Namco Ace Driver Deluxe Installation Commissioning Manual
Have a look at the manual Namco Ace Driver Deluxe Installation Commissioning Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 93 Namco manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 22
Page
2-3-3 I/O Test
1. Select item (3) “I/O TEST” on the menu screen.
2. Use the shift lever to select the required item then step on the acceler\
ator.
I/O TEST
DIP 2 12345678 .......... (a) Option Switch (CPU-PCB Sw2) 3 12345678 .......... (b) Option Switch (CPU-PCB Sw1)
LINK ON 2 COUNT 0 .......... (c) Link Check
SWITCH .......... (d) Switch Test
MOTOR .......... (e) Motor Test
LAMP .......... (f) Lamp Test
LED .......... (g) LED Test
EXIT
GAS: ENTER SHIFT: CHOOSE
(a) Displays the state of the...](http://img.usermanuals.tech/thumb/5509/60413/w64_ace-driver-deluxe-installation-commissioning-english_d-21.png "Page 22
Page
2-3-3 I/O Test
1. Select item (3) “I/O TEST” on the menu screen.
2. Use the shift lever to select the required item then step on the acceler\
ator.
I/O TEST
DIP 2 12345678 .......... (a) Option Switch (CPU-PCB Sw2) 3 12345678 .......... (b) Option Switch (CPU-PCB Sw1)
LINK ON 2 COUNT 0 .......... (c) Link Check
SWITCH .......... (d) Switch Test
MOTOR .......... (e) Motor Test
LAMP .......... (f) Lamp Test
LED .......... (g) LED Test
EXIT
GAS: ENTER SHIFT: CHOOSE
(a) Displays the state of the...")
![Page 24
Page
2-3-5 Motor Test
The following screen is displayed when “MOTOR” is selected on the \
I/O screen.
I/O TEST
DIP 2 12345678 3 12345678
LINK ON 2 COUNT O
SWITCH
MOTOR BASE MOTOR OFF ............... (a) Seat motor test
STEERING OFF TORQUE 00 ............... (b) Steering motor test
EXIT
GAS: TURN SHIFT: CHOOSE
(a) Tests the seat roller motor. When “BASE MOTOR” is selected and the accelerator is pressed the t\
est is “ON”
and the motor starts to operate. Pressing the accelerator again turns th\
e test...](http://img.usermanuals.tech/thumb/5509/60413/w64_ace-driver-deluxe-installation-commissioning-english_d-23.png "Page 24
Page
2-3-5 Motor Test
The following screen is displayed when “MOTOR” is selected on the \
I/O screen.
I/O TEST
DIP 2 12345678 3 12345678
LINK ON 2 COUNT O
SWITCH
MOTOR BASE MOTOR OFF ............... (a) Seat motor test
STEERING OFF TORQUE 00 ............... (b) Steering motor test
EXIT
GAS: TURN SHIFT: CHOOSE
(a) Tests the seat roller motor. When “BASE MOTOR” is selected and the accelerator is pressed the t\
est is “ON”
and the motor starts to operate. Pressing the accelerator again turns th\
e test...")
![Page 26
Page 2-3-9 Sound Test
To adjust the sound volume, select “SOUND TEST” in the menu screen. The
following screen will be displayed.
SOUND TEST [DEFAULT IN GREEN]
VOLUME [MAX 63]
LEFT RIGHT
(a) Left speaker volume ................. 40 40 ........ (b) Right speaker volume
SONG 40
EXIT
GAS: ENTER SHIFT: CHOOSE
Select (a) or (b) by using the shift lever, the characters will blink in red, when the
accelerator is pressed the numbers will start to blink. Moving the shift lever up will
increase the number, moving...](http://img.usermanuals.tech/thumb/5509/60413/w64_ace-driver-deluxe-installation-commissioning-english_d-25.png "Page 26
Page 2-3-9 Sound Test
To adjust the sound volume, select “SOUND TEST” in the menu screen. The
following screen will be displayed.
SOUND TEST [DEFAULT IN GREEN]
VOLUME [MAX 63]
LEFT RIGHT
(a) Left speaker volume ................. 40 40 ........ (b) Right speaker volume
SONG 40
EXIT
GAS: ENTER SHIFT: CHOOSE
Select (a) or (b) by using the shift lever, the characters will blink in red, when the
accelerator is pressed the numbers will start to blink. Moving the shift lever up will
increase the number, moving...")
Page26 1) Remove six security screws (M5x20) and remove the rear cover. 2) Remove two security screws (M5x20), four security screws (M5x40), and remove the top cover plate. 3) Loosen the hex head screws on the top joint section, slide the sleeve along the shaft and disconnect the joint. 4) Disconnect the bottom joint section as follows: a) Remove six security screws (M6x25), and remove the joint cover. b) Remove two hex head bolts (M10x30). 5) Slide the upper seat assembly a little to the back, then lift and separate it from the seat base assembly.