MSI Ms6728 Ver 1 Manual

Intel  ICH5R Serial ATA RAID Introduction
B-11
Select the volume and press  key to delete the RAID volume. The
following prompt appears:
Press  key to accept the volume deletion. 

MS-6728 ATX Mainboard
B-12
(3) Reset Disks to Non-RAID
Select option 3 Reset Disks to Non-RAID and press  to delete the
RAID volume and remove any RAID structures from the drives. The following
screen appears:
Press  key to accept the selection.
MSI  Reminds You...
1. You will lost all data on the RAID drives and any internal RAID
structures when you perform this operation.
2. Possible reasons to ‘Reset Disks to Non-RAID’ could include
issues such as incompatible RAID configurations or a failed
volume or...

Intel  ICH5R Serial ATA RAID Introduction
B-13
Install Driver in Windows XP / 2000
h New Windows XP / 2000 Installation
     The following details the installation of the drivers while installing Win-
dows XP / 2000.
1. Start the installation:
Boot from the CD-ROM. Press F6 when the message Press F6 if  you
need to install third party SCSI or RAID driver appears.
2. When the Windows XP Setup window is generated, press S to specify
an Additional Device(s).
3. Insert the driver diskette Intel IAA RAID XP...

MS-6728 ATX Mainboard
B-14
Installation of Intel Application Accelerator RAID Edition
The Intel Application Accelerator RAID Edition driver may be used to
operate the hard drive from which the system is booting or a hard drive that
contains important data. For this reason, you cannot remove or un-install this
driver from the system after installation; however, you will have the ability to
un-install all other non-driver components. The following non-driver compo-
nents can be un-installed:
h Intel...

Intel  ICH5R Serial ATA RAID Introduction
B-15
The InstallShield Wizard will begin automatically for installation showed
as following:
Click on the Next button to proceed the installation in the welcoming window. 

MS-6728 ATX Mainboard
B-16
After reading the license agreement in the following window, click Ye s
button to continue.
The window shows the components to be installed. Click Next button to
continue. 

Intel  ICH5R Serial ATA RAID Introduction
B-17
Select a program folder in the following window where you want Setup to
add the program icon.
Select the folder in which you want the program to be installed in the
following window, and click Next button to start installation. 

MS-6728 ATX Mainboard
B-18
Once the installation is complete, the following window appears.
The following window appears to show the Intel Application Accelerator
RAID Edition Setup installation status. 

Intel  ICH5R Serial ATA RAID Introduction
B-19
RAID Migration Instructions
The Intel Application Accelerator RAID Edition offers the flexibility to
upgrade from a single Serial ATA (SATA) hard drive to a two drive RAID 0 or
RAID 1 configuration when an additional SATA hard drive is added to the
system. This process will create a new RAID volume from an existing disk.
However, several important steps must be followed at the time the system is
first configured in order to take advantage of RAID when...

MS-6728 ATX Mainboard
B-20
Create RAID Volume from Existing Disk
To create a RAID volume from an existing disk, right-mouse click on
RAID Volume  and select Create From Existing Disk to create a new RAID
volume as the screen below. You may also use the RAID drop-down menu and
click on Create Volume from Existing Disk.
(1) Step 1 of 3: Select the source disk
For Step 1, select the source disk that you wish to use and then click Next.
It is very important to note which disk is the source disk (the one...