Namco 500gp Dlxe Operators Manual

Page 41
COIN COUNTER
ENTER
UP 

Page 42 6-3 Test Mode
1. Open the coin door and slide the test switch “ON”. The “Menu Screen” will be
displayed on the monitor.
2. Select the test required by using the select up/down switch. The colour of the
selected test will change.
3. Activate the test by pressing the Enter switch. Select “EXIT” in each test to return
to the “Menu Screen”.
4. After testing is completed, slide the test switch to the “OFF” position to return to
normal game mode.
The Test Switch must always be in the “OFF” position for...

Page 43 6-3-1 Coin Options
1. Select “COIN OPTIONS” on the menu screen to set the game cost and
related settings. The following screen is displayed.
2. Use the Select Up/Down switch to choose the required item then press the
Enter button.
3. Use the Select Up/Down switch to change the setting.
4. Press the Enter button after changing the setting to be able to select
another item
5. Select “EXIT” and press the Enter button to return to the MENU screen.
Note:- The price of play on this machine is set...

Page 44 6-3-2 Game Options
1. Select “GAME OPTIONS” on the menu screen to set the game settings.
The following screen is displayed.
2. Use the Select Up/Down switch to choose the required item then press the
Enter button.
3. Use the Select Up/Down switch to change the setting.
4. Press the Enter button after changing the setting to be able to select
another item
5. Select “EXIT” and press the Enter button to return to the MENU screen.
m e t Ino i t p i r c s e Dtl u a f e D
D I U P C ) a (ya l p d e k n...

Page 45
ENTER:  CHOOSE: 

Page 46 6-3-3-1 Switch Test
1. Select “Switch Test” from the I/O menu screen to test the switches.
The following screen is displayed.
2. The screen displays the current state of the switches.
3. Press the Up Select switch and the Enter button at the together to exit and
return to the I/O menu screen.
(a) The numbers change as the throttle is turned. OK appears when the throttle
is full on.
(b) The numbers change  as the brake lever is pulled. OK appears when the
brake is fully on.
(c) The numbers change...

Page 47
SOUND TEST 

Page 48 6-3-5 Monitor Test
1. Select “Monitor Test” from the menu screen to test and adjust the monitor. The
following screen is displayed.
2. Use the Up/Down select switch to choose the required item then press the Enter
button.
3. To return to the Monitor Test Menu from a test pattern, press the Enter Button.
4. Select “EXIT” and press the Enter button to return to the MENU screen.
MONITOR TEST
GRADATION PATTERN ................................ (a)
CROSSHATCH PATTERN (CRT)...

Page 49 6-3-7 Others
1. Select “OTHERS” on the menu screen. The following screen is displayed.
2. Use the Select Up/Down switch to choose the required item then press the
Enter button.
3. Use the Select Up/Down switch to change the setting.
4. Press the Enter button after changing the setting to be able to select
another item
5. Select “EXIT” and press the Enter button to return to the menu screen.
OTHERS
ROM1.Ver. - - / - - / - - - - -  - - : - - : - - ............................... (a)
ROM2.Ver. - - /...

Page 50
7. INITIALIZATION
Adjustments when Replacing Parts
The following operation 
must always be performed after replacing the Game PCB,
Rom, or Control Potentiometers.
The game will not operate correctly if these adjustments are not made.
1. Slide the TEST switch ON while pressing and holding the SERVICE switch. The
following screen is displayed.
2. Ensure that the motorcycle is in the upright central position and press the View
Change Button.
3. Lean the motorcycle fully to the right and press the...