Home > Multi-Tech Systems > Communications System > Multi-Tech Systems Multivoip 200 Model Mvp200 Standalone Voice/ip Gateway Quick Start Guide

Multi-Tech Systems Multivoip 200 Model Mvp200 Standalone Voice/ip Gateway Quick Start Guide

Here you can view all the pages of manual Multi-Tech Systems Multivoip 200 Model Mvp200 Standalone Voice/ip Gateway Quick Start Guide. The Multi-Tech Systems manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 41

41 Deploy VOIP Network
If you are connecting an E&M trunk from a telephone
switch to your MultiVOIP, connect one end of an RJ-45
phone cord to the Voice/Fax Channel 1 E&M connector
on the back of the MultiVOIP and the other end to the
trunk phone jack.
If you are connecting to an E&M trunk, you need to ensure
that the E&M trunk jumper is in the correct position for the
E&M type trunk. The default E&M jumper position is E&M
type 2. To change the E&M jumper position, perform the
E&M jumper block...

Page 42

MultiVOIP Quick Start Guide
42
Limited Warranty
Multi-Tech Systems, Inc. (“MTS”) warrants that its products will
be free from defects in material or workmanship for a period of
two years from the date of purchase, or if proof of purchase is
not provided, two years from date of shipment. MTS MAKES
NO OTHER WARRANTY, EXPRESSED OR IMPLIED, AND
ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS  FOR A  PARTICULAR  PURPOSE ARE  HEREBY
DISCLAIMED. This warranty does not apply to any products
which have been...

Page 43

43 Warranty and Regulatory Information
Technical Support
Multi-Tech Systems has an excellent staff of technical support
personnel available to help you get the most out of your Multi-
Tech product. If you have any questions about the operation of
this unit, or experience difficulty during installation you can
contact Tech Support via the following:
Phone:
(800) 972-2439 (USA and Canada)
(612) 785-3500 (international and local)
Internet:
http://www.multitech.com/_forms/email_tech_support.htm
Please have...

Page 44

MultiVOIP Quick Start Guide
44
FCC Declaration
NOTE: This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates,
uses and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions, may cause harmful
interference to...

Page 45

45 

Page 46

82098175 
Start reading Multi-Tech Systems Multivoip 200 Model Mvp200 Standalone Voice/ip Gateway Quick Start Guide

Related Manuals for Multi-Tech Systems Multivoip 200 Model Mvp200 Standalone Voice/ip Gateway Quick Start Guide

All Multi-Tech Systems manuals