Mitsubishi Xl5980lu Lcd Projector User Manual

							EN – 21
ENGLISH
Mouse remote control
By connecting to personal computer through the USB or SERIAL port, you can operate your computer with the
projector remote control.
Projector + computer with USB connector
Operation
•Turn off computer and the projector before connecting with SERIAL port. When connecting the computer with
the projector when the personal computer is on, the remote control does not work as a mouse. In that case,
restart the personal computer.
•When the projector is connected with USB terminal and RS-232C terminal at the same time, only the termi-
nal which the projector recognizes first will work.
•When you use the RS-232C cable together with an extension cable, the function may not work correctly. •You can use the mouse remote control function with a computer supporting USB only.
•When the lamp is turned ON, the computer connected with the USB cable may not work correctly. In this
case, restart the projector and the computer. If possible, you should disconnect the USB cable when the lamp
is turned ON.
Projector + computer with SERIAL port
COMPUTER
VIDEO KEYSTONE
VOLUME
LASER
EXPAND
MENU R-CLICK ENTER
P in PSTILL
MUTE
LENS SHIFT16 : 9
12
12
ZOOM/FOCUS AUTOPOSITION
R-CLICKThis operates in the same way as the right 
button on the computer mouse. 
mouse pointerUse to move the cursor on the image, 
instead of the computer mouse.
left clickThis operates in the same 
way as the left button on 
the computer mouse. 
to USB
USB cable
(option)to USB port
USB 4P
 (type B)USB 4P
 (type A)
REMOTE
INREMOTE
OUTINPUT 1
INPUT 2R/PRB/PBG/Y H/HVV
AUDIO
IN
AUDIO
OUTY
CRS-232C RS-232C/MOUSEUSB
S-VIDEO
VIDEO
2
VIDEO
1
L
AUDIO
R MAIN
AC IN
REMOTE
INREMOTE
OUTINPUT 1
INPUT 2R/PRB/PBG/Y H/HVV
AUDIO
IN
AUDIO
OUTY
CRS-232C RS-232C/MOUSEUSB
S-VIDEO
VIDEO
2
VIDEO
1
L
AUDIO
R MAIN
AC IN
to RS-232C/MOUSE
terminal
to SERIAL port
8P
D-SUB 9P
RS-232C cable 
						

