Motorola Radius Cm200 Cm300 Pm400 Basic 6802966c15 A Manual
Have a look at the manual Motorola Radius Cm200 Cm300 Pm400 Basic 6802966c15 A Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 249 Motorola manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Accessories6-3 1.4 Control Station 1.5 Public Address 1.6 Cables 1.7 Mounting HPN4002_Desktop Power Supply 1-25 W HPN4001_ Desktop Power Supply 25-60 W HMN3000_Black Desk Microphone RLN5390_ Desktop Tray with Speaker RLN5391_Desktop Tray without Speaker RLN5492 Low Power Control Station Kit (1-25 W) (includes power supply, desktop tray, and desk mic) RLN5493High Power Control Station Kit (25-60 W) (includes power supply, desktop tray, and desk mic) RLN5288_Public Address Kit (includes switch box and cabling) HKN9324_R Speaker Cable for PA (15 ft.) HSN1000_RExternal Speaker, 6 W for public address HKN9327_RIgnition Switch Cable HKN4137_ Low Power Cable to Battery (1-25 W) HKN4191_High Power Cable to Battery (25-60 W) GLN7324_Low Profile Mounting Bracket GLN7317_ High Profile Mounting Bracket FTN6083_DIN Mount HLN8097_ Removable Slide Mount with Mini_U connector HLN9227_8 in. Gooseneck Trunnion RLN4779_ Keylock Mounting Bracket
6-4 ACCESSORIES & CONNECTOR PIN FUNCTIONS 1.8 Data - CES Wireless Technologies 1.9 Peripherals RDN7364_Base Modem RDN7367_ Mobile Display Terminal with GPS RDN7368_Mobile Display Terminal RDN7369_ Stand Alone Modem with GPS RDN7370_Interface Cable, 3 ft RDN7376_ Interface Cable, 15 ft RDN7372_Fixed Mount GPS Active Antenna RDN7373_ Mobile Printer RDN7374_Programming Software for CES Equipment RDN7380_ Mobile Programming Hardware RDN7375_Magnetic Mount GPS Antenna RDN7377_ MAPS (US) Regional RDN7378_AVL Messaging Statue Software RDN7371_ Credit Card Reader RDN7738_Serial Breakout Unit (multiple modems) RDN7739_ Flying Lead Cable, 3 ft. RDN7740_Flying Lead Cable, 15 ft. HLN3948Basic RICK (Repeater Interface Comm Kit) HLN3333 RICK (Repeater Interface Comm Kit)
Accessory Connector Pin Function6-5 2.0 Accessory Connector Pin Function Pin Function Description 1External Speaker (-)Connect external 8 or 4 ohms speaker to pin 1 and 16. Caution: Bridge-type output. Neither pin 1 or 16 is grounded. 2 External Mic Audio Input impedence:500 ohms 80 mV rms at 1 kHz for 60% deviation. This path is enabled when external mic PTT is keyed. 3External Mic PTTPut this pin low (less than 0.66 Vdc) to key transmitter and enable external mic audio path. This path is pulled low via a diode when front panel mic PTT is pulled low to allow sensing of mic PTT by accessory. This pin pulled high to 3.3 Vdc via 3.3k ohms 4 Programmable OutputDefaults to External Alarm. Provides an active high to 13.8 Vdc battery supply, maximum current: 0.15 amps. CAUTION: Do not short to ground, this may damage the radio. 5Flat_TX_Audio InputInput impedance: Greater than 35k ohms. The nominal input level is 150 mV rms for 60% deviation. 6 SCI Serial Communication Interface. This pin can be configured as a general purpose input by removing resistor R421. 7GroundUsed as ground. 8 Programmable I/O Input or output depending on dealer programming. 9Emergency InputWhen connecting the Emergency Footswitch between pin 9 and 7, the radio will sense the connection upon Power-up. Shorting this pin to Ground by pressing the switch when the radio is OFF, turns ON the radio in Emergency Mode. Shorting this pin to Ground by pressing the switch when the radio is ON, activates Emergency Mode. To turn OFF a radio that was turned ON by Emergency Footswitch (ON/ OFF knob in OFF position) turn knob to ON and then to OFF position. 10 Ignition Sense For optional 3-wire ignition control, connect this pin to the vehicle ignition-controlled voltage source for ignition-controlled radio ON/OFF. To resume NON ignition state, remove the battery connection for 10 seconds; remove the ignition connection from this pin and re-connect the battery connections. 11Receive Audio OutputProgrammable (using CPS in the RX Audio Type): 660mV rms (de- emphasized/muted) or 330mV rms (non de-emphasized muted. Minimum load resistance: 5k ohms 12 Programmable I/O Input or Output 13Switched B+(Switched Battery Voltage) 13.8Vdc (500mA max.) when radio is ON 14 Programmable I/O Input or Output 15Internal SpeakerConnect to internal speaker (+) and by internal jumper to pin 16 16 External Speaker (+) Connect external 8 or 4 ohms speaker to pins 1 and 16. CAUTION: Bridge type output. Neither pin 1 nor 16 is grounded.
