Namco Cyber Cycles Operators Manual

							Part No. 90500038
CYBER CYCLES
Operators Manual
IT IS THE RESPONSIBILITY OF THE OPERATOR TO MAINTAIN CUSTOMER SAFETY AT
ALL
 TIMES, AND IT IS IMPERATIVE THAT THE DETAILS SET OUT IN THIS MANUAL
ARE
 FOLLOWED PRECISELY. 
						

							SAFETY WARNING
In Order to Use This Machine Safely
In order to use this machine safely, be sure to read this Operators Manual carefully
before installation and use of the machine. Whenever the owner of this machine entrusts disassembly, installation, adjustment,
routine maintenance or trouble shooting to another person, the owner sho\
uld ensure 
that they read the appropriate precautions and relevant sections of this\
 manual before
starting work. In order that no accidents occur when the machine is in operation, 
strictly
follow the notes on safety described belo w. Also, carefully read  section 3,
“Precautions”.
Warnings for Operation
NOTE:Only operate this machine after checking that it has been installed corr\
ectly 
and in accordance with the manual.
NOTE:Parts of this machine move during game play, so there are places where the 
distance between the stationary section and moveable section changes.
There is a warning sticker that the player must be able to reach the gre\
y
matting of the cycle base with their feet, however if the operator feels\
 that a
customer playing the game is in any danger, he should warn the customer
accordingly.
NOTE:The warning sticker must always be kept in good condition and replaced i\
f 
worn so that the customer can read it clearly.
NOTE:If there is an error or problem with this machine,  operation must be
stopped immediately.
Warnings for Disassembly, Installation, Routine Maintenance and Troubleshooting
DANGER:Namco Ltd. bears absolutely no responsibility for accidents or injuries 
resulting from unauthorized changes to the machine.
DANGER:Ensure that the machine has been turned  OFF before making adjustments
or carrying out maintenance. Also ensure only qualified personnel carry \
out 
maintenance or turn the power  ON  to this machine.
DANGER:The power supply and inside the monitor will remain hot and have areas o\
f 
high voltage even though the machine has been turned OFF, and there is a
possibility of burns or electric shock. Be careful not to touch these ar\
eas.
DANGER:In order to avoid injuries due to mis-operation, be sure that the voltag\
e of the 
power supply is within the prescribed limits. Also to prevent possible e\
lectric
shocks due to failure, this machine  MUST be fitted with a securely
connected earthed plug.
NOTE:Do not turn the main power switch  ON until the machine has been installed
correctly. 
						

							Page 4
1. SPECIFICATIONS
POWER SUPPLY :-220/240volts AC
 MONITOR :-Hantarex 28 Polo with Auto Degauss
COIN ACCEPTORMars CashFlow - 4 Channel
DIMENSIONS :-
Assembled 1700(w) x 1970(d) x 2100(h)
Monitor Cabinet 800(w) x 750(d) x 1530(h) ea.
Tower 500(w) x 710(d) x 1800(h)
Bike Assy 910(w) x 1370(d) x 930(h) ea.
Header 1450(w) x 240(d) x 500(h)
WEIGHT :-
Assembled 425kg
Monitor Cabinet 95kg ea.
Tower 80kg
Bike Assy 65kg ea.
Header25kg
ACCESSORIES :-Keys: (Cash Door) ..................... 2
(Coin Door) ...................... 2
(Service Door) ................. 2
Number Decal Set 1-4 ........................... 2
IEC Mains Lead ..................................... 1
Link Cable ......................................... 1
Operators Manual .................................. 1
Monitor Manual ...................................... 1
Cashflow Data ........................................ 1
M8x40 Security Screw - SUS ................ 8
M8x20 Security Screw - SUS ................ 4
M8x16 Security Screw - SUS ................ 8
M8 Flat Washer - SUS ........................... 20
M8 Spring Washer - SUS ...................... 20
M5 Security Wrench .............................. 1
M6 Security Wrench .............................. 1
M8 Security wrench ............................... 1 
						

