Home > Motorola > Bluetooth Headset > Motorola Sliver 2 Manual

Motorola Sliver 2 Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Motorola Sliver 2 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 249 Motorola manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							10Basics EN
    Charge Case Status Light
    music
    To stream music from your device to the 
    headset, start and control music playback from 
    the device.Light shows… Your case is…
    flashing  red being charged, battery 
    at low power
    flashing  yellow being charged, battery  at medium power
    flashing  green being charged, battery  at high power
    steady red less than 30%  ch ar ge d
    steady yellow 30% to 70% charged
    steady green fully charged 
    						
    							ENBasics11
    Music pauses when you make or receive a call, 
    and resumes playing when the call ends.
    Note: This feature is phone dependent.
    Clean & dry
    To get the most from your headset, keep it clean 
    and dry.
    High humidity or perspiration can make the 
    ear fitting feel slippery. Wipe the ear fitting 
    with a soft cloth to remove dirt and moisture.
    Note:  Be very careful when wiping near the 
    speaker.
     Check for and remove any debris that may 
    be blocking the small microphone ports near 
    the Call button. 
    						
    							12Advanced EN
    Advancedmore clever stuff
    Second device
    Do you use two phones? Or maybe a phone and 
    a tablet? Connect with both of them.
      1Pair each device with the headset as normal 
    (see “Connect & go ” on page 6). You don’t have 
    to turn off the first device to pair with the 
    second one, as long as it’s done within five 
    minutes of turning on the headset.
    2 Once paired, to connect with both devices 
    simply turn them on. You’ll hear 
    “device  connected” as each 
    device connects with your headset. 
    						
    							ENAdvanced13
    Notes: 
     Two phones connected, not on a call:  Press 
    the Call button to activate voice recognition on 
    the first phone. Double-press it to activate 
    voice recognition on the second phone.
     Two phones connected, single held call:  
    Press the Call button to return to the call on 
    the first phone. Double-press it to return to 
    the call on the second phone.
    Caller ID
    Note:  This feature is phone/network dependent.
    If the phone supports the Phonebook Access 
    profile, you’ll hear “ call from ” 
    when the contact info is stored on your phone.
    Note:  This feature doesn’t work when you’re on 
    a call and you receive a second incoming call. 
    						
    							14Advanced EN
    Battery readout
    When you’re not in a call, press the Volume Up 
    and Volume Down buttons to hear how much 
    battery talk-time is left on your headset.
    Settings
    Press and hold the Call button while turning on 
    the headset, then follow the voice prompts to 
    turn these features on/off:
     Restore Factory Settings : Reset default 
    settings on your headset.
    Caution:  This feature erases all pairing 
    information stored on the headset.
     : Turn voice prompts on/off.
     Caller ID Alert : Hear caller ID for incoming 
    calls.
     Multipoint : Connect your headset to two 
    devices. 
    						
    							ENAdvanced15
    : Use HD Audio Plus for increased 
    clarity and richer sound.
     Voice Answer : Speak to answer incoming 
    calls. 
    						
    							16Want more? EN
    Want more?we’re here to help
    Troubleshooting
    A few frequently asked questions—with 
    answers, of course. Find more at 
    www.motorola.com/support
    .
     My headset will not enter pairing mode Make sure that any devices previously paired 
    with the headset are turned off, then turn the 
    headset off and on (close and reopen 
    earpiece). You’ll hear “ Sliver II is ready to 
    pair ”.
     My phone doesnt find my headset when  searching
    Press and hold the Call button, and turn the 
    headset off and on (close and reopen 
    earpiece). Follow the voice prompts to reset  
    						
    							ENWant more?17
    the headset. You’ll hear “Sliver II is ready to 
    pair”.
     My headset will not pair with my phone
    Press and hold the Call button, and turn the 
    headset off and on (close and reopen 
    earpiece). Follow the voice prompts to reset 
    the headset. You’ll hear “Sliver II is ready to 
    pair ”.
     My headset connected before, but now its  not working
    Make sure your phone is on and the phone’s 
    Bluetooth® feature is turned on. If the 
    Bluetooth feature was turned off or was 
    turned on only temporarily, you may need to 
    restart the Bluetooth feature and pair your 
    phone and headset again. See “ Second 
    device ” on page 12. 
    						
    							18Want more? EN
    Connect with Motorola
      Guides, online help, and more at 
    www.motorola.com/support.
     Support:  Visit www.motoro la.com/support
     or 
    contact the Motorola Customer Support 
    Center at: 1-800-331-6456 (United States), 
    1-888-390-6456 (TTY/TDD United States for 
    hearing impaired), or 1-800-461-4575 
    (Canada).
      If you have questions or need 
    assistance, contact us at 1-877-MOTOBLU, or 
    visit www.motorola.com /bluetoothsupport
     or 
    www.motorola com/bluetoothconnect.
     Accessories:  Find more accessories at 
    www.motorola.com/products
    . 
    						
    							ENWant more?19
     The latest news, tips & tricks, videos 
    and so much more—join us on:
     Yo u Tu b e ™ www.youtube. com/motorola
     Facebook ® www.facebook.c om/motorola
     Tw i t t e r  www.twitter.com/motomobile
     G oogle+ ™ www.google.com/+ 
    						
    All Motorola manuals Comments (0)

    Related Manuals for Motorola Sliver 2 Manual