Motorola Radius Cm200 Cm300 Pm400 Basic 6802966c15 A Manual
Have a look at the manual Motorola Radius Cm200 Cm300 Pm400 Basic 6802966c15 A Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 249 Motorola manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
High Power Radios7-7 2.4 465-495 MHz PM400 Model Chart UHF3, 25-40 W 465-495 MHz Model Description AAM50SPF9AA3ANPM400 465-495 MHz, 25-40 W, 64 CH Item Description X PMUE2092_ PM400 Super Tanapa UHF3, 25-40 W, 64 CH XPMUE2038_PM400 Tanapa UHF3,25- 40 W, 64 CH X FLN3108_AN Control Head XPMUE2038_SPM400 UHF3 Service Board X 6881096C32 PM400 User Guide (bilingual) XHKLN4219PM400 User Guide CDROM (bilingual) x = Indicates one of each is required.
7-8 MODEL CHART AND TEST SPECIFICATION 2.5 Specifications General Specification VHF1 VHF2 UHF2 UHF3 Frequency Range:136-162 MHz146-174 MHz438-470 MHz465-495 MHz Frequency Stability (-30°C to +60°C, 25°C Ref.)±2.5 PPM Channel Capacity:CM300 - 32CM200 - 4 CM300 - 32 PM400 - 64PM400 -64 Channel Spacing: 12.5/25 kHz Power Supply:13.6 Vdc (10.88 Vdc - 16.32 Vdc) negative Vehicle ground Dimensions (L x W x H) 4.65” X 6.67” X 1.73” (118mm X 169.5mm X 44mm) Weight2.25 lbs (1.01 kg) FCC Description ABZ99FT3049 ABZ99FT3046 ABZ99FT4048 ABZ99FT4049 Operating Temperature-30 to 60° C (Display only -20°C to 60°C) Storage Temperature -40 to 85° C Thermal Shock-40 to 80° C High Humidity 95% RH @ 50° C for 8 hrs ESD15KV air discharge Packing Test Impact Test
High Power Radios7-9 Transmitter Specification VHF1 VHF2 UHF2 UHF3 Power Output25-45 W25-40 W Conducted/Radiated Emissions:-26 dBm Audio Response: (from 6 dB/oct. Pre-Emphasis, 300 to 3000Hz) TIA603 and CEPT Tx Audio Distortion < 3% Modulation Limiting:±2.5 kHz @ 12.5 kHz ±4.0 kHz @ 20 kHz ±5.0 kHz @ 25 kHz FM Hum and Noise: -40 [email protected] kHz -45 dB@25 kHz-35 [email protected] kHz -40 dB@25 kHz Receiver Specification VHF1 VHF2 UHF2 UHF3 Sensitivity (12 dB SINAD):0.35 µV @ 12.5 kHz 0.3 µV @ 25 kHz Intermodulation: 65 [email protected] kHz 75 dB@25 kHz60 [email protected] kHz 70 dB@25 kHz Adjacent Channel Selectivity:65 dB @ 12.5 kHz 75 dB @ 25 kHz 60 dB @ 12.5 kHz 70 dB @ 25 kHz Spurious Response 75 dB 70 dB Rated Audio Power4 W (typ.) Internal 7.5 W @ 5 % External Audio Distortion < 5 % Hum and Noise:-40 dB @ 12.5 kHz -45 dB @ 25 kHz-35 dB @ 12.5 kHz -40 dB @ 25 kHz Audio Response TIA603 and CEPT Conducted Spurious Emission per FCC Part 15:-57 dBm 1 Ghz Specifications subject to change without notice. All electrical specifications and methods refer to EIA/TIA 603 standards.
