Namco Alpine Racer 2 Operators Manual

							Page 22
MENU
COIN OPTIONS ----------------- (1) Sets the price of play  (See 6-3-1)
GAME OPTIONS ----------------- (2) Sets the game options  (See 6-3-2)
I/O TEST ----------------- (3) Used for testing switches and controls (See 6-3-3)
MONITOR TEST ----------------- (5) Used for adjusting the monitor (See 6-3-5)
SOUND TEST ----------------- (4) Used for testing sound and setting volumes (See 6-3-4)
ADS TEST ----------------- (6) Displays accumulated game data (See 6-3-6)
OTHERS ----------------- (7) Used for testing the PC Boards and for initializing all of the settings 
(See 6-3-7)
6-3 Test Mode
1. Open the coin door and slide the test switch ON. The menu screen will \
be displayed on the monitor.
2. Select the test required by pressing the Left or Right Selection push \
button. The selected test will blink.
3. Enter the selected test by pressing the Decision push button. Select \
EXIT to return the Menu Screen.
4. After testing is completed, ensure that the test switch is returned to t\
he OFF position to return to normal game mode.
The T est Switch must always be in the OFF position for normal game mode.
View Change
Select L/R Buttons
: CHOOSE : ENTER 
						

							Page 23COIN OPTIONS
[ DEFAULT IN GREEN ]
GAME COST
1 COIN 1 CREDIT ---------------- (a)
FREE PLAY OFF ---------------- (b)
EXIT
6-3-1 Coin Options
1. Select item (1) COIN
OPTIONS on the menu
screen to set the game
cost and related settings.
2. Press Select L/R to
select the required item.
3. Use the Decision button
to adjust the settings.
4. Select EXIT to return to
the menu screen.
Note :- The price of play on this machine is set within the Cashflow Coin Mech.
Ensure that the Coin Options on the screen are set as shown in the
following table.
ITEMCONTENTSFACTORY SET
(a) Game CostNo of Coins required for No. of credits - - - - - - settable 1 - 91 Coin 1 Credit
(b) Free PlayYes/NoNO
: CHOOSE, CHANGE : ENTER 
						

							Page 24 6-3-2 Game Options
1. Select item (2) GAME OPTIONS on the menu screen to set the game
options and related settings.
2. Press Select L/R to select the required item.
3. Press the Decision button to adjust the settings. Standard settings are
displayed in green.
4. Select EXIT and press Decision to return to the menu screen.
GAME OPTIONS
[ DEFAULT IN GREEN ]
ID No. 0 LEFT LINK OFF ---------- (a)
GAME DIFFICULTY C ---------- (b)
SOUND IN ATTRACT ON ---------- (c)
HI SCORE INITIALIZE ---------- (d)
EXIT
ITEMDESCRIPTIONFACTORY SET
(a) ID NoSets machine as left or right when in linked mode0  Left
(b) Game DifficultyA (easy) to C (hard)B
(c) Sound in AttractOn / OffOn
(d) Hi Score InitializeYes / No (If Yes Hi Score will be reset when exiting test)No
: CHOOSE/CHANGE : ENTER 
						

							Page 25
I/O TEST
DIP 4 12345678 ............................ (a) 
LINK OFF ............................ (b) 
SWITCH TEST ............................ (c)
MOTOR TEST ............................ (d)
LAMP TEST ............................ (e)
STEP ADJUST ............................ (f)
EXIT
6-3-3 I/O Test
1. Select item (3) I/O Test on the menu screen to test the switches, motorand step adjust.
2. Press Select L/R to select the required item, then press the Decision\
 button to enter the test.
3. Select EXIT and press the Decision button to return to the menu scre\
en. 
(a) Shows condition of DIP SW 4 on the PCB. In normal operation all switches\
 are OFF. (If a switch is ON, it will be displayed in red.)
(b) Displays whether machine is linked.  (See 6-4 )
(c) For testing Switches and Control Pots.  (See 6-3-3-1)
(d) Not used on this machine. 
(e) For testing the pushbutton lamps.  (See 6-3-3-2)
(f) For initializing the Step Control Pots.  (See 6-3-3-3)
: CHOOSE : ENTER 
						

