-2-2 Game Options
1. Select the option to be changed by pressing the Player 1 Start Button.
2. Press the Player 2 Start Button to change the setting value.
3 . Press Player 1 Start Button to select another option or select EXIT and
press the Player 2 Start Button to return to the MENU screen.
Note: No changes will be stored unless EXIT & SAVE is selected from the MENU
Screen.
LIFE : 3 ........................................ (a)
MUSIC IN ATTRACT : YES ...........................................

Page 42 4-2-3 Switch Test
1. Select the option to be changed by pressing the Player 1 Start Button.
2. Press the Player 2 Start Button to change the setting value.
3. Press Player 1 and Player 2 Start Buttons together to return to the MENU
screen.
Note: No changes will be stored unless EXIT & SAVE is selected from the MENU
Screen.
(a) OFF changes to ON when the corresponding Gun Trigger is pressed.
(b) OFF changes to ON when the corresponding Start Button is pressed.
(c) OFF changes to ON each time the...

Page 43 4-2-4 Lamp and Blowback Test
1. Select the test required by pressing the Player 1 Start Button.
2. Press the Player 2 Start Button to activate the test.
3 . Press Player 1 Start Button to select another test or select EXIT and press
the Player 2 Start Button to return to the MENU screen.
Note: No changes will be stored unless EXIT & SAVE is selected from the MENU
Screen.
P1 BLOWBACK
P2 BLOWBACK
P1 START LAMP
P2 START LAMP
EXIT
•When P1 or P2 Blowback is selected, pressing the P2 Start Button will...

Page 44  4-2-5 Monitor Test
On entering Monitor Test from the Menu screen a Colour Bar is displayed on the
monitor.
Pressing P1 Start Button will toggle between the Colour Bar screen and a
Convergence (crosshatch) screen.
COLOUR BAR
Four colour bars are displayed (white, red , green, and Blue) with gradations.
Change the number of gradation steps (32,16,8,4,and 2) by pressing the P2 Start
Button
CONVERGENCE (Crosshatch pattern)
A single colour crosshatch pattern is displayed.
Change the colour of the...

Page 45 4-2-6 Sound Test
1. Select the option to be changed by pressing the Player 1 Start Button.
2. Press the Player 2 Start Button to activate the test.
3 . Press Player 1 Start Button to select another option or select EXIT and
press the Player 2 Start Button to return to the MENU screen.
Note: No changes will be stored unless EXIT & SAVE is selected from the MENU
Screen.
SOUND TEST
SONG : [001] .................................................. (a)
SOUND : OFF...

Page 46 4-2-7 Data Clear
1. Select the option to be changed by pressing the Player 1 Start Button.
2. Press the Player 2 Start Button to activate the reset.
3 . Press Player 1 Start Button to select another option or select EXIT and
press the Player 2 Start Button to return to the MENU screen.
Note: No changes will be stored unless EXIT & SAVE is selected from the MENU
Screen.
(a) Resets all Game Play data.
(b) Resets all Ranking data.
(c) Resets all test options to factory preset.
(d) Resets all items...

Page 47 4-2-8 Gun Initialize
This test MUST be carried out after replacing the Game PCB, ROMs, or Gun Assy.
Failure to do so may cause incorrect game play.
1. Select GUN INITIALIZE from the test MENU screen. The following screen
will be displayed.
2. Aim and fire the gun. A 
 will appear on the screen. If the  appears where
the gun was aimed, the gun sight is correct. If the 
 does not appear where
the gun was aimed press P1 Start Button. The following screen will be
displayed.
P1 GUN INITIALIZE
ADJUST...

Page 48
P1 GUN INITIALIZE
AIM AT THE CENTRE OF THE CROSS
AND PULL GUN TRIGGER.
3 . Aim the gun at the centre of the cross and pull the trigger. The gun sight is
set and the display will return to the previous test screen.
Note: Ensure that the gun is level and not slanted when aiming at the centre of
the cross otherwise the initialization may not be correct.
4. Repeat step 3 to confirm gun alignment.
5. Press P2 Start Button to switch from P1 Gun to P2 Gun.
6. Repeat steps 3 and 4 to initialize Gun 2.
7....

Page 49
5. MAINTENANCE
G GG G
GAdjustment or maintenance on this machine should be carried out by
qualified personnel only.
Ensure that the 
POWER to the machine is turned OFF before commencing
any maintenance work. (Trouble shooting, service or repairs etc.)
D DD D
DEinstellungen und Wartung des Gerätes dürfen nur von dafür qualifiziertem
Fachpersonal vorgenommen werden.
Vor Beginn aller Wartungsarbeiten (Fehlersuche, Reparaturen etc.) muß der
Netzstecker gezogen werden.
c cc c
cJusteringer eller...

Page 50
O OO O
OAanpassingen of onderhoud aan deze machine dient alleen uitgevoerd te
worden door bekwaam personeel.
Zorg ervoor dat de machine UITgeschakeld is voordat er enig
onderhoudswerk wordt verricht (troubleshooting, reparaties etc.)
P PP P
PAfinações ou manutenção nesta maquina, deverão ser efectuadas sómente
por pessoal qualificado.
Certifique-se que a maquina se encontra desligada sempre que iniciar
qualquer tipo de trabalho de manutenção. (identifação de avarias,
reparação etc.)
S SS S...