Motorola Mtp850 S User Manual

19
English
Direct Mode
Displayed when the MTP850 is in Direct Mode.
DMO Gateway
Indicates that gateway is selected. The icon has three states:
Solid – while the MTP850 is synchronised with the gateway. 
Flashing – while the MTP850 is not synchronised or during 
attachment.
No icon – during a terminal to terminal and repeater call.
DMO Repeater
Displayed when the repeater option in DMO is selected. This 
icon has three states:
Solid – while the terminal has detected the repeater (i.e., 
when the terminal...

20
English
Menu Icons
The following icons make it easy to identify the menu items at first 
glance.Earpiece Connected
Indicates that the earpiece is connected.
RUI Pseudo Log On
Indicates that the user is pseudo logged on.
Pseudo Log On with Packet data
Indicates that the user is pseudo logged on and Packet Data 
at the same time.
Battery Strength
Shows the charge in your battery. Full icon is full charge.
Emergency
Appears while the MTP850 is in Emergency Mode.
List Scrolling
Displayed to indicate that...

21
English
Inbox Icons
The following icons indicate the status of messages in the inbox.
Contact Icons
In the contact list display, the following icons may appear next to the 
contact numbers to indicate the type of stored number. More...
Contains more customisable menu items.
Scroll Bar
Indicates navigation among items that occupy more than 
one screen. If all items appear in one screen, the scroll bar 
is empty.
Inbox IconDescription
Unread (New) Message
Indicates that you have not read the message...

22
English
Outbox Icons
In the Outbox submenu those three icons indicate the process of 
sending the Store & Forward messages. For more information 
please contact your Service Provider.
Text Entry Icons
Selecting the Text Entry Mode
Text entry modes make it easy for you to enter names, numbers, 
and messages. 
In the text entry screen, select >Entry Mode, and then 
select one of the following modes: 
•Primary–for entering alphanumeric characters 
•Numeric–for entering numbers only 
•Symbol–for entering...

23
English
Selecting the Text Entry Method and Language
There are two text entry methods:
• TAP–Enter letters, numbers and symbols by pressing an 
Alphanumeric key one or more times.
• iTAP–Let the terminal predict each word as you press an 
Alphanumeric key.
You can use these methods in the languages programmed in the 
terminal.
In the text entry screen, select >Entry Setup, and then 
change to one of the methods and its related language (for 
example: TAP English).
Text Capitalisation
Press .
Icons
In...

24
English
List of Keys and Characters in Alphanumeric Mode (TAP/iTAP) 
List of Keys and Characters in Numeric Mode 
KeyAlphanumeric Mode (TAP/iTAP)
Press to cycle through single shift, caps lock, and 
lower case.
. , ? ! 0 1 @ 
’ ” - ( ) / : _ ; + & % × * = < > € £ $ ¥ ¤ [ 
] { }  ~ ^ ¿ ¡ § #
A B C 2
a b c 2
D E F 3
d e f 3
G H I 4
g h i 4
J K L 5
j k l 5
M N O 6
m n o 6
P Q R S 7
p q r s 7
T U V 8
t u v 8
W X Y Z 9
w x y z 9
KeyNumeric Mode
• Press to enter digit at insertion point.
• Press and hold...

25
English
Getting Started
Battery
Installing the Battery
1.Remove the battery from its protective clear plastic case.
2.Insert the battery top into the compartment as illustrated.
3.Carefully press the battery bottom downward until it clicks into 
place. 
Replacing the Battery
To remove the battery: 
1.Push the latch on the bottom. 
2.Lift the bottom of the battery out. 
3.Replace the battery. 

26
English
Charging the Battery
Motorola approved chargers provide optimum performance. Other 
chargers may not fully charge your Motorola Lithium-Ion battery or 
may reduce the life of the battery. 
The MTP850 can be either On or Off during charging.
1.Insert the connector on the charger into the socket at the base of 
the MTP850. Select the required plug adapter (UK or European 
type) and connect to the charger. Then plug the charger into a 
suitable mains socket.
2.The MTP850 displays the Charger...

27
English
Powering On/Off (On–Off/End/Home Key)
To power On, press and hold . Your MTP850 performs a self-
check and registration routine. After successful registration, the 
MTP850 is in service.
To power Off, press and hold . You will hear a beep and the 
Powering Off message is displayed.
Powering On (Emergency Button)
Press and hold the Emergency button to power On. The MTP850 
will power On in Emergency Mode or in standard mode (as 
programmed).
Powering On with Transmit Inhibit (TXI) Active...

28
EnglishPress the Ye s soft key to deactivate the TXI Mode. If the MTP850 
was previously used in Trunked Mode, it will register to the network. 
If the MTP850 was previously used in Direct Mode, it will remain in 
Direct Mode.
Press No in Trunked Mode and the MTP850 powers down; press 
No in Direct Mode and you remain in Direct Mode with TXI selected.
Unlocking the MTP850
Your MTP850 may be locked at power up. 
To unlock the MTP850 after powering on, enter the code at the 
prompt. The MTP850 enters...