Home
>
Multi-Tech Systems
>
Communications System
>
Multi-Tech Systems MultiVOIP Model Mvp400/800 Standalone Voice/ip Gateway User Guide
Multi-Tech Systems MultiVOIP Model Mvp400/800 Standalone Voice/ip Gateway User Guide
Here you can view all the pages of manual Multi-Tech Systems MultiVOIP Model Mvp400/800 Standalone Voice/ip Gateway User Guide. The Multi-Tech Systems manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 2
User Guide 88310600 Revision A MultiVOIP400 (Model MVP400) and MultiVOIP 800 (Model MVP 800) This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi- Tech Systems, Inc. All rights reserved. Copyright © 1999, by Multi-Tech Systems, Inc. Multi-Tech Systems, Inc. makes no representations or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose....
Page 3
iii Contents Chapter 1 - Introduction and Description Introduction ................................................................................................................................................ 6 Preview of this Guide ................................................................................................................................. 6 MultiVOIP Application...
Page 4
iv Chapter 5 - Remote Configuration and Management Introduction .............................................................................................................................................. 54 Remote Configuration .............................................................................................................................. 54 Modem-Based ................................................................................................................................... 54...
Page 6
6 MultiVOIP User Guide Introduction Welcome to Multi-Techs new standalone Voice/IP Gateways which allow analog voice and fax communication over an IP network. Multi-Tech’s new voice/fax over IP gateway technology allows voice and fax communication to ride, with no additional expense, over your existing IP network, which has traditionally been data-only. To access this free voice and fax communication, all you have to do is connect your MultiVOIP to your telephone equipment, and then to your existing...
Page 7
7 Chapter 1 - Introduction and Description Chapter 5 - Remote Configuration and Management Chapter 5 provides procedures for changing the configuration of a remote MultiVOIP. Remote configuration allows you to change the configuration of a unit by simply connecting two modems between the two MultiVOIPs and remotely controlling the unit. Chapter 5 also describes typical client applications (i.e., Telnet and Web-based management) used for remote configuration of the MultiVOIP. Chapter 6 - Warranty, Service...
Page 8
8 MultiVOIP User Guide MultiVOIP Application A typical Voice Over IP (VOIP) network is shown in Figure 1-2 with a headquarters site and three remote sites (Sales office, regional and marketing offices). This typical Voice Over IP network can be set up via the Internet or your Intranet. The headquarters site is set up with a 4-channel MultiVOIP (MVP 400) connected to the headquarters LAN and four voice/fax channels connected to the in- house telephone switch (PBX). Typically, the MultiVOIP at the...
Page 9
9 Chapter 1 - Introduction and Description Phone Directory Data Base Number Description Channel IP Address 101 Headquarters 1 201.23.122.118 Trunk Ext 4 102 Headquarters 2 201.23.122.118 Trunk Ext 5 103 Headquarters 3 201.23.122.118 Trunk Ext 6 104 Headquarters 4 201.23.122.118 Trunk Ext 7 201 Sales 1 205.24.123.119 KTS 201 202 Sales 2 205.24.123.119 PSTN 202 301 Regional 1 206.25.124.120 301 302 Regional 2 206.25.124.120 302 401 Marketing 1 207.26.125.121 Trunk Ext 9 402 Marketing 2...
Page 10
10 MultiVOIP User Guide Using the same example as above, but calling the Regional office. A person at headquarters would pick up a telephone and dial say trunk extension 5. This connects channel 2 of the headquarters MultiVOIP. A second dial tone is heard, then you would dial say 301. The telephone connected to channel 1 of the Regional office MultiVOIP rings and your voice conservation takes place. To call from Headquarters to Sales OfficeCall Process Pick up telephone and dial a trunk extension...