MSI Click Bios 2 Manual

Rear I/O Panel
PS/2LAN
USB 2.0/ 
HOTKEY
USB 2.0/
BIOS FLASHBACK+
USB 3.1 Gen1USB 3.1 Gen2
Audio Ports
Clear CMOS
USB 2.0
USB 3.1 Gen2 Type-C
Optical S/PDIF-Out 
DisplayPort
Link/ Activity LED
Status Description
Off
No link
Yellow Linked
Blinking Data activity
Speed LED
Status Description
Off 10 Mbps connection
Green 100 Mbps connection
Orange 1 Gbps connection
LAN Port LED Status Table
Audio Ports Configuration
Audio Ports Channel2 4 6 8
Center/ Subwoofer Out ● ●
Rear Speaker Out ● ● ●
Line-In/ Side...

Realtek HD Audio Manager
After installing the Realtek HD Audio driver, the Realtek HD Audio Manager 
icon will appear in the system tray. Double click on this icon to launch\
.
Jack Status
Device 
Selection
Connector 
Strings
Profiles
Main Volume Application 
Enhancement
Advanced 
Settings
 ●
Device Selection - allows you to select a audio output source to change the related 
options. The 
check sign indicates the devices as default.
 ●Application Enhancement  - the array of options will provide you a...

AUDIO INPUTRear FrontSide Center/ Subwoofer
Audio jacks to headphone and microphone diagram
Audio jacks to stereo speakers diagram
Audio jacks to 7.1- channel speakers diagram
AUDIO INPUT     

Overview of Components
CPUFAN1CPUFAN2
PCI_E1
PCI_E2
PCI_E3
JBAT1
PCI_E4
PCI_E5
PCI_E6
PCI_E7 CPU Socket
JPWR2
M2_1 M2_2 DIMM1
SYSFAN1 DIMM2DIMM3
DIMM4
OC1
RESET1
POWER1
FLASHB1
JUSB1
JUSB2
JFP1
JFP2
SYSFAN2
JAUD1 JTPM1 HOT_KEY1
SLOW_1 SYSFAN3
JPWR1
JUSB4
JUSB3
SATA1_2
SE1_43-SE2_65
JCI1 

Component Contents
Port NamePort TypePage
CPUFAN1~2,SYSFAN1~3 Fan Connectors 42
CPU Socket LGA1151 CPU Socket 29
DIMM1~4 DIMM Slots 30
FLASHB1 BIOS FLASHBACK+ Button 43
HOT_KEY1 HOTKEY Main Switch 44
JAUD1 Front Audio Connector 41
JBAT1 Clear CMOS (Reset BIOS) Jumper 45
JCI1 Chassis Intrusion Connector 43
JFP1, JFP2 Front Panel Connectors 39
JPWR1~2 Power Connectors 38
JTPM1 TPM Module Connector 41
JUSB1~2 USB 2.0 Connectors 41
JUSB3~4 USB 3.1 Gen1 Connectors 39
M2_1~2 M.2 Slots 34
OC1 GAME BOOST Knob...

CPU Socket
Introduction to the LGA 1151 CPU
The surface of the LGA 1151 CPU has 
two notches and a golden triangle to 
assist in correctly lining up the CPU for 
motherboard placement. The golden 
triangle is the Pin 1 indicator.
 Important
●Always unplug the power cord from the power outlet before installing or \
removingthe CPU.
●Please retain the CPU protective cap after installing the processor. MSI\
 will deal with Return Merchandise Authorization (RMA) requests if only the mothe\
rboard
comes with...

DIMM Slots
DIMM1DIMM3
Channel AChannel B
DIMM2DIMM4
Memory module installation recommendation
DIMM4DIMM4DIMM3DIMM2DIMM2DIMM2DIMM1
 Important
●Always insert memory modules in the DIMM2 slot first.
●Due to chipset resource usage, the available capacity of memory will be \
a little lessthan the amount of installed.
●Based on Intel CPU specification, the Memory DIMM voltage below 1.35V is\
suggested to protect the CPU.
●Please note that the maximum capacity of addressable memory is 4GB or le\
ssfor 32-bit...

PCI_E1~7: PCIe Expansion Slots
PCI_E1: PCIe 3.0 x1 slot 
PCI_E2: PCIe 3.0 x16 slot 
PCI_E3: PCIe 3.0 x1 slot 
PCI_E4: PCIe 3.0 x1 slot 
PCI_E5: PCIe 3.0 x8 slot 
PCI_E6: PCIe 3.0 x1 slot 
PCI_E7: PCIe 3.0 x4 slot 
x16x8
x8 x8
x8 x4
Multiple graphics cards installation recommendation
 Important
●The M2_1 slot will only run PCIe 3.0x2 
speed when M2_1 slot is installed 
with a M.2 PCIe device and PCI_E4  slot is installed with a PCIe x1 device at the same time.
●The PCI_E7 slot will slow down fromx4 to x2,...

Installing SLI graphics cards
For power supply recommendations for SLI configurations, please refer to\
 the user 
guide of your graphics card to make sure you meet all the system require\
ments.
To install SLI graphics cards:
1.
Turn off your computer and disconnect the power cord, install two graphi\
cs cards
into the 
PCI_E2 and PCI_E5 slots.
2.
Connect the two cards together using the  SLI Bridge Connector.
3.Connect all PCIe power connectors of the graphics cards.
4.
Reconnect the power cord, power...

SATA1~6: SATA 6Gb/s Connectors
These connectors are SATA 6Gb/s interface ports. Each connector can conn\
ect to 
one SATA device.
SATA1
SATA5
SATA4 SATA2
SATA6 SATA3
SE1_43-SE2_65: SATAe Connectors
These connectors are SATAe (SATA Express) interface ports. Each SATAe \
connector 
can be used with a single SATAe device or two legacy SATA devices.
SATA3 SATA5
SATA4 SATA6
SATAe1 SATAe2
 Important
●Please do not fold the SATA or SATAe cable at a 90-degree angle. Data lo\
ss mayresult during transmission...