7-10 MODEL CHART AND TEST SPECIFICATION 3.0 MIL Standards MIL STDS 810 C, D, and E: Applicable to UHF and VHF Specifications (8.2 and 8.4) Military Standards 810 C, D, & E: Parameters/Methods/Procedures 810C810D810E Applicable MIL-STDMethods Procedures Methods Procedures Methods Procedures Temperature Shock503.1I503.2I503.3I Solar Radiation 505.1 I 505.2 I 505.3 I Rain 506.1I506.2I506.3I Salt Fog 509.1 I 509.2 I (48 hours) 509.3 I (48 hours) Dust 510.1I510.2I510.3I Vibration 514.3 I, Cat. 1 514.4 I, Cat. 1 Shock516.2I, III516.3I, V516.4I, V Environmental Specifications Operating Temperature-30 to +60 deg C Storage Temperature -40 to +85 deg C Thermal Shock-40 to +80 deg C Humidity 95%RH @ 8 Hr. Water IntrusionIP 54 Packing Test Impact test
GlossaryG-i GLOSSARY Glossary of Terms Te r mDefinition ALC Automatic Level Control: a circuit in the transmit RF path that controls RF power amplifier output, provides leveling over frequency and voltage, and pro- tects against high VSWR (Voltage Standing Wave Ratio). ASF ICAudio Signalling Filter Integrated Circuit with voice compander. CD Compact Disk. CMPCompression. CPS Customer Programming Software. CSQCarrier Squelch. DTMF Dual-Tone Multifrequency. DPLDigital Private-Line™. EEPROM Electronically Erasable/Programmable Read-Only Memory: used by the radio to store its personality. FirmwareSoftware, or a software/hardware combination of computer programs and data, with a fixed logic configuration stored in a read-only memory. Information can- not be altered or reprogrammed. FGU Frequency Generation Unit. GaAsGallium Arsenide: a type of crystalline material used in some semiconductors. ISW Inbound Signalling Word: data transmitted on the control channel from a sub- scriber unit to the central control unit. LCDLiquid Crystal Display: a module used to display the radio’s current operating channel or system and scan status. LDMOS Lateral Diffusion MOS. LH DATALonghorn Data: a bidirectional 0-5V, RS-232 line that uses the microcontroller’s integrated RS-232 asynchronous serial communications interface (SCI) periph- eral. LLE Low Level Expander: slight amount of volume expansion; used to improve the signal to noise ratio. LSHLow-Speed Handshake: 150 baud digital data sent to the radio during trunked operation while receiving audio. MDC Motorola Data Communication. MRTIMotorola Radio-Telephone Interconnect: a system that provides a repeater connection to the Public Switched Telephone Network (PSTN). The MRTI allows the radio to access the telephone network when the proper access code is received.
G-iiGlossary OSW Outbound Signalling Word: data transmitted on the control channel from the central controller to the subscriber unit. PC BoardPrinted Circuit Board PL Private-Line® tone squelch: a continuous sub-audible tone that is transmitted along with the carrier. PLLPhase-Locked Loop: a circuit in which an oscillator is kept in phase with a refer- ence, usually after passing through a frequency divider. PTT Push-To-Talk: the switch located on the left side of the radio which, when pressed, causes the radio to transmit. RAMRandom Access Memory: the radio’s RAM is loaded with a copy of the EEPROM data. Registers Short-term data-storage circuits within the microcontroller. RepeaterRemote transmit/receive facility that retransmits received signals to improve communications coverage. RESET Reset line: an input to the microcontroller that restarts execution. RF PARadio Frequency Power Amplifier RIB Radio Interface Box ROMRead Only Memory RSSI Received Signal-Strength Indicator: a dc voltage proportional to the received RF signal strength. RPT/TARepeater/Talk-Around Softpot Software Potentiometer: a computer-adjustable electronic attenuator SoftwareComputer programs, procedures, rules, documentation, and data pertaining to the operation of a system SPI (clock and data lines)Serial Peripheral Interface: how the microcontroller communicates to modules and ICs through the CLOCK and DATA lines. SquelchMuting of audio circuits when received signal levels fall below a pre-determined value Standby Mode An operating mode whereby the radio is muted but still continues to receive data System Central Con- trollerMain control unit of the trunked dispatch system; handles ISW and OSW mes- sages to and from subscriber units (see ISW and OSW). System Select The act of selecting the desired operating system with the system-select switch (also, the name given to this switch). TOTTime-Out Timer: a timer that limits the length of a transmission. TPL Tone Private-Line µCMicrocontroller
GlossaryG-iii UHF Ultra High Frequency µPMicroprocessor VCO Voltage-Controlled Oscillator: an oscillator whereby the frequency of oscillation can be varied by changing a control voltage. VCOBICVoltage-Controlled Oscillator Buffer Integrated Circuit VHF Very High Frequency VSWRVoltage Standing Wave Ratio
Radius CM200 ™ / CM300 ™ & Motorola PM400 ™ Commercial SeriesMobile Radio Basic Service Manual MOTOROLA, the Stylized M Logo, and Radius are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. © 2004 Motorola, Inc. All rights reserved. Printed in U.S.A.*6802966C15*6802966C15-A