MSI Ms6728 Ver 1 Manual

3-32
MS-6728 ATX Mainboard
Set Supervisor/User Password
When you select this function, a message as below will appear on the
screen:
Type the password, up to six characters in length, and press .
The password typed now will replace any previously set password from CMOS
memory. You will be prompted to confirm the password. Retype the password
and press . You may also press  to abort the selection and not
enter a password.
To clear a set password, just press  when you are prompted to
enter the password. A...

3-33
BIOS Setup
Load High Performance/BIOS Setup Defaults
The two options on the main menu allow users to restore all of the BIOS
settings to High Performance defaults or BIOS Setup defaults. The High
Performance Defaults are the values set by the mainboard manufacturer for the
best system performance but probably will cause a stability issue. The BIOS
Setup Defaults are the default values also set by the mainboard manufacturer
for stable performance of the mainboard.
When you select Load High...

A-1
Using 4- or 6-Channel Audio Function
Appendix A: Using 2-, 4- & 6-Channel
   Audio Function
The mainboard is equipped with Realtek ALC655 chip, which provides
support for  6-channel audio output, including 2 Front, 2 Rear, 1 Center and 1
Subwoofer channel. ALC655 allows the board to attach 4 or 6 speakers for
better surround sound effect.  The section will tell you how to install and use
4-/6-channel audio function on the board. 

A-2
MS-6728 ATX Mainboard
Installing the Audio Driver
You need to install the driver for Realtek ALC655 chip to function properly
before you can get access to 4-/6-channel audio operations. Follow the
procedures described below to install the drivers for different operating systems.
Installation for Windows 98SE/ME/2000/XP
For Windows® 2000, you must install Windows® 2000 Service Pack2 or
later before installing the driver.
The following illustrations are based on Windows
® XP environment and
could look...

A-3
Using 4- or 6-Channel Audio Function
Click here
Click here
Select this
option
4.Click Finish to restart the system. 3.Click Next to install the AC’97 Audio software. 

A-4
MS-6728 ATX Mainboard
Software Configuration
After installing the audio driver, you are able to use the 4-/6-channel
audio feature now.  Click the audio icon          from the window tray at the lower-
right corner of the screen to activate the AC97 Audio Configuration.
Sound Effect
Here you can select a sound effect you like from the Environment list.
You may also edit the properties for an environment as you wish by
clicking the Edit button, then just scroll the bar in the bottom for each property...

A-5
Using 4- or 6-Channel Audio Function
Here it provides the Karaoke function which will automatically remove
human voice (lyrics) and leave melody for you to sing the song.  Note that this
function applies only for 2-channel audio operation.
Just check the Voice Cancellation box and then click OK to activate the
Karaoke function. 

A-6
MS-6728 ATX Mainboard
Equalizer
Here you regulate each equalizer for current playing digital sound sources.
You may choose the provided sound effects, and the equalizer will adjust
automatically. If you like, you may also load an equalizer setting or make an
new equalizer setting to save as an new one by using the buttons Load and
Save. Or you may click Reset to use the default value. 

A-7
Using 4- or 6-Channel Audio Function
Speaker Configuration
In this tab, you can easily configure your multi-channel audio function
and speakers.
1. Select the audio configuration below which is identical to the audio
jack in your mainboard. Since the audio port for this 865PE/G Neo2-P
mainboard is optional, you will have to choose either  6CH+ S/PDIF
(Coaxial) (for 865G Neo2-P & 865PE Neo2-P Option 1) or 6CH + S/
PDIF (Optical & Coaxial) (for 865PE Neo2-P Option 2).
1: For
865PE Neo2-P...

A-8
MS-6728 ATX Mainboard
2. Select a desired multi-channel operation from Number of Speaker.
a. Headphone for the common headphone
b. 2-Channel Mode for Stereo-Speaker Output
c. 4-Channel Mode for 4-Speaker Output
d. 6-Channel Mode for 5.1-Speaker Output
3. Here it shows the multi-channel setting for the audio jack. Please connect
your speakers to the correct phone jack in accordance with the setting
displayed here.
4. Then click  OK to apply the configuration.