Home
>
Multi-Tech Systems
>
Communications System
>
Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways S000249C User Guide
Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways S000249C User Guide
Here you can view all the pages of manual Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways S000249C User Guide. The Multi-Tech Systems manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 21
MultiVOIP User Guide Overview 21 Analog MultiVOIP LED Descriptions MVP-210/410/810 Front Panel LED Definitions LED NAMEDESCRIPTION General Operation LEDs (one set on each MultiVOIP model) PowerIndicates presence of power. BootAfter power up, the Boot LED will be on briefly while the MultiVOIP is booting. It lights whenever the MultiVOIP is booting or downloading a setup configuration data set. EthernetRCV. Receive. Lights (blinks) when receiving data on Ethernet port. XMT. Transmit. Lights...
Page 22
Overview MultiVOIP User Guide 22 Computer Requirements The computer on which the MultiVOIP’s configuration program is installed must meet these requirements: •must be IBM-compatible PC with MS Windows operating system; •must have an available COM port for connection to the MultiVOIP. However, this PC does not need to be connected to the MultiVOIP permanently. It only needs to be connected when local configuration and monitoring are done. Nearly all configuration and monitoring functions can be done...
Page 23
MultiVOIP User Guide Overview 23 Specifications Specs for Digital T1 MultiVOIP Units Digital T1 MultiVOIP Specifications Parameter ……/Model MVP-2400 MVP-2410MVP-2410 w/ MVP24-48 Expansion Card Operating Voltage(s)External transformer: 1.6A@5v 100-240 VAC 1.2 - 0.6 A100-240 VAC 1.2 - 0.6 A Mains Frequencies50/60 Hz 50/60 Hz 50/60 Hz Power Consumption13 watts 17 watts 27 watts Mechanical Dimensions6.2” W x 9” D x 1.4” H 15.8cm W x 22.9cm D x 3.6cm H1.75”H x 17.4”W x 8.75”D 4.5cm H x 44.2 cm W x 22.2 cm...
Page 24
Overview MultiVOIP User Guide 24 Specs for Digital E1 MultiVOIP Units Digital E1 MultiVOIP Specifications Parameter ……/ModelMVP-3010 MVP-3010 w/ MVP30-60 Expansion Card Operating Voltage(s)100-240 VAC 1.2 - 0.6 A100-240 VAC 1.2 - 0.6 A Mains Frequencies50/60 Hz 50/60 Hz Power Consumption17 watts 27 watts Mechanical Dimensions1.75”H x 17.4”W x 8.75”D 4.5cm H x 44.2 cm W x 22.2 cm D1.75”H x 17.4”W x 8.75”D 4.5cm H x 44.2 cm W x 22.2 cm D Weight7.1 lbs. (3.2 kg)7.5 lbs. (3.4 kg)
Page 25
MultiVOIP User Guide Overview 25 Specs for Analog MultiVOIP Units Analog MultiVOIP Specifications Parameter ……/ModelMVP210 MVP410 MVP810 or MVP410 + 428 Operating Voltage(s)External transformer: 3A @5V100-240 VAC 1.2 - 0.6 A100-240 VAC 1.2 - 0.6 A Mains Frequencies50/60 Hz 50/60 Hz 50/60 Hz Power Consumption19 watts 29 watts 46 watts Mechanical Dimensions6.2” W x 9” D x 1.4” H 15.8cm W x 22.9cm D x 3.6cm H1.75”H x 17.4”W x 8.5”D 4.5cm H x 44.2 cm W x 21.6 cm D1.75”H x 17.4”W x 8.5”D 4.5cm H x 44.2 cm W...
Page 26
Overview MultiVOIP User Guide 26 Installation at a Glance The basic steps of installing your MultiVOIP network involve unpacking the units, connecting the cables, and configuring the units using management software (MultiVOIP Configuration software) and confirming connectivity with another voip site. This process results in a fully functional Voice-Over-IP network. Related Documentation The MultiVOIP User Guide (the document you are now reading) comes in electronic form and is included on your system...
Page 28
Quick Start Instructions MultiVOIP User Guide 28 Introduction This chapter gets the MultiVOIP up and running quickly. The details we’ve skipped to make this brief can be found elsewhere in the manual (see Table of Contents and Index). MultiVOIP Startup Tasks TaskSummary Collecting Phone/IP Details (vital!) The MultiVOIP must be configured to interface with your particular phone system and IP network. To do so, certain details must be known about those phone and IP systems. PlacementDecide...
Page 29
MultiVOIP User Guide Quick Start Instructions 29 Phone/IP Details *Absolutely Needed* Before Starting the Installation Gather IP Information ➼Ask your computer network administrator.Info needed to operate: all MultiVOIP models. IP Network Parameters: Record for each VOIP Site in System • IP Address • IP Mask • Gateway • Domain Name Server (DNS) Info (not implemented; for future use) Gather Telephone Information ➼T1 Phone Parameters Ask phone company or PBX maintainer. Info needed to operate:...
Page 30
Quick Start Instructions MultiVOIP User Guide 30 Phone/IP Details *Absolutely Needed* (cont’d) Gather Telephone Information ➼E1 Phone Parameters Ask phone company or PBX maintainer. Info needed to operate: MVP3010 E1 Telephony Parameters: Record for this VOIP Site • Which frame format is used? Double Frame_____ MultiFrame w/ CRC4_____ MultiFrame w/ CRC4 modified_____ • Which CAS or PRI protocol is used? ______________ • Clocking: Does the PBX or telco switch use internal or external clocking?...