							Page 5
2. MAJOR COMPONENTS 
						

							Page 6
3. PRECAUTIONS
Be sure to read this section carefully.
3-1 Notes on Operation
NOTE:Only operate this machine after checking that it has been installed corr\
ectly 
and in accordance with the manual.
NOTE:Parts of this machine move during game play, so there are places where the 
distance between the stationary section and moveable section changes.
There is a warning sticker that the player must be able to reach the gre\
y
matting of the bike base with their feet, however if the operator feels \
that a
customer playing the game is in any danger, he should warn the customer
accordingly.
NOTE:The warning sticker must always be kept in good condition and replaced i\
f 
worn so that the customer can read it clearly.
NOTE:Ensure customers do not get hurt by leaning or climbing on the cycles. B\
e 
especially careful in the case of young children.
NOTE:If there is an error or problem with this machine,  operation must be
stopped immediately.
Parts of this machine lean to the left and right during game play. In  order to
maintain the customers safety , the operator should strictly follow the
appropriate precautions.
3-2 Cautions When Transporting.
a. Do not subject the game to physical shock when transporting or moving it\
. 
b. Always return the levellers to the UP position before moving the machine\
, even for short distances.
c. The main cabinets, bike assemblies, coin assy and header assy  must be
separated before moving or shipping.
d. Take care not to rope any moulded (plastic) parts when transporting. 
THIS MACHINE IS NOT DESIGNED  TO BE MOVED BY FORK LIF T. 
DO NOT USE 
						

							Page 7
3-3 Cautions When Installing.
1. This machine is designed for indoor use onl y. 
Do No t install the machine in the
following places
2. If this machine is installed next to walls or other machines, ensure tha\
t there is plenty of space between them. 
						

							Page 8
NOTE:So that customers are not injured by the movement of the bikes, ensure that
the machines are separated from each other by 200mm and from walls or
other machines by at least 300mm either side, and 600mm from the rear of
the bikes.
NOTE:In order to gain access to the mains-in connector, ON/OFF switch and link
switches, make sure that the rear of the machine is separated from a wall or
other machine by a distance of at least 500mm or more. 
						

							Page 9
3-4 Cautions when Handling.
DANGERThe Mains Voltage to this machine must be within the range of
220v to 240v AC.
DANGERBe sure that the power is turned  OFF when replacing parts and
connecting/disconnecting connectors.
DANGERTo prevent possible electric shocks due to failure, this machine  MUST
be fitted with a securely connected earthed plug.
DANGERThe monitor and power supply contain areas of very high voltage. Be
extremely careful when inspecting or making adjustments.
DANGERWhen unplugging the game from an electrical outlet, always grasp the
plug, not the mains lead.
NOTES:
•Always return PC Boards to your dealer for repair. Never test the PCB for 
continuity with a multimeter or similar device. The PCB contains sensiti\
ve devices 
which could be damaged or even destroyed by the internal voltage of such\
 test
equipment.
•Adjustments are required after replacing the game PCB, ROM or control po\
ts. 
Adjustments should be performed as described in  section 7-4, Adjustments
when Replacing Parts (page 25).
•After initial installation or if the number of machines linked together \
changes, it
may be necessary to use the test mode to change the settings and link sw\
itch 
settings.  (Refer to section 6-4 , Linking Two Machines (page 20). 
						

							Page 10
4. INSTALLATION
Note:- The monitor cabinets and tower are supplied already assembled.
The following instructions are for information only.
4-1 Assembling the Monitor and Tower Assemblies
1. Connect the loom connectors between the tower assembly and the monitor
assembly, and place the assemblies together, taking care not to trap any wires.
2. Fit, finger tight, three M8x20 Security Screws, Spring and Flat washers to
connect the tower and monitor base.
3. Fit, finger tight, four M8x20 Security Screws, Spring and Flat washers to connect
the monitor cabinet connector cover to the tower.
4. Tighten fully all the Security Screws. (7off)
5. Repeat above for the other monitor cabinet. 
						

							Page 11
4-2 Connecting the Bike Assemblies to the Cabinets
1. Connect the connectors
between the bike assembly and
cabinet.
2. Place the bike assembly onto
the support bracket and push
the bike against the cabinet
taking care not to trap any
wires.
3. Fit, finger tight, the 4off  M8x20
security screws, spring washers
and flat washers, securing the
Bike Assy to the Monitor Base.
4. Fit, finger tight, the 2off M8x20
security screws, spring washers
and flat washers, securing the
Bike assy to the support
bracket.
5. Tighten fully all the security
screws. (6off)
6. Fit the bike number decal to the rear of either side of the bike.
7. Remove the shipping bolts (M8x75) from either side of the bike.
Note:- Retain the shipping bolts in a secure place for re-fitting if the
machine is transported.