MSI Click Bios 2 Manual

 ▶CPU Ratio Mode [Dynamic Mode]*
Selects the CPU Ratio operating mode. This item will appear when you set\
 the CPU 
ratio manually.
[Fixed Mode]
 Fixes the CPU ratio.  
[Dynamic Mode] 
 CPU ratio will be changed dynamically according to the CPU  load

ing.
 ▶Ring Ratio [Auto]
Sets the ring ratio. The valid value range depends on the installed CPU.\
 
 ▶ Adjusted Ring Frequency 
Shows the adjusted Ring frequency. Read-only.
 ▶ GT Ratio [Auto]
Sets the integrated graphics ratio. The valid value range...

 ▶CPU Base Clock Apply Mode [Auto]*
Sets the applying mode for adjusted CPU base clock. 
[Auto]
 This setting will be configured automatically by BIOS.
[Next Boot] 
 CPU will run the adjusted CPU base clock at next boot. 
[Immediate] 
 CPU runs the adjusted CPU base clock immediately.
[During Boot]
 CPU will run the adjusted CPU base clock during boot. 
 ▶ Direct OC Button [Enabled]
Enables or disables BCLK real-time increase/ decrease function via base \
clock control 
keys of HOTKEY funcion. 
 ▶ Direct...

 ▶Dynamic Frequency Search Step (MHz) [Auto]
Sets a increment/ value for each step of base clock optimization. If set\
 to  Auto,  
BIOS will configure this setting automatically. This item will be available when the 
Dynamic Frequency Search  is enabled.
 ▶BCLK Amplitude [Auto]
Sets the value for BCLK Amplitude for overclocking. Higher value might b\
enefit to 
get higher overclocking values.
 ▶ BCLK Slew Rate [Auto]
Sets the value for BCLK Slew Rate for overclocking. The value might vary\
 
depending...

 ▶Memory Fast Boot [Auto] *
Enables or disables the initiation and training for memory every booting\
.
[Auto]
 The setting will be configured automatically by BIOS.
[Enabled] 
System will completely keep the archives of first intiation and training\
 for 
memory. So the memory will not be initialed and trained when booting 
to accelerate the system booting time.
[Disabled]
 The memory will be initialed and trained every booting.  
 ▶ DigitALL Power
Press  to enter the sub-menu. Controls the digital...

 ▶CPU SA Over Voltage Protection [Auto]
Sets the voltage limit for CPU SA over-voltage protection. If set to Auto , BIOS will 
configure this setting automatically. Higher voltage provides less protection and 
may damage the system.
 ▶ CPU SA Under Voltage Protection [Auto]
Sets the voltage limit for CPU SA under-voltage protection. If set to  Auto, BIOS will 
configure this setting automatically. 
 ▶ CPU SA Over Current Protection [Auto] 
Sets the current limit for CPU SA over-current protection....

 ▶CPU Memory Changed Detect [Enabled]*
Enables or disables the system to issue a warning message during boot wh\
en the 
CPU or memory has been replaced.
[Enabled]
 The system will issue a warning message during boot and then you 
have to load the default settings for new devices.
[Disabled]
 Disables this function and keeps the current BIOS settings.
 ▶ OC Quick View Timer [3 Sec]*
Sets a time to allow the BIOS to show the variations of CPU base clock, \
CPU ratio, 
Ring ratio and DRAM ratio if any. If...

 ▶Execute Disable Bit [Enabled]
Intel’s Execute Disable Bit functionality can prevent certain classes\
 of malicious 
buffer overflow attacks where worms attempt to execute code to damage the 
system. It is recommended that keeps this item enabled always.
[Enabled]
 Enables NO-Execution protection to prevent the malicious

 attacks 
and worms. 
[Disabled]
 Disables this function.
 ▶ Intel Virtualization Tech [Enabled] 
Enables or disables Intel Virtualization technology. 
[Enabled]
 Enables Intel...

 ▶C1E Support [Disabled]
Enables or disables the C1E function for power-saving in halt state. Thi\
s item 
appears when  Intel C-State is enabled.
[Enabled]
 Enables C1E function to reduce the CPU frequency and vo

ltage for 
power-saving in halt state.
[Disabled]
 Disables this function.
 ▶ Package C State limit [Auto]
This item allows you to select a CPU C-state level for power-saving when\
 system is 
idle. The options of C-state depend on the installed CPU. This item appe\
ars when 
Intel C-State is...

M- FLASH
M-FLASH provides the way to update BIOS with a USB flash drive. Please download 
the latest BIOS file that matches your motherboard model from MSI websit\
e, save the 
BIOS file into your USB flash drive. And then follow the steps below to \
update BIOS. 
1.
Insert the USB flash drive that contains the update file into the comput\
er.
2.
Click on M-FLASH

 tab, a demand message will be prompted. Click on  Yes to
reboot and enter the flash mode.
3.The system will enter the flash mode and a file...

OC PROFILE
 ▶Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 management. Press  to enter\
 the sub-
menu.
 ▶ Set Name for Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Name the current overclocking profile. 
 ▶ Save Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Save the current overclocking profile.
 ▶ Load Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Load the current overclocking profile.
 ▶ Clear Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Clear the current overclocking profile.
 ▶ OC Profile Load from...