Motorola Wing 5 Manual

WLAN-QOS-POLICY 23 - 15
23.1.8 voice-prioritization 
wlan-qos-policy
Prioritizes voice clients over other clients (for non-WMM clients). This feature is enabled by default.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
voice-prioritization
Parameters
None
Examples
rfs7000-37FABE(config-wlan-qos-test)#voice-prioritization
rfs7000-37FABE(config-wlan-qos-test)#
rfs7000-37FABE(config-wlan-qos-test)#show context...

23 - 16 WiNG CLI Reference Guide
23.1.9 wmm
wlan-qos-policy
Configures 802.11e/wireless multimedia parameters for this WLAN QoS policy
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
wmm [background|best-effort|power-save|qbss-load-element|video|voice]
wmm [power-save|qbss-load-element]
wmm [background|best-effort|video|voice] [aifsn |cw-max |
cw-min |txop-limit ]
Parameters
• wmm [power-save|qbss-load-element]...

WLAN-QOS-POLICY 23 - 17
video Configures video access category parameters
voice Configures voice access category parameters
aifsn  Configures Arbitrary Inter-Frame Space Number (AIFSN) from 2 - 15. AIFSN is the wait 
time between data frames. This parameter is common to background, best effort, video 
and voice.
The default for traffic voice categories is 2
The default for traffic video categories is 2
The default for traffic best effort (normal) categories is 3
The default for traffic background (low)...

23 - 18 WiNG CLI Reference Guide
Examples
rfs7000-37FABE(config-wlan-qos-test)#wmm background aifsn 7
rfs7000-37FABE(config-wlan-qos-test)#wmm video txop-limit 9
rfs7000-37FABE(config-wlan-qos-test)#wmm voice cw-min 6
rfs7000-37FABE(config-wlan-qos-test)#wmm qbss-load-element
rfs7000-37FABE(config-wlan-qos-test)#show context
wlan-qos-policy test
 classification non-wmm video
 svp-prioritization
 voice-prioritization
 wmm video txop-limit 9
 wmm voice cw-min 6
 wmm voice cw-max 6
 multicast-mask primary...

CHAPTER 24 INTERFACE-RADIO 
COMMANDS
Use the (config-profile-default-RFS4000) instance to configure radio instances associated with the wireless controller.
To switch to this mode, use:
RFS4000-37FAB(config-profile-default-RFS4000)#interface radio ?
  1  Radio interface 1
  2  Radio interface 2
  3  Radio interface 3
RFS4000-37FABE(config-profile-default-RFS4000)#interface radio
RFS4000-880DA7(config-profile-default-RFS4000-if-radio1)#?
Radio Mode commands:
  ack-timeout              Configure the 802.11...

24 - 2 WiNG CLI Reference Guide
  rts-threshold            Configure the RTS threshold
  shutdown                 Shutdown the selected radio interface
  sniffer-redirect         Capture packets and redirect to an IP address
                           running a packet capture/analysis tool
  use                      Set setting to use
  wireless-client          Configure wireless client related parameters
  wlan                     Enable wlans on this radio
  clrscr                   Clears the display...

INTERFACE-RADIO COMMANDS 24 - 3
24.1 interface-radio Instance
Table 24.1 summarizes interface radio commands
Table 24.1Interface Radio Instance commands
Commands Description Reference
ack-timeoutConfigures the 802.11 ACK timeout periodpage 24-5
aggregationConfigures 802.11n aggregation parameterspage 24-6
airtime-fairnessEnables fair access for clients based on airtime usagepage 24-9
antenna-gainSpecifies the antenna gain of the selected radiopage 24-10
antenna-modeConfigures the radio antenna modepage...

24 - 4 WiNG CLI Reference Guide
sniffer-redirectCaptures and redirects packets to an IP address running a packet capture/
analysis toolpage 24-39
useApplies other configuration profiles or values on the current configuration 
itempage 24-40
wireless-clientConfigures wireless client related parameterspage 24-41
wlanEnables a radio WLANpage 24-42
clrscrClears the display screenpage 5-3
commitCommits (saves) changes made in the current sessionpage 5-4
doRuns commands from EXEC modepage 4-66
endEnds and...

INTERFACE-RADIO COMMANDS 24 - 5
24.1.1 ack-timeout
interface-radio Instance
Configures the 802.11 ACK timeout period. When a packet is sent out from one wireless client to another, it waits for an 
acknowledgement (ACK) frame from the receiving client. If an ACK is not received within the specified timeout period, the 
packet is re-transmitted resulting in reduced throughput.
Supported in the following platforms:
 RFS4011
Syntax
ack-timeout 
Parameters
• ack-timeout 
Examples...

24 - 6 WiNG CLI Reference Guide
24.1.2 aggregation
interface-radio Instance
Configures 802.11n frame aggregation. Frame aggregation increases throughput by sending two or more data frames in a 
single transmission. There are two types of frame aggregation: MAC Service Data Unit (MSDU) aggregation and MAC 
Protocol Data Unit (MPDU) aggregation. Both modes group several data frames into one large data frame.
Supported in the following platforms:
 RFS4011
Syntax
aggregation [ampdu|amsdu]
aggregation ampdu...