Motorola It6 User Guide

41Using the answering machine
KeyOperation
1 To repeat the current message or skip 
back during message playback
2 To play messages
3 To skip forward during messages
6 To delete during messages
7 To switch Answering machine on (not 
available in message playback)
8 To stop message playback
9 To switch Answering machine off (not 
available in message playback)
NOTES
If you have any new messages they will be played after you have entered your remote 
access PIN code.
If you enter an incorrect PIN code you...

42Do Not Disturb
8. Do Not Disturb
Your IT.6T can be set to Do Not Disturb (DND) mode for a designated time period. Once 
activated when you receive an incoming call the phone will not ring, unless a contact has 
been set as an exception, (see page 33) or the 
Allow setting has been set to On.
8.1    Set DND mode
1. Press Menu, scroll to Do Not Disturb and press OK.
2. 
On/Off is highlighted, press OK.
3.  Scroll to 
On or Off and press OK.
4.  Scroll to 
Start/End Time and press OK.
5.  Using the keypad...

43Call block
9. Call block
You can set the IT.6T so that when certain phone numbers call the phone does not ring. 
Contacts can be blocked through the phonebook menu, (see page 33) or though the Call 
block menu. You can store up to 49 numbers in the Call block list.
For this feature to work, you must subscribe to Caller ID Service from your network 
operator. A subscription fee may be payable.
IMPORTANT
If the Base Ringer is set to ON in the settings menu, the base station will continue to ring 
even if...

44Call Bar
10. Call Bar
You can set the IT.6T so that it will block outgoing calls to numbers that start with certain 
digits.
Up to 4 numbers can be set in the Call Bar list and each number can be up to 4 digits long. 
When a call starting with one of the numbers in the list is dialled out, the outgoing call will 
be blocked.
IMPORTANT 
Using “0” or “00” to bar access to international, mobile or STD calls will prevent “000” 
emergency calls being made from this handset and any other handset registered...

45Room monitor
11. Room Monitor
You can use your IT.6T handset to monitor the sounds in another room. If the sounds reach 
a certain level the handset will automatically dial out to a pre-set external number or to 
another handset. When the Room Monitor is set to On, the handset will display Room 
Monitor On and only the microphone will be active to monitor the sound levels in the 
room. Both the speaker and receiver will be set to Off and the handset will not ring if there 
is an incoming call.
11.1...

46Room monitor
2. The phonebook is displayed, either scroll to the entry you want to use or search 
alphabetically and press OK.
3.  Scroll to the number you want to set and press 
OK.
4.  Press 
e to return to standby.
NOTE
When Room Monitor is switched on and the sound level reaches a certain level the 
receiver unit will be automatically dialled.
If the Room Monitor is triggered to call a handset or number and the called handset is on a 
call, an alert tone of 2 beeps will be heard.
11.3    Change the...

47Alarm
12. Alarm
The IT.6T has a built in alarm facility.
12.1   Create an alarm
1. Press Menu, scroll to Alarm and press OK.
2. 
Create alarm is highlighted, press OK.
3.  Using the keypad enter the name and press 
OK.
4.  Press 
Save and press e to return to standby.
12.2    Switch alarm on / off
1. Press Menu, scroll to Alarm and press OK.
2.  Scroll to the alarm you want to edit and press 
OK.
3. 
On/Off is highlighted, press OK.
4.  Scroll to 
On or Off and press OK.
5.  Press 
Save and press e to...

48Alarm
When the alarm rings:
Press 
Off to turn the alarm off.
Press 
Snooze for the alarm to repeat after 5 minutes. After pressing Snooze 3 times the 
alarm will automatically turn off.
12.5    Set the alarm ring
1. Press Menu, scroll to Alarm and press OK.
2.  Scroll to the alarm you want to edit and press 
OK.
3.  Scroll to 
Alarm Ring and press OK.
4.  Scroll to the ringtone you want and press 
OK.
5.  Press 
Save and press e to return to standby.
12.6    Edit alarm name
1. Press Menu, scroll to...

49Sounds
13. Sounds
13.1   Ringer volumeThe handset has 7 ringer volume settings, volume 1 -5, Progressive or Off.
If the volume is set to Off, 
 is displayed.
1.  Press 
Menu, scroll to Sounds and press OK.
2. 
Ringer Volume is highlighted. Press OK.
3.  Scroll to adjust the ringer volume level and press 
OK.
4.  Press 
e to return to standby.
NOTE
When the phone is ringing, you may press 
Silence to silent the ringer for that call.
13.2   RingtoneSelect from 10 handset ringtones.
You will hear a sample...

50Sounds
3. Scroll to Off or On then press OK.
4.  Press 
e to return to standby.
13.5    Base beepWhen you replace the IT.6T handset on the base, you will hear a beep. You can switch it 
on or off.
1. Press 
Menu, scroll to Sounds and press OK.
2.  Scroll to 
Base Beep and press OK.
3.  Scroll to 
Off or On then press OK.
4.  Press 
e to return to standby.
13.6    Turn base ringer on / off
1. Press Menu, scroll to Sounds and press OK.
2.  Scroll to 
Base Ringer and press OK.
3.  Scroll to 
Off or On...