Home > Multi-Tech Systems > Communications System > Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways User Guide

Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways User Guide

Here you can view all the pages of manual Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways User Guide. The Multi-Tech Systems manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 281

MultiVOIP User Guide T1 PhoneBook Configuration
281
In order for any VOIP phone call to be made, there must be both an
Inbound Phonebook entry and an Outbound Phonebook entry that
describe the end-to-end connection.  The phone station originating the
call must be connected to the VOIP system.  The Outbound Phonebook
for that VOIP unit must have a destination pattern entry that includes
the ‘called’ phone (that is, the phone completing the call).  The Inbound
Phonebook of the VOIP where the call is...

Page 282

E1 Phonebook Configuration MultiVOIP User Guide
282
Phonebook configuration screens can be accessed using icons or the
sidebar menu.
Phonebook Icons Description
Phonebook Configuration
Inbound Phonebook
Entries List
Add Inbound Phonebook
Entry
Edit selected Inbound
Phonebook Entry
Outbound Phonebook
Entries List
Add Outbound
Phonebook Entry
Edit selected Outbound
Phonebook Entry 

Page 283

MultiVOIP User Guide T1 PhoneBook Configuration
283
Phonebook Sidebar Menu 

Page 284

E1 Phonebook Configuration MultiVOIP User Guide
284
Phonebook Configuration Procedure
1.  Go to the PhoneBook Configuration screen  (using either the sidebar
menu, drop-down menu, or icon).
In consultation with your VOIP administrator, enter the Gateway
Name and values for Q.931 parameters and Gatekeeper RAS
parameters. Determine whether your voip system will operate with a
proxy server.  Determine which H.323 version 4 functions you will
implement. (They are not always applicable.  See field description...

Page 285

MultiVOIP User Guide T1 PhoneBook Configuration
285
The table below describes all fields in the PhoneBook Configuration
screen.  
PhoneBook Configuration Parameter Definitions
Field Name Values Description
Gateway
NameY/N This field allows you to specify a name for
this MultiVOIP.  When placing a call, this
name is sent to the remote MVP3000 for
display in Call Progress listings, Logs, etc.
Q.931 Parameters
Use Fast Start Y/N Enables the H.323 Fast Start procedure.
May need to be enabled/disabled for...

Page 286

E1 Phonebook Configuration MultiVOIP User Guide
286
PhoneBook Configuration Parameter Definitions
(cont’d)
Field Name Values Description
Proxy Server Parameters
Enable Proxy Y/N
Proxy Server
IP Addressn.n.n.n
where
n=0-255Network address of the proxy
server that the voip is using.
Port Number Logical port number for proxy
communications.
H.323 Version 4 Parameters
Q.931
Multiplexing
(Mux)Y/N Signalling for multiple phone
calls can be carried on a single
port rather than opening a
separate signalling port...

Page 287

MultiVOIP User Guide T1 PhoneBook Configuration
287
PhoneBook Configuration Parameter Definitions
(cont’d)
Field Name Values Description
H.323 Version 4 Parameters
Parallel H.245
(FS + Tun)Y/NFS (Fast Start or Fast Connect)
is a Q.931 feature of H.323v2 to
hasten call setup as well as
‘pre-opening’ the media
channel before the CONNECT
message is sent.  This pre-
opening is a requirement for
certain billing activities.
Under Parallel H.245 FS + Tun,
this Fast Connect feature can
operate simultaneously...

Page 288

E1 Phonebook Configuration MultiVOIP User Guide
288
2. Select PhoneBook Modify and then select
Outbound Phone Book/List Entries.
Click Add. 

Page 289

MultiVOIP User Guide T1 PhoneBook Configuration
289
3. The Add/Edit Outbound PhoneBook screen appears.
Enter Outbound PhoneBook data for your MVP3010.  Note that the
Advanced button gives access to the Alternate IP Routing feature, if
needed.  Alternate IP Routing can be implemented in a secondary
screen (as described after the primary screen field definitions below). 

Page 290

E1 Phonebook Configuration MultiVOIP User Guide
290
The fields of the Add/Edit Outbound Phone Book screen are described
in the table below.   
Add/Edit Outbound Phone Book: Field Definitions
Field Name Values Description
Destination
Patternprefixes,
area codes,
exchanges,
line
numbers,
extensionsDefines the beginning of
dialing sequences for calls
that will be connected to
another VOIP in the system.
Numbers beginning with
these sequences are diverted
from the PTSN and carried
on Internet or other IP...
Start reading Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways User Guide

Related Manuals for Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways User Guide

All Multi-Tech Systems manuals