							Page 26 6-3-3-1 Switch Test
1. Select Switch Test from the I/O Test menu. The following screen will
appear on the monitor.
2. The word ON will appear next to items (a) to (f) each time the
respective switch is operated.
When the skis are pushed left, SWING-CENTRE will change to LEFT
and OK will appear just before it reaches the extreme left,. When the
skis are pushed right, CENTRE will change to RIGHT and OK will
appear just before it reaches the extreme right. 0000 will increase
when the skis are moved to the right and decrease when they are
moved to the left.
When the skis are tilted, EDGE-CENTRE will change to LEFT or
RIGHT and OK will appear just before they are fully tilted. 0000 will
change as the skis are tilted.
Note: EDGE OK will only appear if you stand and
apply weight to the edges of the ski steps.
There is no problem if OK is not displayed
when standing on the steps in the same way
as normal play.
3. If OK is not displayed when the edge is tilted left or right, re-initialize as
described in section 6-5 Initialization After Replacing Parts.
4. Operate both of the Select L/R buttons and Decision button together
to exit and return to the I/O Test menu screen.
SWITCH TEST
TEST SW ON ................. (a)
COIN SW ON ................. (b)
SERVICE SW ON ................. (c)
L SELECTION BUTTON ON ............ (d)
VIEW CHANGE BUTTON ON ............ (e)
R SELECTION BUTTON ON ............ (f)
SWING 0000 0000 CENTER ......... (g)
EDGE 0000 0000 CENTER ......... (h)
+ : EXIT+ 
						

							Page 27 6-3-3-2 Lamp Test
1. Select Lamp Test from the I/O Test menu.
On entering LAMP TEST the View Change and Select switch lamps will
illuminate in sequence and the relevent lamp name will be displayed on
the monitor.
6-3-3-3 Step Adjust
1. Select Step Adjust from the I/O Test menu. The following screen will
appear on the monitor.
2. Ensure that the skis are in the centre and level, then press the service
button. INITIALIZE COMPLETE will appear on the monitor display.
3. Select EXIT to return to the Main Menu Screen.
STEP ADJUST
SWING0000h AD0 0000h CENTER
EDGE 0000h AD1 0000h CENTER
INITIALIZE COMPLETED
PUSH SERVICE SWITCH TO RESET
: EXIT 
						

							Page 28 6-3-4 Sound Test
1. Select item (4) Sound Test on the menu screen to test the sound and
speakers.
2. The following screen will appear on the monitor.
3. Select the required item by Select L/R buttons. The selected item will
‘blink’.
4. Pressing the Decision button will cause the selected value setting to blink.
5. Pressing Select R will increase the value and Select L will decrease the
value.
6. Press ‘Decision’ button to return to item select mode.
7. When selecting the Request Song No. test, Select R button will increase
the song number and Select L will decrease the number. The View
Change button will produce the sound of the song number selected.
(Request Song 01 will produce a stereo sound test. Sound will be produced
from the speakers in the following order:- Left speaker, Right speaker, Both
speakers)
8. Press both Select L/R buttons and View Change button together to return to
Sound Test Menu from Request Song No. TestSOUND TEST
VOLUME L SP (0-63) 32 ------------------- (a)
R SP (0-63) 32 ------------------- (b)
SOUND IN ATTRACT ON ------------------- (c)
ATTRACT VOLUME
L SP (0-63) 32 ------------------- (d)
R SP (0-63) 32 ------------------- (e)
REQUEST SONG No. 0 ------------------- (f)
MESSAGE:
EXIT
ItemDescriptionFactory  Set
aSet left speaker volume                   - - - - - -      00 Quietest - 63 Loudest32
bSet right speaker volume                - - - - - -       00 Quietest - 63 Loudest32
cSelect sound for testing. Each number will produce a different sound. 01 will
generate a stereo test.- - -
: CHOOSE : ENTER 
						

