Motorola Wing 5 Manual

USER EXEC MODE COMMANDS 2 - 25
•  crypto pki import [certificate|crl]   {background 
{on }|on }
[generate-rsa-key|
use-rsa-key] 
Generates a new RSA Keypair, or uses an existing RSA Keypair
 generate-rsa-key – Generates a new RSA Keypair for digital authentication
 use-rsa-key – Uses an existing RSA Keypair for digital authentication
  – If generating a new RSA Keypair, specify a name for it.
If using an existing RSA Keypair, specify its name.
subject-name 
Specify a subject name to identify the...

2 - 26 WiNG CLI Reference Guide
• crypto pki import trustpoint   {background {on 
}|on }
• crypto pki zeroise trustpoint  {del-key {on }|
on }
background 
{on }Optional. Performs the import operation in the background
 on  – Optional. Performs the import operation on a specified device
  – Specify the name of the AP or wireless controller.
on  Optional. Performs the import operation on a specified device
  – Specify the name of the AP or wireless controller.
pki Enables PKI management. Use this command...

USER EXEC MODE COMMANDS 2 - 27
Examples
rfs7000-37FABE#crypto key generate rsa key 1025
RSA Keypair successfully generated
rfs7000-37FABE#
rfs7000-37FABE#crypto key import rsa moto123 url passphrase word background on 
rfs7000-37FABE
RSA key import operation is started in background
rfs7000-37FABE#
rfs7000-37FABE#crypto pki generate self-signed word generate-rsa-key word autogen-
subject-name fqdn word
Successfully generated self-signed certificate
rfs7000-37FABE#
rfs7000-37FABE#crypto pki zeroize...

2 - 28 WiNG CLI Reference Guide
2.1.8 disable
User Exec Commands
Turns off (disables) the privileged mode command set. This command returns to the User Executable mode.
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
disable
Parameters
None
Examples
rfs7000-37FABE#disable
rfs7000-37FABE> 

USER EXEC MODE COMMANDS 2 - 29
2.1.9 enable
User Exec Commands
Turns on (enables) the privileged mode command set. This command does not do anything in the Privilege Executable 
mode.
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
enable
Parameters
None
Examples
rfs7000-37FABE>enable
rfs7000-37FABE# 

2 - 30 WiNG CLI Reference Guide
2.1.10 exit
User Exec Commands
Ends the current CLI session and closes the session window
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
exit
Parameters
None
Examples
rfs7000-37FABE>exit 

USER EXEC MODE COMMANDS 2 - 31
2.1.11 logging
User Exec Commands
Modifies message logging settings
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
logging monitor {|alerts|critical|debugging|emergencies|errors|
informational|warnings|notifications}
Parameters
• logging monitor {|alerts|critical|debugging|emergencies|errors|
informational|warnings|notifications}
Examples
rfs7000-37FABE>logging monitor warnings ?
rfs7000-37FABE>
rfs7000-37FABE>logging...

2 - 32 WiNG CLI Reference Guide
2.1.12 mint
User Exec Commands
Uses MiNT protocol to perform a ping and a traceroute to a remote device
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
mint [ping|traceroute]
mint ping  {count []|size []|timeout []}
mint traceroute  {destination-port []|max-hops []|
source-port []|timeout []}
Parameters
• mint ping  {count []|size []|timeout []}
• mint traceroute  {destination-port []|max-hops []|
source-port...

USER EXEC MODE COMMANDS 2 - 33
Examples
rfs7000-37FABE>mint ping 70.37.FA.BF count 20 size 128
MiNT ping 70.37.FA.BF with 128 bytes of data.
 Response from 70.37.FA.BF: id=1 time=0.292 ms
 Response from 70.37.FA.BF: id=2 time=0.206 ms
 Response from 70.37.FA.BF: id=3 time=0.184 ms
 Response from 70.37.FA.BF: id=4 time=0.160 ms
 Response from 70.37.FA.BF: id=5 time=0.138 ms
 Response from 70.37.FA.BF: id=6 time=0.161 ms
 Response from 70.37.FA.BF: id=7 time=0.174 ms
 Response from 70.37.FA.BF: id=8...

2 - 34 WiNG CLI Reference Guide
2.1.13 no
User Exec Commands
Use the no command to revert a command or to set parameters to their default. This command is useful to turn off an 
enabled feature or set default values for a parameter.
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
no [adoption|captive-portal|crypto|debug|logging|page|service|terminal|wireless]
no adoption {on }
no captive-portal client [captive-portal |] 
{on }
no crypto pki...