Namco 500gp Dlxe Operators Manual

							Page 41
COIN COUNTER
ENTER
UP 
						

							Page 42 6-3 Test Mode
1. Open the coin door and slide the test switch “ON”. The “Menu Screen” will be
displayed on the monitor.
2. Select the test required by using the select up/down switch. The colour of the
selected test will change.
3. Activate the test by pressing the Enter switch. Select “EXIT” in each test to return
to the “Menu Screen”.
4. After testing is completed, slide the test switch to the “OFF” position to return to
normal game mode.
The Test Switch must always be in the “OFF” position for normal game mode.
MENU
COIN OPTIONS ................................................ Used to set the price of play.
GAME OPTIONS ................................................ Used to set the game options.
I/O TEST ................................................ Used for testing switches, lamps and
camera.
SOUND TEST ................................................ Used for setting the volumes.
MONITOR TEST ................................................ Used for setting the monitor.
ADS DATA ................................................ Used to view bookkeeping.
OTHERS ................................................ Used for testing the PCB.
The internal battery’s dead .................................. Only displayed when the battery is
faulty (Refer to your Distributor).
ENTER : CHOOSE : 
						

							Page 43 6-3-1 Coin Options
1. Select “COIN OPTIONS” on the menu screen to set the game cost and
related settings. The following screen is displayed.
2. Use the Select Up/Down switch to choose the required item then press the
Enter button.
3. Use the Select Up/Down switch to change the setting.
4. Press the Enter button after changing the setting to be able to select
another item
5. Select “EXIT” and press the Enter button to return to the MENU screen.
Note:- The price of play on this machine is set within the Cashflow Coin Mech. Ensure
that the Game Cost is set to 1 Coin 1 Credit.
m e t Ino i t p i r c s e Dtl u a f e D
t s o C e m a G ) a (9~ 1 e l b a t t e s - - - - s t i d e r c f o r e b m u n r o f d e r i u q e r s n i o Ct i d e r C 1 n i o C 1
a k u z u S p a l x E ) b (es r u o C a k u z u S r o f s p a l a r t x e r o f d e r i u q e r s n i o Cp a L 1 n i o C 1
l u a P p a l x E ) c (es r u o C d r a c i R l u a P r o f s p a l a r t x e r o f d e r i u q e r s n i o Cp a L 1 n i o C 1
z e r e J p a l x E ) d (es r u o C z e r e J r o f s p a l a r t x e r o f d e r i u q e r s n i o Cp a L 1 n i o C 1
y a l P e e r F ) e ()o N ( F F O / ) s e Y ( n O - - - - t i d e r c r o f d e r i u q e r s n i o c o NF F O
COIN OPTIONS [DEFAULT IN GREEN]
GAME COST (1P)1 COIN(S) 1 CREDIT............................ (b)
EXLAP SUZUKA1 COIN(S) 1 LAP(S)............................ (b)
EXLAP PAUL1 COIN(S) 1 LAP(S)............................ (c)
EXLAP JEREZ1 COIN(S) 1 LAP(S)............................ (d)
FREE PLAYOFF............................ (e)
EXIT
ENTER : CHOOSE : 
						

							Page 44 6-3-2 Game Options
1. Select “GAME OPTIONS” on the menu screen to set the game settings.
The following screen is displayed.
2. Use the Select Up/Down switch to choose the required item then press the
Enter button.
3. Use the Select Up/Down switch to change the setting.
4. Press the Enter button after changing the setting to be able to select
another item
5. Select “EXIT” and press the Enter button to return to the MENU screen.
m e t Ino i t p i r c s e Dtl u a f e D
D I U P C ) a (ya l p d e k n i l r o f r e b m u n y t i t n e d I B C P e m a G e h t s t e SE U L B 1
e m i T t c e l e S ) b (e s r u o C / e k i B e h t g n i t c e l e s r o f e m i t e h t s t e S
] t r o h s y r e v E [ o t ] g n o l y r e v A [ - - - - - e l b a t t e SE
y t l u c i f f i D k n i L ) c (e m a g d e k n i l a r o f l e v e l y t l u c i f f i d e h t s t e S
] t s e d r a h E [ o t ] t s e i s a e A [ - - - - - e l b a t t e SD
s p a L k n i L ) d (e m a g d e k n i l a r o f s p a l f o r e b m u n e h t s t e S
0 1 , 5 , 4 , 3 , 2 , 1 - - - - - e l b a t t e S2
y t l u c i f f i D e l g n i S ) e (e m a g e l g n i s a r o f l e v e l y t l u c i f f i d e h t s t e S
] t s e d r a h E [ o t ] t s e i s a e A [ - - - - - e l b a t t e SC
s p a L e l g n i S ) f (e m a g r e y a l p e l g n i s a r o f s p a l f o r e b m u n e h t s t e S
0 1 , 5 , 4 , 3 , 2 , 1 - - - - e l b a t t e S2
y l a p s i D d e e p S ) g (HP M / h / m Kh / m K
t i n I e r o c S - i H ) h (oN / s e Y - - - - - - p u r e w o p t a s t e s e r e r o c S - i Ho N
GAME OPTIONS [DEFAULT IN GREEN]
CPU ID 1 BLUE ............................ (a)
SELECT TIME C [MEDIUM] ............................ (b)
SZK PAL JRZ
LINK DIFFICULTY C C C ............................ (c)
LINK LAPS 2 2 2 ............................ (d)
SINGLE DIFFICULTY C C C ............................ (e)
SINGLE LAPS 2 2 2 ............................ (f)
SPEED DISPLAY Km/h............................ (g)
HI-SCORE INIT NO ............................ (h)
EXIT
ENTER : CHOOSE : 
						