6-6 ACCESSORIES & CONNECTOR PIN FUNCTIONS THIS PAGE INTENTIONALLY LEFT BLANK 3.0 Microphone Connector Pin Function Pin Function Description 19.3VRegulated 9.3V Supply (50mA max.) 2Boot/DTMF Keypad ColumnThis pin function depends on the voltage applied to pin 3 (See pin 3, Hook description). When configured as “Boot”, applying 5V to this pin will set the radio to Boot state. When configured as “DTMF Keypad Column”, this pin will carry column voltages generated by the DTMF microphone (RMN5029). 3HookWhen 0V is applied to this pin (mic on hook), pins 2 and 7 will be configured to “Column” and “Row”. When no voltage is applied to this pin (mic off hook), this pin will read 2.7V, and pins 2 and 7 will be configured to “Column” and “Row”. When 9.3V is applied to this pin (programming cables or Mag One mic RMN5018), pins 2 and 7 will be configured to “Boot” and “SCI”. 4 Ground Used as ground 5Mic. AudioAudio input impedance: 500 ohms 80 mV rms input (standard mic) or 1.8 mV rms (low cost mic) at 1 kHz for 60% deviation. This path is enabled when Mic. PTT (pin 6) is keyed 6 Mic. PTT Microphone PTT is active low, so this port reads “0” when PTT is pressed and “1” when PTT is released. 10 K ohms internal pull up resistor to 9.3 V. Pulling low this pin will also pull low, via a diode, pin 3 (external MIC PTT) of the accessory connector. 7SCI/DTMF Keypad RowThe function of this pin depends on the voltage applied to pin 3 (see pin 3 description). When configured as “SCI”, serial communication with the radio is facilitated. When configured as “DTMF Keypad Row” this pin will carry new voltages generated by the DTMF mic (RMN5029) 8 Handset Rx AudioHandset audio output provides de-emphasized, muted Rx audio. The source impedance is 10 ohms and the output level (open circuit) is controlled by the volume control setting.
Chapter 7 MODEL CHART AND TEST SPECIFICATION 1.0 Low Power Radios 1.1 146-174 MHz CM200/CM300/PM400 Model Chart VHF2, 1-25 W, 146-174 MHz Model Description AAM50KNC9AA1ANCM200 146-174 MHz, 1-25 W, 4 CH AAM50KNF9AA1AN CM300 146-174 MHz, 1-25 W, 32 CH AAM50KNF9AA3ANPM400 146-174 MHz, 1-25 W, 64 CH Item Description X PMUD1871_ CM200 Super Tanapa VHF2, 1-25 W, 4 CH XPMUD1873_CM300 Super Tanapa VHF2, 1-25 W, 32 CH X PMUD1904_ PM400 Super Tanapa VHF2, 1-25 W, 64 CH XFLD1933_CM200 Tenapa VHF2, 1-25 W 4 CH X PMUD1882_ CM300 Tanapa VHF2, 1-25 W, 32 CH XPMUD1882_PM400 Tanapa VHF2, 1-25 W, 64 CH X PMLN4598_ Control Head XPMLN4599_Control Head X FLN3108_AN Control Head XFLD1933_SCM200 VHF2 Service Board X PMUD1882_S CM300 VHF2 Service Board XPMUD1882_SPM400 VHF2 Service Board X 6902966C30 CM200 User Guide (bilingual) X6881096C22CM300 User Guide (bilingual) X 6881096C32 PM400 User Guide (bilingual) XXHKLN4220CM200/CM300 User Guide CDROM (bilingual) X HKLN4219 PM400 User Guide CDROM (blilingual) x = Indicates one of each is required.
