Motorola Wing 5 Manual

GLOBAL CONFIGURATION COMMANDS 4 - 55
4.1.17.2 device-categorization-mode commands
device-categorization
Table 4.7 summarizes device categorization mode commands
Table 4.7device-categorization-mode commands
Command Description Reference
mark-deviceAdds a device to the device categorization listpage 4-56
noRemoves a device from the device categorization listpage 4-58
clrscrClears the display screenpage 5-3
commitCommits (saves) changes made in the current sessionpage 5-4
doRuns commands from EXEC modepage...

4 - 56 WiNG CLI Reference Guide
4.1.17.2.1  mark-device
device-categorization-mode commands
Adds a device to the device categorization list as sanctioned or neighboring. Devices are further classified as AP or client.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
mark-device [sanctioned|neighboring] [ap|client]
mark-device [sanctioned|neighboring] ap [|any] ssid [|any]
mark-device [sanctioned|neighboring]...

GLOBAL CONFIGURATION COMMANDS 4 - 57
Examples
rfs7000-37FABE(config-device-categorization-RFS7000)#mark-device sanctioned ap any 
ssid any
rfs7000-37FABE(config-device-categorization-RFS7000)#
rfs7000-37FABE(config-device-categorization-RFS7000)#mark-device neighboring client 
11-22-33-44-55-66
rfs7000-37FABE(config-device-categorization-RFS7000)#
Related Commands
neighboring Marks the wireless client as neighboring. A neighboring device is a neighbor in the same 
network as this device.
client [|any]...

4 - 58 WiNG CLI Reference Guide
4.1.17.2.2  no
device-categorization-mode commands
Removes a device from the device categorization list
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
no mark-device [neighboring|sanctioned] [ap|client] [|any]
mark-device [sanctioned|neighboring] client [|any]
mark-device [sanctioned|neighboring] ap [|any] ssid [|any]
Parameters
• no mark-device [sanctioned|neighboring] ap [|any]...

GLOBAL CONFIGURATION COMMANDS 4 - 59
• no mark-device [sanctioned|neighboring] client [|any]
Examples
rfs7000-37FABE(config-device-categorization-RFS7000)#no mark-device authorized ap any 
ssid 1
%% Error: Parsing cmd line
rfs7000-37FABE(config-device-categorization-RFS7000)#
Related Commands
no mark-device Removes a device from the marked device list
sanctioned Marks the wireless client as sanctioned. A sanctioned device is authorized to use 
network resources by providing correct credentials....

4 - 60 WiNG CLI Reference Guide
4.1.18 dhcp-server-policy
Global Configuration Commands
Configures DHCP server policy parameters, such as class, address range, and options. A new policy is created if it does 
not exist.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
dhcp-server-policy 
Parameters
• dhcp-server-policy 
Examples
rfs7000-37FABE(config)#dhcp-policy test
rfs7000-37FABE(config)#?
Related Commands...

GLOBAL CONFIGURATION COMMANDS 4 - 61
4.1.19 dns-whitelist
Global Configuration Commands
Configures a whitelist of devices permitted to access the wireless controller managed network or a hotspot
Table 4.8Critical Resource Policy Commands
Command Description Reference
dns-whitelistConfigures the DNS whitelistpage 4-62 

4 - 62 WiNG CLI Reference Guide
4.1.19.1 dns-whitelist
dns-whitelist
Configures a DNS whitelist. A DNS whitelist is a list of domains allowed access to the wireless controller managed 
network.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
dns-whitelist 
Parameters
dns-whitelist 
Examples
rfs7000-37FABE(config-dns-whitelist-test)#?
DNS Whitelist Mode commands:
  no       Negate a command or set its defaults...

GLOBAL CONFIGURATION COMMANDS 4 - 63
4.1.19.2 dns-whitelist mode commands
dns-whitelist
Table 4.9 summarizes DNS white list mode commands
Table 4.9dns-whitelist commands
Command Description Reference
permitMatches a hostpage 4-64
noNegates a command or sets its default valuespage 4-65
clrscrClears the display screenpage 5-3
commitCommits (saves) changes made in the current sessionpage 5-4
doRuns commands from EXEC modepage 4-66
endEnds and exits the current mode and moves to the PRIV EXEC modepage 5-5...

4 - 64 WiNG CLI Reference Guide
4.1.19.2.1  permit
dns-whitelist mode commands
A whitelist is a list of host names and IP addresses permitted access to the wireless controller managed network or captive 
portal. This command adds a device by its hostname or IP address to the DNS whitelist.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
permit  {suffix}
Parameters
• permit  {suffix}
Examples...