Home > Motorola > Wireless > Motorola Wing 5 Manual

Motorola Wing 5 Manual

Here you can view all the pages of manual Motorola Wing 5 Manual. The Motorola manuals for Wireless are available online for free. You can easily download all the documents as PDF.

Overview View all the pages Comments

Page 51

USER EXEC MODE COMMANDS 2 - 5
Parameters
• ap-upgrade [|all] {no-reboot|reboot-time |upgrade-time  
{no-reboot|reboot-time }}
• ap-upgrade [ap621|ap650|ap6511|ap6521|ap6532|ap71xx] all {no-reboot|reboot-time 
|upgrade-time  {no-reboot|reboot-time }}
[|all] Upgrades firmware on a specified AP or all APs adopted by the wireless controller
  – Specify the MAC address or hostname of the AP.
 all – Upgrades all APs adopted by the wireless controller
no-reboot Optional. Disables automatic reboot after a...

Page 52

2 - 6 WiNG CLI Reference Guide
• ap-upgrade cancel-upgrade [|all]
• ap-upgrade cancel-upgrade [ap621|ap650|ap651|ap6521|ap6532|ap71xx] all
• ap-upgrade cancel-upgrade on rf-domain [|all]
• ap-upgrade load-image [ap621|ap650|ap6511|ap6521|ap6532|ap71xx] 
cancel-upgrade [
|all]Cancels scheduled firmware upgrade on a specified AP or all APs adopted by the 
wireless controller
  – Specify the MAC address or hostname of the AP.
 all – Cancels scheduled upgrade on all APs
cancel-upgrade...

Page 53

USER EXEC MODE COMMANDS 2 - 7
• ap-upgrade rf-domain [|all] [all|ap621|ap650|ap6511|
ap6521|ap6532|ap71xx] {no-reboot|no-via-rf-domain|reboot-time |
upgrade-time }
rf-domain 
[|all]Upgrades AP firmware on devices in a specified RF Domain or all RF Domains
  – Upgrades firmware in a specified RF Domain. Specify the 
RF Domain name.
 all – Upgrades firmware on all RF Domains
[all|ap621|ap650|ap6511|ap652
1|ap6532|ap71xx]After specifying the RF Domain, select the AP type.
 all – Upgrades firmware on all...

Page 54

2 - 8 WiNG CLI Reference Guide
Examples
rfs7000-37FABE>ap-upgrade ap621 all
--------------------------------------------------------------------------
         CONTROLLER           STATUS                    MESSAGE
--------------------------------------------------------------------------
  00-15-70-37-FA-BE           Success         Queued 0 APs to upgrade
--------------------------------------------------------------------------
rfs7000-37FABE>
rfs7000-37FABE>ap-upgrade all
rfs7000-37FABE>...

Page 55

USER EXEC MODE COMMANDS 2 - 9
2.1.2 change-passwd
User Exec Mode Commands
Changes the password of a logged user. When this command is executed without any parameters, the password can be 
changed interactively.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
change-passwd { }
Parameters
• change passwd { }
Usage Guidelines
A password must be from 1 - 64 characters.
Examples
rfs7000-37FABE#change-passwd
Enter old...

Page 56

2 - 10 WiNG CLI Reference Guide
2.1.3 clear
User Exec Commands
Clears parameters, cache entries, table entries, and other similar entries. The clear command is available for specific 
commands only. The information cleared varies depending on the mode where the clear command is executed.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
clear [arp-cache|cdp|crypto|event-history|ip|lldp|spanning-tree]
clear...

Page 57

USER EXEC MODE COMMANDS 2 - 11
• clear [cdp|lldp] neighbors {on }
• clear crypto [ipsec|isakmp] sa [|all] {on }
• clear event-history
• clear ip dhcp bindings [|all]
• clear spanning-tree detected-protocols {on }
cdp Clears Cisco Discovery Protocol (CDP) table entries
lldp Clears Link Layer Discovery Protocol (LLDP) table entries
neighbors Clears CDP or LLDP neighbor table entries based on the option selected in the preceding 
step
on  Optional. Clears CDP or LLDP neighbor table entries on a specified AP...

Page 58

2 - 12 WiNG CLI Reference Guide
• clear spanning-tree detected-protocols {interface [|ge |
me1|port-channel |vlan ]} {on }
Examples
rfs7000-37FABE>clear crypto isakmp sa 111.222.333.01 on rfs7000-37FABE
rfs7000-37FABE>
rfs7000-37FABE>clear event-history
rfs7000-37FABE>
rfs7000-37FABE>clear spanning-tree detected-protocols interface port-channel 1 on 
rfs7000-37FABE
rfs7000-37FABE>
rfs7000-37FABE>clear ip dhcp bindings 172.16.10.9 on rfs7000-37FABE
rfs7000-37FABE>
rfs7000-37FABE>clear cdp neighbors on...

Page 59

USER EXEC MODE COMMANDS 2 - 13
2.1.4 clock
User Exec Commands
Sets a device’s system clock
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
clock set     {on }
Parameters
• clock set     {on }
Examples
rfs7000-37FABE>clock set 18:16:30 7 JUL 2011 on rfs7000-37FABE
clock set 18:16:30 7 JUL 2011 on rfs7000-37FABE
rfs7000-37FABE>
clock set Sets a device’s software system clock
 Sets the current time (in military...

Page 60

2 - 14 WiNG CLI Reference Guide
2.1.5 cluster
User Exec Commands
Initiates cluster context. The cluster context provides centralized management to configure all cluster members from any 
one member.
Commands executed under this context are executed on all members of the cluster.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
cluster start-selection
Parameters
• cluster start-selection
Examples...

Start reading Motorola Wing 5 Manual
All Motorola manuals