7-2 MODEL CHART AND TEST SPECIFICATION 1.2 438-370 MHz CM200/CM300/PM400 Model Chart UHF2, 1-25 W, 438-470 MHz Model Description AAM50RNC9AA1ACM200 438-470 MHz, 1-25 W, 4 CH AAM50RNF9AA1AN CM300 438-470 MHz, 1-25 W, 32 CH AAN50RNF9AA3ANPM400 438-470 MHz, 1-25 W, 64 CH Item Description X PMUE1996_ CM200 Super Tanapa UHF2, 1-25 W, 4 CH XPMUE1998_CM300 Super Tanapa UHF2, 1-25 W, 32 CH X PMUE2090_ PM400 Super Tanapa UHF2, 1-25 W, 64 CH XFLE1620_CM200 Tanapa UHF2, 1-25 W, 4 CH X PMUE2026_ CM300 Tanapa UHF2, 1-25 W, 32 CH XPMUE2026_PM400 Tanapa UHF2, 1-25 W, 64 CH X PMLN4598_ Control Head XPMLN4599_Control Head X FLN3108_AN Control Head XFLE1620_SCM200 UHF2 Service Board X PMUE2026_S CM300 UHF2 Service Board XPMUE2026_SPM400 UHF2 Service Board X 6902966C30 CM200 User Guide (bilingual) X6881096C22CM300 User Guide (bilingual) X 6881096C32 PM400 User Guide (bilingual) XXHKLN4220CM200/CM300 User Guide CDROM (bilingual) X HKLN4219 PM400 User Guide CDROM (blilingual) x = Indicates one of each is required.
Low Power Radios7-3 1.3 Specifications General Specification VHF2 UHF2 Frequency Range:146-174 MHz438-470 MHz Frequency Stability (-30°C to +60°C, 25°C Ref.)±2.5 PPM Channel Capacity:CM200 - 4 CM300 - 32 PM400 - 64 Channel Spacing: 12.5/20/25 kHz Power Supply:13.8 Vdc (11 Vdc - 16.6 Vdc) negative Vehicle ground Dimensions (L x W x H) 4.65” X 6.67” X 1.73” (118mm X 169.5mm X 44mm) Weight2.25 lbs (1.01 kg) FCC Description AZ492FT3805 AZ492FT4856 Operating Temperature-30 to 60° C (Display only -20°C to 60°C) Storage Temperature -40 to 85° C Thermal Shock-40 to 80° C High Humidity 95% RH @ 50° C for 8 hrs ESD15KV air discharge Packing Test Impact Test
7-4 MODEL CHART AND TEST SPECIFICATION Transmitter Specification VHF2 UHF2 Power Output1-25W Conducted/Radiated Emissions:-36 dBm < 1 GHz -30 dBm > 1 GHz Audio Response: (from 6 dB/oct. Pre-Emphasis, 300 to 3000Hz) TIA603 and CEPT Tx Audio Distortion < 3% Modulation Limiting:±2.5 kHz @ 12.5 kHz ±4.0 kHz @ 20 kHz ±5.0 kHz @ 25 kHz FM Hum and Noise: -40 [email protected] kHz -45 dB@25 kHz-35 [email protected] kHz -40 dB@25 kHz Receiver Specification VHF2 UHF2 Sensitivity (12 dB SINAD):0.35 µV @ 12.5 kHz 0.3 µV @ 25 kHz Intermodulation: 65 [email protected] kHz 75 dB@25 kHz60 [email protected] kHz 70 dB@25 kHz Adjacent Channel Selectivity:65 dB @ 12.5 kHz 75 dB @ 25 kHz 60 dB @ 12.5 kHz 70 dB @ 25 kHz Spurious Response 75 dB 70 dB Rated Audio Power4 W (typ.) Internal 7.5 W @ 5 % External Audio Distortion < 5 % Hum and Noise:-40 dB @ 12.5 kHz -45 dB @ 25 kHz-35 dB @ 12.5 kHz -40 dB @ 25 kHz Audio Response TIA603 and CEPT Conducted Spurious Emission per FCC Part 15:-57 dBm 1 Ghz Specifications subject to change without notice. All electrical specifications and methods refer to EIA/TIA 603 standards.
