Namco Cyber Cycles Operators Manual

Page 12 4-3 Fitting the Header Assembly
The Header Assembly is heavy (approx. 25kg), with a forward centre of
gravity, so it is important that at least 
two people are used to fit or remove
the Header Assembly.
The fitting position of the Header Assembly is very high, and it is important that a
means of reaching the height safely, without stretching, is available. (e.g. steps,
step stools etc.)
1. Place the Header Assembly on to the tower and pass the connectors in to the
tower, slide the header back...

Page 13 5. How to Play
This game is linkable so players can compete against each other on the same track,
or compete against computer bikes when playing alone. Two machines can be linked
together allowing up to four players to compete against each other.
The Header Assembly displays the position of each rider and also the leading rider.
Speed is controlled by use of the throttle and brake, and steering is controlled by
leaning the bike left or right.
After the insertion of a coin/s, credit is established...

Page 14
6. ADJUSTMENTS
6-1 Turning on the PowerAfter the machine has been installed, turn ON the power. The power switch is 
located on the rear of the right hand cabinet.
6-2 Adjustment Switches The Adjustment switches are located inside the coin door. 
1. Service Switch. Press this switch to obtain game credits without incrementing the play m\
eter.
2. Test Switch Slide the test switch ON to enter test mode. 
Test mode allows testing and the changing of game settings. (Refer to se\
ction
6-3 Test Mode...

Page 15
6-3 Test Mode
1. Open the coin door and slide the test switch ON. The menu screen will \
be displayed on the monitor.
2. Select the test required by leaning the bike left or right. The selected\
 test will blink.
3. Enter the selected test by pressing the View Change push button. Selec\
t EXIT to return the Menu Screen.
4. After testing is completed, ensure that the test switch is returned to t\
he OFF position to return to normal game mode.
The T est Switch must always be in the OFF position for...

Page 16 6-3-1 Coin Options
1. Select item (1) COIN
OPTIONS on the
menu screen to set
the game cost and
related settings.
2. Lean the bike left or
right to select the
required item then
press View Change.
3. Use the Brake to
adjust the settings
UP or the Throttle to
adjust the settings
DOWN, press View
Change to store the
new settings.
4. Select EXIT to
return to the menu
screen.COIN OPTIONS
[ DEFAULT IN GREEN ]
GAME COST
1 COIN 1 CREDIT ------------------------ (a)
FREE PLAY OFF ------------------------...

Page 17 6-3-2 Game Options
1. Select item (2) GAME OPTIONS on the menu screen to set the game
options and related settings.
2. Lean the bike left or right to select the required item then press View
Change.
3. Use the Brake to adjust the settings UP or the Throttle to adjust the settings
DOWN. Standard settings are displayed in green.
4. Select EXIT and press View Change to return to the menu screen.
GAME OPTIONS
[ DEFAULT IN GREEN ]
GAME DIFFICULTY B --------------- (a)
GAME LAPS
GREEN HILL 3...

Page 18
M E T INO I T P I R C S E DYR O T C A F
T E S
y t l u c i f f i D e m a G ) a ()d r a h ( C o t ) y s a e ( AB
l l i H n e e r G ) b (5- 2 t e s - - - e s r u o c l l i H n e e r G r o f s p a l f o r e b m u N3
a m a h o k o Y o e N ) c (5 - 1 t e s - - - e s r u o c a m a h o k o Y o e N r o f s p a l f o r e b m u N2
e m i T y r t n E ) d ()t s e t r o h s ( C o t ) t s e g n o l ( AB
r e b m u N D I ) e (e v a h s e k i b d e k n i l o n t a h t o s t e S . s n o i t i s o p d e k n i l r o f...

Page 19 6-3-3-1 Switch Test
1. Select Switch Test from the I/O Test menu. The following screen will
appear on the monitor.
LAMP TEST
ALL LAMPS
RED
YELLOW
BLUE
1
2
3
4
GREEN
VIEW-SW
VIEW-SW: EXIT
SWITCH TEST
TEST SW ON ................. (a)
COIN SW ON ................. (b)
SERVICE SW ON ................. (c)
BANK 00 CENTRE ................ (d)
THROTTLE 00 ................. (e)
BRAKE 00 ................. (f)
VIEW-SW ON................. (g)
BRAKE+THROTTLE: EXIT
2. The word ON will appear next to items a, b,...

Page 20 6-3-4 Sound Test
1. Select item (4) Sound Test on the menu screen to test the sound and
speakers.
2. The following screen will appear on the monitor. 2. The lamps will automatically illuminate in turn as indicated on the screen.
3. Press ‘View Change’ to return to the “I/O Test” menu screen.
SOUND TEST
[ DEFAULT IN GREEN ]
VOLUME FRONT LEFT SP. 55 ------------------- (a)
FRONT RIGHT SP. 55 ------------------- (b)
TANK SP. 50 ------------------- (c)
REQUEST SONG No. 000 ------------------- (d)...

Page 21 6-3-5 Monitor Test
1. Select item (5) “Monitor Test” on the menu screen to set up and adjust the
monitor.
2. On entering monitor test, the following screen will appear on the monitor.
3. Lean the bike to select a test and press ‘View Change’ to enter the test and
to return to “Monitor Menu” from a test.
6-3-6 ADS Data
1. Select item (5) ADS Data on the menu screen to view machine history
details.
2. The following screen will appear on the monitor.
ADS
POWER ON 000000 .................. (a)
PLAY...