Multi-Tech Systems MultiVOIP Model Mvp400/800 Standalone Voice/ip Gateway User Guide

51 Chapter 4 - MultiVOIP Software
Others Setup
Clicking the Others button on the main menu displays the Others Setup dialog box. This dialog box
lets you to enable SNMP Agent (the default is disabled) and set up all the necessary parameters;
enable or disable various remote configuration methods such as TFTP (Trivial File Transfer Protocol)
Server, Web Server, Dumb Terminal, and Telnet Server; and assign a Password to the MultiVOIP for
Internet security. These applications enable remote viewing and...

52 MultiVOIP User Guide
Viewing Call Progress
The Call Progress dialog box displays the status of a call in progress. This dialog box is accessed
from the MultiVOIP Setup menu by clicking on the Call Progress button.
The ratio of Packets Lost versus Packets Received provides a general indication of the integrity of
the Internet connection. To reduce the frequency of lost packets, select a low-bit-rate coder, such as,
G.723 or Netcoder. In addition, enabling Forward Error Correction option in the Channel...

Chapter 5 - Remote Configuration and Management 

54 MultiVOIP User Guide
Introduction
This chapter provides procedures for viewing or changing the configuration of a remote unit.  Two
methods are provided to access a remote unit; the first method is modem based and the second
method is using IP.  Within the IP method, three applications can be used: 1) LAN-Based using TFTP
(Trivial lFile Transfer Protocol), 2)Telnet as a client application, or 3) a standard web browser on the
Internet.
Remote Configuration
Remote configuration requires the MultiVOIP...

55 Chapter 5 - Remote Configuration and Management
Verify that the Communication Type is set for COM Port and the Select Port field is set for
the COM port of your local PC.
In the Dial String field, enter the AT command for dialing (ATDT) plus the phone number of
the remote MultiVOIP.
If your Modem Initialization String, Initialization Response, or Connect Response values are
different than the defaults in the dialog box, refer to your modem user documentation and
change the default values to match your...

56 MultiVOIP User Guide
LAN-Based 
The LAN-based remote configuration requires a Windows Sockets compliant TCP/IP stack. TCP/IP
protocol software must be installed and functional before the configuration program can be used.
1 You must assign an Internet (IP) address for the PC and for each node that will be managed
by the configuration program. Refer to the protocol software documentation for instructions
on how to set the IP addresses.
Once you have completed this step, you should be able to use the...

57 Chapter 5 - Remote Configuration and Management
and field within a dialog box.
7 After you have changed the configuration of the remote MultiVOIP, click Download Setup to
update the configuration. The remote MultiVOIP will be brought down, the new configuration
written to the unit, and the unit will reboot.
8 Click Exit when the downloading is complete.
9 Double click on the MultiVOIP Configuration icon in the MultiVOIP program group to verify
that the MultiVOIP is running.   

58 MultiVOIP User Guide
Remote Management
This section describes typical client applications that can be used to configure the MultiVOIP
remotely. It is important to note that although any subsequent changes to configuration can be made
using these applications, the initial setup and configuration of the MultiVOIP must be done on the
local PC, using the MultiVOIP software provided with your unit.
Although establishing access to the MultiVOIP varies between applications, the configuration
functions mirror...

59 Chapter 5 - Remote Configuration and Management
MultiVOIP Telnet Server Menu
The MultiVOIP Telnet Server menu provides three basic options: Voice over IP Configuration, Phone
Directory Database, and Phone Directory Configuration. A further option enables you to close the
Telnet session.
Voice over IP Configuration
Selecting Option 1 displays the main menu, which allows further configuration options. These
options include Protocol Stacks (option 1), Applications (option 2), System Information (option...

60 MultiVOIP User Guide
WEB Management
The MultiVOIP can be accessed, via a standard Web browser, from anywhere on the connected
Internet. In order to provide this support, the WEB Server option has to be enabled from the Others
button in the main menu which displays the Applications Setup dialog box (see Chapter 4 - MultiVOIP
Software).
Once enabled, users can access the MultiVOIP by entering its IP address in the destination field of
their web browser. The following screen appears.
If a Password was...