Motorola Wing 5 Manual

GLOBAL CONFIGURATION COMMANDS 4 - 45
• customize show-wireless-client (ap-name ,auth,bss,enc,hostname ,ip,
last-active,location ,mac,radio-alias ,radio-id,radio-type,state,
username ,vendor,vlan,wlan)
show-wireless-client Customizes the columns displayed for the show wireless client command
ap-name  Includes the ap-name column in the show wireless client command.
  – Specify the ap-name column width from 1 - 64 characters.
auth Includes the auth column in the show wireless client command. The auth column...

4 - 46 WiNG CLI Reference Guide
• customize show-wireless-client-stats (hostname ,mac,rx-bytes,rx-errors,
rx-packets,rx-throughput,tx-bytes,tx-dropped,tx-packets,tx-throughput)
• customize show-wireless-client-stats-rf (average-retry-number,error-rate,
hostname ,mac,noise,q-index,rx-rate,signal,snr,t-index,tx-rate)
vlan Includes the VLAN column in the show wireless client command. The VLAN column displays 
the VLAN assigned to the wireless client.
wlan Includes the WLAN column in the show wireless client...

GLOBAL CONFIGURATION COMMANDS 4 - 47
• customize show-wireless-radio (adopt-to,ap-name ,channel,location ,
num-clients,power,radio-alias ,radio-id,radio-mac,rf-mode,state)
hostname  Includes the hostname column in the show wireless client statistics RF command. The 
hostname column displays the hostname of the wireless client.
  – Specify the hostname column width from 1 - 64 characters.
mac Includes the MAC column in the show wireless client statistics RF command. The MAC 
column displays the MAC...

4 - 48 WiNG CLI Reference Guide
• customize show-wireless-radio-stats (radio-alias ,radio-id,radio-mac,
rx-bytes,rx-errors,rx-packets,rx-throughput,tx-bytes,tx-dropped,tx-packets,
tx-throughput)
radio-alias  Includes the radio-alias column in the show wireless radio command. The radio-alias 
column displays the radio alias along with the APs hostname and the radio interface 
number in the “HOSTNAME:RX” formate.
  – Specify the radio-alias column width from 3 - 67 characters.
radio-id Includes the...

GLOBAL CONFIGURATION COMMANDS 4 - 49
• customize show-wireless-radio-stats-rf (average-retry-number,error-rate,noise,
q-index,radio-alias ,radio-id,radio-mac,rx-rate,signal,snr,t-index,
tx-rate)
tx-packets Includes the tx-packets column in the show wireless radio statistics command. The 
tx-packets column displays the total number of packets transmitted by the wireless radio.
tx-throughput Includes the tx-throughput column in the show wireless radio statistics command. The 
tx-throughput column displays...

4 - 50 WiNG CLI Reference Guide
Examples
rfs7000-37FABE(config)*#customize show-wireless-client ap-name auth
rfs7000-37FABE(config)*#commit
rfs7000-37FABE(config)*#show wireless client
-----------------------
          AP-NAME  AUTH
-----------------------
-----------------------
Total number of wireless clients displayed: 0
rfs7000-37FABE(config)*#
Related Commands
noResets values or disables commands
wirelessDisplays wireless configuration and other information 

GLOBAL CONFIGURATION COMMANDS 4 - 51
4.1.16 device
Global Configuration Commands
Enables simultaneous configuration of multiple devices
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
device {containing|filter}
device
device containing  {filter type [ap621|ap650|ap6511|ap6521|ap6532|ap71xx|
rfs4000|rfs6000|rfs7000]}
device filter type [ap621|ap650|ap6511|ap6521|ap6532|ap71xx|rfs4000|rfs6000|
rfs7000]
Parameters...

4 - 52 WiNG CLI Reference Guide
• device filter type [ap621|ap650|ap6511|ap6521|ap6532|ap71xx|rfs4000|rfs6000|
rfs7000]
rfs7000-37FABE(config)#device containing ap filter type AP71XX
% Error: Parsing cmd line (1)
rfs7000-37FABE(config)#
rfs7000-37FABE(config)#device containing ap filter type ap4600
rfs7000-37FABE(config-device-{type: ap650, con)#
Related Commands
ap71xx Optional. Filters out devices other than AP71XXs
rfs4000 Optional. Filters out devices other than RFS4000s
rfs6000 Optional. Filters out...

GLOBAL CONFIGURATION COMMANDS 4 - 53
4.1.17 device-categorization
Global Configuration Commands
Categorizes devices as sanctioned or neighboring. Categorization of devices enables quick identification and blocking of 
rogue/unsanctioned devices in the wireless controller managed network.
Table 4.6Critical Resource Policy Commands
Command Description Reference
device-categorizationConfigures a device categorization listpage 4-54 

4 - 54 WiNG CLI Reference Guide
4.1.17.1 device-categorization
device-categorization
Configures a device categorization list. This list categorizes devices as sanctioned or neighboring. This information 
determines which devices are allowed access to the wireless controller managed network and which are rogue devices.
If a device categorization list does not exist, it is created.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000...