Namco Ace Driver Deluxe Operators Manual

Page 6 2. If this machine is installed next to walls or other machines, ensure there is
plenty of space between them
NOTE:So that customers are not crushed or injured while the machine is
moving, ensure that it is separated from walls or other machines by at
least 30cm.
NOTE:In order that the PCB rack or power supply can be removed for service,
make sure that the rear of the machine is separated from a wall or
other  machine by a distance of at least 50cm or more.
3-3. Notes on Moving and Shipping...

Page 7
3-4 Notes on Handling
DANGERThe Mains voltage to this machine should be within the range of 
220 to 240v AC and the transformer input matched accordingly.
DANGERBe sure that the power is turned 
OFF when replacing parts and
connecting/disconnecting connectors.
DANGERto prevent possible electric shocks due to failure, this machine  MUST
be fitted with a securely connected earthed plug.
DANGERThe monitor and power supply contain areas of very high voltage. Be 
extremely careful when inspecting or...

Page 8
4. MAJOR COMPONENTS 

Page 9
5 ADJUSTMENTS
5-1 Turning on the PowerAfter the machine has been installed, turn ON the power. 
The Power switch is located on the rear of the upper tower
section. (See section  4 Major Componen ts  (page 8). )
5-2 Adjustment Switches The adjustment switches are located inside the coin door. 
1. Service SwitchPress this switch to obtain game credits without incrementing the play 
meters.
2. Test Switch Slide this switch ON to enter test mode.
Test mode allows game testing and the changing of game...

Page 10
5-3 Test Mode
1. Open the coin door and slide the test switch ON. The Menu Screen will bedisplayed on the monitor.
2. Select the test required by moving the shift lever up or down. The colour of the selected test will change.
3. Enter the selected test by stepping on the accelerator. Select EXIT to return to the Menu Screen (step on the accelerator when using the mon\
itor 
test screen).
4. After testing is completed, ensure that the test switch is returned to the\
 OFF position to return to game...

Page 11 5-3-1 Coin Options
a. Select item (1)
COIN OPTIONS
on the menu screen,
to set the game cost
and related settings.
b. Use the shift lever to
select the required
item then step on
the accelerator.
c. Use the shift lever to
change the settings
then step on the
accelerator to store
the new values.
d. Select EXIT to
return to the menu
screen.
M E T IST N E T N O CYR O T C A F
T E S
t s o C e m a G ) a (9 - 1 e l b a t t e s - - - - - - t i d e r c 1 r o f d e r i u q e r s n i o C1
e u l a V h c e M 1...

Page 12 5-3-2 Game  Options
a. Select item (2) GAME
OPTIONS on the
menu screen to set the
game options.
b. Use the shift lever to
select the required item
then step on the
accelerator.
c. Use the shift lever to
change the settings
then step on the
accelerator to store the
new values.
d. Select EXIT to return
to the menu screen.
Note:  Race Class (c) must
be set first before
changing items (d),
(e), or (f).
NOTES
•The rank (level of difficulty) and number of laps must be set the same
on all positions that...

Page 13
M E T INO I T P I R C S E DTE S Y R O T C A F
r e b m u N B C P ) a (e m a s e h t e v a h s n o i t i s o p d e k n i l e h t f o e n o n t a h t o s t e s e b d l u o h s r e b m u n B C P e h T
r e b m u n
r u o l o C m a e T ) b (DE R62 r o 5 2
E U L B4r o 3
W O L L E Y81 r o 7 1
N E E R G21 r o 1 1
e b d l u o h s s r e b m u n e c a r t n e r e f f i d , d e k n i l e r a ) s t a e s 6 ( s t e s e e r h t n a h t e r o m n e h W *
. s r u o l o c m a e t e m a s e h t r o f d e s u
e c a R...

Page 14
5-3-3 I/O Test
1. Select item (3) I/O TEST on the menu screen. 
2. Use the shift lever to select the required item then step on the acceler\
ator.
I/O TEST
DIP 2 12345678 ........... (a) Option Switch (CPU-PCB Sw2)
3 12345678 ........... (b) Option Switch (CPU-PCB Sw1)
LINK ON 2 COUNT 0 ........... (c) Link Check
SWITCH ........... (d) Switch Test
MOTOR ........... (e) Motor Test 
LAMP ........... (f) Lamp Test
LED ........... (g) LED Test
EXIT 
GAS: ENTER SHIFT: CHOOSE
(a) Displays the state of...

Page 15 5-3-4 Switch Test
The following screen is displayed when SWITCH is selected on the I/O
screen.
I/O TEST
DIP 2 12345678
3 12345678
LINK ON 2 COUNT 0
SWITCH
(a) Accelerator ................GAS:*0000 COIN 1: OFF .............. (e) Coin 1 switch
(b) Brake ................ BRAKE *0000 COIN 2: OFF .............. (f)  Coin 2 switch
(c) Steering ................ STEER*0000 SERVICE: OFF .............. (g) Service switch
(d) Shift ................SHIFT CENTREVIEW: OFF.............. (h) View change switch...