High Power Radios7-5 2.0 High Power Radios 2.1 136-162 MHz CM300 Model Chart 2.2 146-174 MHz CM200/CM300/PM400 Model Chart VHF1, 25-45 W, 136-162 MHz Model Description AAM50JQF9AA1ANCM300 136-162 MHz, 25-45 W, 32 CH Item Description X PMUD1946_ CM300 Super Tanapa VHF1, 25-45 W, 32 CH XPMUD1962_CM300 Tanapa VHF1, 25-45 W, 32 CH X PMLN4599_ Control Head XPMUD1962_SCM300 VHF1 Service Board X 6881096C22 CM300 User Guide (bilingual) XHKLN4220CM300 User Guide CMROM (bilingual) x = Indicates one of each is required. VHF2, 25-45 W, 146-174 MHz Model Description AAM50KQC9AA1ANCM200 146-174 MHz, 25-45 W, 4 CH AAM50KQF9AA1AN CM300 146-174 MHz, 25-45 W, 32 CH AAM50KQF9AA3ANPM400 146-174 MHz, 25-45 W, 64 CH Item Description X PMUD1875_ CM200 Super Tanapa VHF2, 25-45 W, 4 CH XPMUD1877_CM300 Super Tanapa VHF2, 25-45 W, 32 CH X PMUD1905_ PM400 Super Tanapa VHF2, 25-45 W, 64 CH XPMUD1884_CM200 Tenapa VHF2, 25-45 W 4 CH X PMUD1886_ CM300 Tanapa VHF2, 25-45 W, 32 CH XPMUD1886_PM400 Tanapa VHF2, 25-45 W, 64 CH X PMLN4598_ Control Head XPMLN4599_Control Head X FLN3108_AN Control Head XPMUD1884_SCM200 VHF2 Service Board X PMUD1886_S CM300 VHF2 Service Board XPMUD1886_SPM400 VHF2 Service Board X 6902966C30 CM200 User Guide (bilingual) X6881096C22CM300 User Guide (bilingual) X 6881096C32 PM400 User Guide (bilingual) XXHKLN4220CM200/CM300 User Guide CDROM (bilingual) X HKLN4219 PM400 User Guide CDROM (blilingual) x = Indicates one of each is required.
7-6 MODEL CHART AND TEST SPECIFICATION 2.3 438-470 MHz CM200/CM300/PM400 Model Chart UHF2, 25-40 W, 438-470 MHz Model Description AAM50RPC9AA1ACM200 438-470 MHz, 25-40 W, 4 CH AAM50RPF9AA1AN CM300 438-470 MHz, 25-40 W, 32 CH AAM50RPF9AA3ANPM400 438-470 MHz, 25-40 W, 64 CH Item Description X PMUE2007_ CM200 Super Tanapa UHF2, 25-40 W, 4 CH XPMUE2010_CM300 Super Tanapa UHF2, 25-40 W, 32 CH X PMUE2091_ PM400 Super Tanapa UHF2, 25-40 W, 64 CH XPMUE2032_CM200 Tanapa UHF2, 25-40 W, 4 CH X PMUE2034_ CM300 Tanapa UHF2, 25-40 W, 32 CH XPMUE2034_PM400 Tanapa UHF2,25- 40 W, 64 CH X PMLN4598_ Control Head XPMLN4599_Control Head X FLN3108_AN Control Head XPMUE2032_SCM200 UHF2 Service Board X PMUE2034_S CM300 UHF2 Service Board XPMUE2034_SPM400 UHF2 Service Board X 6902966C30 CM200 User Guide (bilingual) X6881096C22CM300 User Guide (bilingual) X 6881096C32 PM400 User Guide (bilingual) XXHKLN4220CM200/CM300 User Guide CDROM (bilingual) X HKLN4219 PM400 User Guide CDROM (blilingual) x = Indicates one of each is required.