							Page 29 6-3-5 Monitor Test
1. Select item (5) “Monitor Test” on the menu screen to set up and adjust the
monitor.
2. On entering monitor test, the screen will display one of the following test
patterns.
3. Use Select L/R buttons to change to the next pattern and Decision button
to return to the Main Menu.
4. Refer to monitor manual for monitor adjustments.GRADATION PATTERN
CROSSHATCH GREEN
CROSSHATCHWHITE
WHITE WINDOW (H)
WHITE WINDOW (M)
WHITE WINDOW (L)
INTERLACE PATTERN
VIEW ANGLE ADJUST (CRT)
VIEW ANGLE ADJUST (PROJECTOR)
FULL WHITE
ADS 1/2
Hrs Mins Secs
ON TIME XX XX XX
PLAY TIME XX XX XX
1RS XX XX XX
1RL XX XX XX
1TS XX XX XX
1TL XX XX XX
2RS XX XX XX
2RL XX XX XX
2TS XX XX XX
2TL XX XX XX
TOTAL PLAY 0000
AVERAGE XXMins XXSecs
ADS CLEAR NO
NEXT PAGE
EXIT 6-3-6 ADS Data
1. Select item (6) ADS Data on the menu screen to view machine history
details.
2. The following screen will appear on the monitor.
3. This page displays total time
that the machine has been
switched on, total playing times of
single and linked games for
downhill and slalem courses, total
number of games played and
average game time.
4. If ADS YES is selected, all
ADS Data will be reset.
5. If Next Page is selected, the
following screen will be displayed.
: CHOOSE : ENTER 
						

							Page 30 6-3-7 Others
1. Select Others on the menu screen and press the View Change button.
This screen is used to test the PCB and to reset the game to factory
settings.
ADS 2/2
BASICS1 S2 S3 S4 S5 S6 S7 GOAL
1RS XX XX XX XX XX XX XX
1RL XX XX XX XX XX XX XX
1TS XX XX XX XX XX XX XX
1TL XX XX XX XX XX XX XX
2RS XX XX XX XX XX XX XX
2RL XX XX XX XX XX XX XX
2TS XX XX XX XX XX XX XX
2TL XX XX XX XX XX XX XX
MOGUL
1RS XX XX XX XX XX XX XX
1RL XX XX XX XX XX XX XX
1TS XX XX XX XX XX XX XX
1TL XX XX XX XX XX XX XX
2RS XX XX XX XX XX XX XX
2RL XX XX XX XX XX XX XX
2TS XX XX XX XX XX XX XX
2TL XX XX XX XX XX XX XX
RACER
1RS XX XX XX XX XX XX XX
1RL XX XX XX XX XX XX XX
1TS XX XX XX XX XX XX XX
1TL XX XX XX XX XX XX XX
2RS XX XX XX XX XX XX XX
2RL XX XX XX XX XX XX XX
2TS XX XX XX XX XX XX XX
2TL XX XX XX XX XX XX XX
6. This screen displays the the position on the course that the player reached
at game over for single and linked game, downhill and slalem and each
racer.
7. Pressing the View Change button will return the screen to the ADS 1 page. 
						

							Page 31
6-4 Linking Two Machines
1. Ensure that the 
power is OFF
2. Loosen the two pozi head screws retaining the link cover bracket, locate\
d next to the mains-in socket on the rear of the monitor cabinet, and remove the l\
ink cover 
bracket.
3. Set the slide switch on the link board to EXT on both machines. 
4. Use the supplied link cables to connect each link board. (See Diag.) 
5. Turn the power to each machine ON, and set the PCB ID using the test mo\
de. (Refer to section  6-3-2 Setting the Game Options - page 13)
Note:- Set the left machine ID to 0 / LEFT and the right hand machine ID\
 to
1 / Right. Settings other than this will cause the machine to operate in\
correctly
6. Refit the link cover bracket and tighten the pozi head screws. 
If the machines are used as single, non linked games ensure that the lin\
k cables 
are removed and the slide switch is returned to the INT position.
IN OUT
Ext
IntINOUT
Ext
Int