							Page 45
ENTER:  CHOOSE: 
						

							Page 46 6-3-3-1 Switch Test
1. Select “Switch Test” from the I/O menu screen to test the switches.
The following screen is displayed.
2. The screen displays the current state of the switches.
3. Press the Up Select switch and the Enter button at the together to exit and
return to the I/O menu screen.
(a) The numbers change as the throttle is turned. OK appears when the throttle
is full on.
(b) The numbers change  as the brake lever is pulled. OK appears when the
brake is fully on.
(c) The numbers change when the bike is leaned right and left. CENTER,
RIGHT and LEFT is displayed when the bike is in the central, fully right and
fully left positions.
(d) The Test switch must always be ON. If the test switch is turned off the game
will revert to normal game mode.
(e) The number will increase each time the CashFlow outputs a coin signal.
(f) OFF changes to ON when you lean towards the handle bar assembly to
activate the speed sensor.
(g to k) OFF change to ON when the respective switch is activated.
SWITCH TEST
DIP 4 12345678 [ON : RED]
LINK OFF
SWITCH TEST [ON : RED]
(a) ......................... GAS 0000 SERVICE OFF ...................... (g)
(b) ......................... BRAKE 0000VIEW OFF...................... (h)
(c) ......................... BANK 0000 OFF ...................... (i)
(d) .........................TEST ON OFF...................... (j)
(e .......................... COIN OFF 0 OFF ...................... (k)
(f) .......................... TANK OFF
TO EXIT PUSH  AND 
						

							Page 47
SOUND TEST 
						

							Page 48 6-3-5 Monitor Test
1. Select “Monitor Test” from the menu screen to test and adjust the monitor. The
following screen is displayed.
2. Use the Up/Down select switch to choose the required item then press the Enter
button.
3. To return to the Monitor Test Menu from a test pattern, press the Enter Button.
4. Select “EXIT” and press the Enter button to return to the MENU screen.
MONITOR TEST
GRADATION PATTERN ................................ (a)
CROSSHATCH PATTERN (CRT) ................................ (b)
CROSSHATCH PATTERN (PROJ) ................................ (c)
WHITE WINDOW (H) ................................ (d)
WHITE WINDOW (M) ................................ (e)
WHITE WINDOW (L) ................................ (f)
INTERLACE PATTERN ................................ (g)
VIEW ANGLE ADJUST (CRT) ................................ (h)
VIEW ANGLE ADJUST (PROJ) ................................ (i)
FULL WHITE ................................ (j)
EXIT
ENTER : CHOOSE :
Note: Items (b and h) are not used on this game
6-3-6 ADS Data
By selecting ADS Data from the Menu screen, all of the bookkeeping and
game history can be read and/or reset. 
						

							Page 49 6-3-7 Others
1. Select “OTHERS” on the menu screen. The following screen is displayed.
2. Use the Select Up/Down switch to choose the required item then press the
Enter button.
3. Use the Select Up/Down switch to change the setting.
4. Press the Enter button after changing the setting to be able to select
another item
5. Select “EXIT” and press the Enter button to return to the menu screen.
OTHERS
ROM1.Ver. - - / - - / - - - - -  - - : - - : - - ............................... (a)
ROM2.Ver. - - / - - / - - - - -  - - : - - : - -
CLOCK - - / - - / - - - - -  - - : - - : - - ............................... (b)
PCB TEST ............................................... (c)
LANGUAGE ENG............................................... (d)
3 MONITOR MODE OFF ............................................... (e)
BACKUP MEMORY INITIALIZE ............................................. (f)
EXIT
(a) Displays the current version of the Game PCB roms
(b) Displays the time set in the PCB. (This item is not adjustable)
(c) PCB Test. (This item is not active in this game)
(d) Sets the game screen language:-
ENG : English
GER : German
FRA : French
SPA : Spanish
POR : Portugese
ITA : Italian
(e) 3 Monitor Mode. (This item is only when 3 cabinets are set as a 3 in 1 game)
(e) When selected the Data Initialization Menu appears. To reset all game
settings to factory setting and clear all stored data. Select YES from the Data
Initialization Menu and then press the Enter Button.
Note:All coin and game settings will have to be reset after the initialization.
ENTER : CHOOSE : 
						

							Page 50
7. INITIALIZATION
Adjustments when Replacing Parts
The following operation 
must always be performed after replacing the Game PCB,
Rom, or Control Potentiometers.
The game will not operate correctly if these adjustments are not made.
1. Slide the TEST switch ON while pressing and holding the SERVICE switch. The
following screen is displayed.
2. Ensure that the motorcycle is in the upright central position and press the View
Change Button.
3. Lean the motorcycle fully to the right and press the View Change Button.
4. Lean the motorcycle fully to the left and press the View Change Button.
5. Ensure that the throttle is fully released and press the View Change Button.
6. Twist the throttle fully on and press the View Change Button.
7. Ensure that the brake lever is fully released and press the View Change Button.
8. Pull the brake lever fully on and press the View Change Button.
9. The following screen will be displayed.
I/F INITIALIZE
Controlling device initializing
Set the motorcycle to center and
press view change button
BANK CENTER0000
BANKRIGHT0000
BANK LEFT 0000
GAS OFF 0000
GAS FULL 0000
BRAKE OFF 0000
BRAKE FULL 0000