Motorola Mtp850 S User Manual

29
English
Radio User Identity (RUI)
Your MTP850 needs to confirm RUI to provide the full service. After 
powering on you are prompt to input your User ID and User PIN. 
To  Log on press  > More... > RUI > Log on
To  Log off press  >More... >RUI >Log off
If the Log on is not successful radio has limited access which is 
specified by the Service Provider. 
Radio with RUI feature disabled provides the full service to the 
user.
MENU
MENU 

30
English
Selecting TMO or DMO Operation
Entering TMO or DMO
Enter TMO or DMO in one of the following ways:
• From the Home display press Optns and select Direct Mode if 
the MTP850 is in TMO.
• From the Home display press Optns and select Trunked Mode if 
the MTP850 is in DMO.
• Press and select More... > Networks > Trunked Mode if 
the MTP850 is in DMO.
• Press and select More... > Networks > Direct Mode if 
the MTP850 is in TMO.
• Press the TMO/DMO one-touch button (if programmed by your 
Service...

31
English
Group Calls
A Group Call is a communication between you and others in a 
group. A group is a pre-defined set of subscribers enabled to 
participate in and/or invoke a Group Call.
Groups are organised in maximum three folders. Each folder may 
contain folders and several groups.
Favorite Folders
You can organise your favorite groups into three folders. 
Selecting the “My Groups” Folders
From the Home display, press to quickly access the folders.
Adding a Group (TMO/DMO)
1.Press and select...

32
English
Renaming Favorite Folder
1.Press and select More... > Group Setup > My Groups.
2.Highlight group folder name and press  .
3.Select Rename Folder.
4.After editing the name of the folder press Ok to confirm.
Deleting Favorite Folder
1.Press and select More... > Group Setup > My Groups.
2.Highlight group folder name and press  .
3.Select Delete Folder.
4.Press Ok to confirm.
Selecting a Group 
Using the Rotary Knob
(If programmed)
From the Home display, press shortly on the Rotary knob and rotate...

33
English
Using Folder Search
From the Home display, press Optns. Select a group by folder 
search (“TG by Folder”). Select the folder and select the group.
Using the Numeric Keypad - Speed 
From the Home display, you can dial a group by entering its speed 
number via the keypad. This feature is called Talkgroup Speed 
Dialing. The speed number is pre-configured in the terminal.
You can view a speed number attributed to a group, if it exists.
Viewing the speed number 
1.From the Home display, press...

34
English
TMO Group Calls
In TMO the MTP850 is used with your Service Provider’s 
infrastructure.
Making a TMO Group Call
1.From the Home display and if this is the required group, press 
and hold the PTT. 
2.Wait for the talk permit tone and then speak into the microphone. 
Release the PTT button to listen.
When you start a call, all members of the selected group who have 
their units turned on, will receive the Group Call.
Receiving a TMO Group Call
Unless it is engaged in a call, your MTP850 will...

35
English
When you start a call, the members of the selected group who have 
their units turned on will receive the Group Call.
In DMO the MTP850 can communicate with the trunking system 
(and vice-versa) if the Gateway option is enabled in the MTP850.
Making a DMO Group Call
1.Enter Direct Mode by pressing Optns and selecting Direct 
Mode.
2.Make sure that you have selected the required group. Press and 
hold the PTT button. 
3.Wait for the talk permit tone and then speak into the microphone. 
Release...

36
English
Private, Phone, and PABX Calls
Creating a Contact
1.From the Home display, press Contcs. Select [New Contact]. 
2.Enter name. Press Ok to confirm.
3.Press  /  and select the type of stored number (such as 
Private). 
4.Enter number (#). Press Ok.
5.Continue to enter other types and numbers, as you may keep 
several numbers (Private, Mobile, Home, Work, PABX, Other) for 
the same person under the same contact name.
6.When finished, press Done. Press Back to return to Home 
display.
How to Dial...

37
English
Speed Dial
Speed dial allows you to dial a shortened number of up to three 
digits instead of the full number. The speed dial number is the 
location of an entry in the contact list.
1.Enter the pre-programmed speed dial number (for example: 5) 
and press .
2.To place the call, press .
To hang up, press .
Private Call
A Private Call, also called Point-to-Point or individual call, is a call 
between two individuals. No other terminal can hear the 
conversation. This call can be:
• a full-duplex...

38
English
Receiving a Private Call
1.The MTP850 switches to the incoming Private Call. The display 
shows the caller’s identity.
2.To answer an incoming half-duplex call, press PTT. To answer an 
incoming full-duplex call (indicated by Spkr or Erpce soft keys), 
press  or green receiver button.
3.To end the call, press  .
Phone and PABX Calls
The Phone Call allows you to call a landline telephone number or a 
cellular mobile phone number. 
The Private Automatic Branch Exchange (PABX) Call allows you 
to...