Motorola Wing 5 Manual

GLOBAL CONFIGURATION COMMANDS 4 - 35
4.1.12.2.13 webpage
captive-portal-mode commands
Configures Web pages displayed when interacting with a captive portal. There are four (4) different pages.
 agreement – This page displays “Terms and Conditions” that a user needs to accept before allowed access to the 
captive portal.
 fail – This page is displayed when the user is not authenticated to use the captive portal.
 login – This page is displayed when the user connects to the captive portal. Use this page...

4 - 36 WiNG CLI Reference Guide
• webpage internal [agreement|fail|login|welcome] description|footer|header|title] 

• webpage internal [agreement|fail|login|welcome] [main-logo|small-logo] 
Examples
rfs7000-37FABE(config-captive-portal-test)#webpage external fail www.symbol.com
rfs7000-37FABE(config-captive-portal-test)#
Related Commands
welcome Indicates the page is displayed after a user has successfully logged in to the captive portal
 Indicates the URL to the Web page displayed
internal Indicates...

GLOBAL CONFIGURATION COMMANDS 4 - 37
4.1.13 clear
Global Configuration Commands
Clears parameters, cache entries, table entries, and other similar entries. The clear command is available for specific 
commands only. The information cleared using this command varies depending on the mode where executed.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
clear event-history
Parameters
• clear event-history
Examples...

4 - 38 WiNG CLI Reference Guide
4.1.14 critical-resource-policy
Global Configuration Commands
Creates a critical resource monitoring policy. A critical resource is a device (wireless controller, router, gateway, etc.) 
considered critical to the health of the wireless controller. This is a list of IP addresses pinged regularly by the wireless 
controller. If there is a connectivity issue with a device on the critical resource list, an event is generated stating a critical 
resource is unavailable. The...

GLOBAL CONFIGURATION COMMANDS 4 - 39
4.1.14.1 critical-resource-policy
critical-resource-policy
Creates or enters a Critical-resource Monitoring (CRM) policy. If the defined policy is not present, it is created.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
critical-resource-policy 
Parameters
• critical-resource-policy 
Examples
rfs7000-37FABE(config)#critical-resource-policy test...

4 - 40 WiNG CLI Reference Guide
4.1.14.2 critical-resource-policy-mode
Table 4.5 summarizes critical resource monitoring policy commands
Table 4.5critical-resource-policy
Command Description Reference
monitorPerforms critical resource monitoringpage 4-41
noCancels the monitoring of a critical resourcepage 4-43
clrscrClears the display screenpage 5-3
commitCommits (saves) changes made in the current sessionpage 5-4
doRuns commands from the EXEC modepage 4-66
endEnds and exits the current mode and moves to...

GLOBAL CONFIGURATION COMMANDS 4 - 41
4.1.14.2.1  monitor
critical-resource-policy-mode
Monitors critical resources. Use this command to configure a critical policy and set the interval the availability of the 
critical resource is checked.
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
monitor [|ping-interval
monitor [ping-interval ]
monitor  ping-mode [arp-icmp|arp-only vlan ]
Parameters
• monitor ping-interval 
• monitor  ping-mode...

4 - 42 WiNG CLI Reference Guide
Examples
rfs7000-37FABE(config-critical-resource-policy-test)#monitor ping-interval 10
rfs7000-37FABE(config-critical-resource-policy-test)#
rfs7000-37FABE(config-critical-resource-policy-test)#monitor 172.16.10.2 ping-mode 
arp-only vlan 1
rfs7000-37FABE(config-critical-resource-policy-test)#
Related Commands
noResets or disables critical resource policy commands 

GLOBAL CONFIGURATION COMMANDS 4 - 43
4.1.14.2.2  no
critical-resource-policy-mode
Removes a device from the critical resource list. This command also resets the ping interval to its default.
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
no monitor [|ping-interval]
Parameters
• no monitor [|ping-interval]
Examples
rfs7000-37FABE(config-critical-resource-policy-test)#no monitor 172.16.10.2
rfs7000-37FABE(config-critical-resource-policy-test)#...

4 - 44 WiNG CLI Reference Guide
4.1.15 customize
Global Configuration Commands
Customizes the output of the summary CLI commands. Use this command to define the data displayed as a result of various 
show commands.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
customize [hostname-column-width|show-wireless-client|show-wireless-client-stats|...