Namco Alpine Racer 2 Operators Manual

Page 22
MENU
COIN OPTIONS ----------------- (1) Sets the price of play  (See 6-3-1)
GAME OPTIONS ----------------- (2) Sets the game options  (See 6-3-2)
I/O TEST ----------------- (3) Used for testing switches and controls (See 6-3-3)
MONITOR TEST ----------------- (5) Used for adjusting the monitor (See 6-3-5)
SOUND TEST ----------------- (4) Used for testing sound and setting volumes (See 6-3-4)
ADS TEST ----------------- (6) Displays accumulated game data (See 6-3-6)
OTHERS ----------------- (7) Used...

Page 23COIN OPTIONS
[ DEFAULT IN GREEN ]
GAME COST
1 COIN 1 CREDIT ---------------- (a)
FREE PLAY OFF ---------------- (b)
EXIT
6-3-1 Coin Options
1. Select item (1) COIN
OPTIONS on the menu
screen to set the game
cost and related settings.
2. Press Select L/R to
select the required item.
3. Use the Decision button
to adjust the settings.
4. Select EXIT to return to
the menu screen.
Note :- The price of play on this machine is set within the Cashflow Coin Mech.
Ensure that the Coin Options on the screen...

Page 24 6-3-2 Game Options
1. Select item (2) GAME OPTIONS on the menu screen to set the game
options and related settings.
2. Press Select L/R to select the required item.
3. Press the Decision button to adjust the settings. Standard settings are
displayed in green.
4. Select EXIT and press Decision to return to the menu screen.
GAME OPTIONS
[ DEFAULT IN GREEN ]
ID No. 0 LEFT LINK OFF ---------- (a)
GAME DIFFICULTY C ---------- (b)
SOUND IN ATTRACT ON ---------- (c)
HI SCORE INITIALIZE ---------- (d)...

Page 25
I/O TEST
DIP 4 12345678 ............................ (a) 
LINK OFF ............................ (b) 
SWITCH TEST ............................ (c)
MOTOR TEST ............................ (d)
LAMP TEST ............................ (e)
STEP ADJUST ............................ (f)
EXIT
6-3-3 I/O Test
1. Select item (3) I/O Test on the menu screen to test the switches, motorand step adjust.
2. Press Select L/R to select the required item, then press the Decision\
 button to enter the test.
3. Select...

Page 26 6-3-3-1 Switch Test
1. Select Switch Test from the I/O Test menu. The following screen will
appear on the monitor.
2. The word ON will appear next to items (a) to (f) each time the
respective switch is operated.
When the skis are pushed left, SWING-CENTRE will change to LEFT
and OK will appear just before it reaches the extreme left,. When the
skis are pushed right, CENTRE will change to RIGHT and OK will
appear just before it reaches the extreme right. 0000 will increase
when the skis are moved...

Page 27 6-3-3-2 Lamp Test
1. Select Lamp Test from the I/O Test menu.
On entering LAMP TEST the View Change and Select switch lamps will
illuminate in sequence and the relevent lamp name will be displayed on
the monitor.
6-3-3-3 Step Adjust
1. Select Step Adjust from the I/O Test menu. The following screen will
appear on the monitor.
2. Ensure that the skis are in the centre and level, then press the service
button. INITIALIZE COMPLETE will appear on the monitor display.
3. Select EXIT to return to the...

Page 28 6-3-4 Sound Test
1. Select item (4) Sound Test on the menu screen to test the sound and
speakers.
2. The following screen will appear on the monitor.
3. Select the required item by Select L/R buttons. The selected item will
‘blink’.
4. Pressing the Decision button will cause the selected value setting to blink.
5. Pressing Select R will increase the value and Select L will decrease the
value.
6. Press ‘Decision’ button to return to item select mode.
7. When selecting the Request Song No. test,...

Page 29 6-3-5 Monitor Test
1. Select item (5) “Monitor Test” on the menu screen to set up and adjust the
monitor.
2. On entering monitor test, the screen will display one of the following test
patterns.
3. Use Select L/R buttons to change to the next pattern and Decision button
to return to the Main Menu.
4. Refer to monitor manual for monitor adjustments.GRADATION PATTERN
CROSSHATCH GREEN
CROSSHATCHWHITE
WHITE WINDOW (H)
WHITE WINDOW (M)
WHITE WINDOW (L)
INTERLACE PATTERN
VIEW ANGLE ADJUST (CRT)
VIEW...

Page 30 6-3-7 Others
1. Select Others on the menu screen and press the View Change button.
This screen is used to test the PCB and to reset the game to factory
settings.
ADS 2/2
BASICS1 S2 S3 S4 S5 S6 S7 GOAL
1RS XX XX XX XX XX XX XX
1RL XX XX XX XX XX XX XX
1TS XX XX XX XX XX XX XX
1TL XX XX XX XX XX XX XX
2RS XX XX XX XX XX XX XX
2RL XX XX XX XX XX XX XX
2TS XX XX XX XX XX XX XX
2TL XX XX XX XX XX XX XX
MOGUL
1RS XX XX XX XX XX XX XX
1RL XX XX XX XX XX XX XX
1TS XX XX XX XX XX XX XX
1TL XX XX XX XX XX...

Page 31
6-4 Linking Two Machines
1. Ensure that the 
power is OFF
2. Loosen the two pozi head screws retaining the link cover bracket, locate\
d next to the mains-in socket on the rear of the monitor cabinet, and remove the l\
ink cover 
bracket.
3. Set the slide switch on the link board to EXT on both machines. 
4. Use the supplied link cables to connect each link board. (See Diag.) 
5. Turn the power to each machine ON, and set the PCB ID using the test mo\
de. (Refer to section  6-3-2 Setting the Game...