Namco Panic Park Operators Manual

Page 41 6-3 Test Mode
1. Open the coin door and slide the test switch “ON”. The “Menu Screen” will
be displayed on the monitor.
2. Select the test required by using the select up/down switch. The colour of
the selected test will change.
3. Activate the test by pressing the Enter switch. Select “EXIT” in each test
to return to the “Menu Screen”.
4. After testing is completed, slide the test switch to the “OFF” position to
return to normal game mode.
The Test Switch must always be in the “OFF” position for...

Page 42 6-3-1 Coin Options
1. Select “COIN OPTIONS” on the menu screen to set the game cost
and related settings. The following screen is displayed.
2. Use the Select Up/Down switch choose the required item then press
the Enter button.
3. Use the Enter button to change the setting.
4. Select “EXIT” and press the Enter button to return to the menu
screen.
Note:- The price of play on this machine is set within the Cashflow Coin Mech.
Ensure that the Game Cost is set to 1 Coin 1 Credit.
m e t Ino i t p i r...

Page 43 6-3-2 Game Options
1. Select “GAME OPTIONS” on the menu screen to set the game
variables, the following screen is displayed.
2. Use the Select Up/Down switch to choose the required item then
press the Enter button.
3. Use the Enter button to change the setting.
4. Select “EXIT” and press the Enter button to return to the menu
screen.
GAME OPTIONS
[DEFAULT IN GREEN]
NO. OF GAMES (1P) 5............................. (a)
NO. OF GAMES (2P) 5............................. (b)
NO. OF GAMES (2P CONTINUE)...

Page 44
6-3-3 I/O Test
1. Select “I/O TEST” on the menu screen to test the switches and lamp\
s. The following screen is displayed.
2. Use the Select Up/Down switch to choose the required item then press the Enter button to enter the test.
3. Select “EXIT” and press the Enter button to return to the menu scr\
een.
I/O TEST
DIP 4
12345678 [ON:RED].............................................. (a)
I/O PCB CHECK ............................................ (b)
I/F INITIALIZE...

Page 45 6-3-3-1 I/O PCB Check
1. Select ‘I/O PCB CHECK’ from the I/O Test Screen. The following
screen is displayed:-
6-3-3-2 I/F Initialize
1. Select ‘I/F INITIALIZE’ from the I/O Test Screen to initialize the swing
lever potentiometers.
2. Move both levers fully to their left and press the start button. Repeat
with both levers fully right and then both levers in the centre of their
travel.
Note: Do not force the levers to the left or right as the rubber
bumpers will be compressed and give a false...

Page 46 6-3-3-3 Switch Test
1. Select “Switch Test” on the I/O menu screen to test the switches.
The following screen is displayed.
2. The display shows the current state of the switches.
3. Press the Up Select switch and the Enter switch together to EXIT and
return to the I/O menu screen
(a) Numbers change by moving the left lever
(b) Numbers change by moving the right lever
(c,d) The display will change from OFF to ON as each switch is
operated
.
(e) not used .
(f to j) The display will change from OFF...

Page 47 6-3-3-4 Lamp Test
1. Select ‘LAMP TEST’ from the I/O Test Screen. The following screen
is displayed:-
The start button lamp will illuminate each time the start switch is
pressed and the display will change from OFF to ON.I/O TEST
DIP 4
12345678 [ON:RED]
BUTTON LAMP (L) OFF....................................... (a)
BUTTON LAMP (R) OFF....................................... (b)
EXIT
ENTER SW : ENTER
6-3-4 Monitor Test
1. Select “MONITOR TEST” on the menu screen to test and adjust the
Monitor. The...

Page 48 6-3-5 Sound Test
1. Select “SOUND TEST” on the menu screen to test the audio and adjust
the volume settings. The following screen is displayed.
2. Use the Select Up/Down switch to choose the required item then press
the Enter button.
3. Use the Up/Down switch to change the setting.
4. Select “EXIT” and press the Enter button to return to the menu screen.
SOUND TEST

VOLUME FRONT L SP (0~64) 45.................................... (a)
FRONT R SP (0~64) 45.................................... (b)...

Page 49
6-3-6 ADS Data
By selecting ADS Data from the menu screen, all of the bookkeeping 
details can be read and/or reset.
6-3-7 Others 1. Select “OTHERS” on the menu screen. The following screen is displa\
yed. 
2. Use the Select Up/Down switch choose the required item then press the Enter button.
3. Select “EXIT” and press the Enter button to return to the menu scr\
een. 
(a,) Displays game software version. 
(b) The current time is displayed (the time cannot be reset)
(c) Used to test the PCB. (this...

Page 50
7. INITIALIZATION
Adjustments when Replacing Parts
The following operation 
must always be performed after replacing the Game
PCB, Rom, or Control Potentiometers.
The game will not operate correctly if these adjustments are not made.
Note: Do not force the levers to the left or right as the rubber bumpers
will be compressed and give a false reading.
1. Slide the TEST switch ON while pressing the SERVICE switch or enter I/F
INITIALIZE from the I/O TEST. The following screen is displayed.
2. Move...