							EN – 22
The lamp is designed to project the image on the
LCD panels. When the lamp no longer functions,
replace it with a new one.
Caution:
•Do not remove the lamp immediately after using
the projector, you may get burned because of the
high temperature of the lamp.
•When you replace the lamp, press the power
button to power off, then wait for 120 seconds in
stand-by mode to allow the lamp and LCD panels
to cool. Turn off  the main switch,  unplug the
power cord from the outlet, and wait one hour so
that the lamp is cooled to the touch.
•Do not remove the lamp except for replacement.
Careless treatment can cause injury or fire.
•Do not touch the lamp element directly. It may
break and cause you to injure or burn yourself.
•Be sure not to drop the lamp lid screw into the
projector. Also be sure not to insert metal or any
flammable objects, it may cause fire or electric
shock. If any objects are inserted, please unplug
and contact your dealer.
•Install the lamp securely, failure may cause a fire.
•If the light bulb part breaks, some small glass
fragments may fall out through the small cooling
grill, and sticks to the inside of projector or the
lamp box. When taking the lamp out, make sure
to turn over the projector and hold the handle of
the lamp box to avoid injury from the glass frag-
ments.
•Never shake the lamp or hold it in front of your face
after removing the lamp box.
The glass fragments may fall
out and cause injuries to your
eyes and so on.
1. Reverse the projector gently.
2. Loosen the screws of the
lamp lid (a) using a Phillips
screwdriver (+), and remove
the lid.
•Remove the lamp cover in
the direction of the arrow as
indicated.
3. Loosen screws (b) using a
Phillips screwdriver (+), and
remove them.
4. Pull up the handle.
5. Hold onto the projector by
the handle as you pull out
the lamp.
•Pull the lamp out of the
projector slowly. Should
the light bulb be broken,
glass fragments will spill
out if the lamp is pulled
out too quickly.
•Once the lamp has
been removed, do not
spill liquid on it, place
it near flammable
objects or where
children can touch it.
Otherwise, it will cause
injury or fire.
6. Insert the new lamp
securely into the projector
body in the right direction.
7. Put the handle back to the
holding point.
•Make sure that the
handle is locked.8. Tighten up the screws
(b) using a Phillips
screwdriver (+).
9. Tighten up the screws
of the lamp lid using a
Phillips screwdriver
(+).
How to reset the operation time meter
Plug in the power cord, switch on the projector, and
reset lamp time by pressing the $, % and POWER
buttons on the contro panel simultaneously.
Important:
•If the 3 buttons was not pressed at the same time,
the lamp time may not be reset.
•Please confirm the TEMP indicator illuminates
about 2 seconds and the lamp time has been
reset.
•The projector will not turn on if you do not secure
the lamp lid.
•You must reset the operation time meter after you
replace the lamp.
•Do not reset the operation time meter unless the
lamp has been replaced.
Caution:
•Do not spill liquid on the lamp or place it near
flammable objects or where children can touch it.
Otherwise, it could cause injury or fire.
•Be sure that the projector guide is firmly inserted
between the right and left lamp guides.
Interval of the lamp replacement
The interval of the lamp replacement about 1500 hours of
consecutive use. Replacement span may differ according
to operating environment, and may be shorter than 1500
hours. Decreases in luminescence and/or color brightness
will indicate that the light source lamp needs to be re-
placed. When lamp operation time exceeds 1000 hours*
1,
the indicator will flash alternately between green and red
(while the lamp is in operation; when the lamp is not in
operation, the indicator will appear red only) and the
lamp replacement message will appear on the screen for
one minute everytime the power is turned on. When the
lamp has been used for about 1400 hours*
1, the replace-
ment message (LAMP:>1400H) will appear on the screen
for one minute everytime 10 hours after. When the lamp
has been used for about 1500 hours*
1,*2, the projector will
automatically shut off for safety and the power indicator
light will be red. The projector cannot be used until the
lamp has been replaced and operation timer has been
reset.
The projector automatically shuts off when the
lamp is used up in about 1500 hours*
1,*2 and cannot
be used until the lamp is replaced and the internal
timer is reset.
*
1)When LAMP MODE of the INSTALLATION menu
is set to STANDARD.
*
2)When LAMP MODE is set to LOW, the duration
will be extended maximum up to 2000 hours.
Caution:
•The lamp is fragile. If broken, be careful not to cut
yourself with glass fragments.
•The replacement span of the lamp depends on the
environment. For replacement lamps, please contact
your dealer.
•This projector uses a lamp that contains mercury.
Disposal of the lamp or the projector with the
lamp may be regulated due to environmental
considerations. For disposal or recycling informa-
tion, please contact your local authorities or the
Electronic Industries Alliance: www.eiae.org. (For
US only).
(a)
Lamp replacement
(b)
(b) 
						

							EN – 23
ENGLISH
Maintenance
Caution:
Be sure to turn off the projector and unplug the
power cord from the wall outlet before you perform
any maintenance on the projector.
Cleaning the air-filter
Clean the air-filter frequently (about once a month).
If the filter or ventilation slots become clogged with
dirt or dust, the temperature inside of the projector
may rise and cause some troubles, such as damage of
inside parts, and shortening the life of panel.
•When the temperature inside of the projector
rises, the TEMP indicator blinks in red, and the
power will be shut off to be stand-by which LAMP
indicator is turned off.
1.To remove the filter
cover, slide the cover
in the direction of the
arrow.
2. Remove the air-
filter from the filter
cover.
3. Wash the air-filter or
change to the new filter.
•Use water or a mild
detergent diluted with
water to clean the filter.
Rinse the filter thor-
oughly and let it dry
completely.
4. Attach the air-filter to the filter cover.
5. Attach the filter cover to the projector.
•Make sure that the air-filter is attached cor-
rectly without displacement.
Important:
•If the filter is damaged or becomes extremely
dirty, change to the provided new filter. If you
wish to another new filter, contact your dealer for
replacement.
•The power will not turn on if the air-filter cover is
improperly installed.
Caution:
Be sure to use the projector with an air-filter. If not,
dust may get inside the projector, causing a fire or a
breakdown.
Cleaning the projector and the
ventilation slots
Use a soft cloth to clean the projector and the ventila-
tion slots. When the slots become dirty, wipe them
with a soft cloth dampened with a diluted mild
detergent, and then wipe them with a dry cloth.
•Clean the inside of the terminal cover frequently
as dust is apt to be collected.
To protect the surface of the projector from fading or
deteriorating:
•Do not spray insecticide on or inside the
projector.
•Do not use benzine or thinner to clean it.
•Do not let rubber or plastic materials come into
contact with the projector.
Cleaning  the lens
Use a standard lens-cleaning brush or a piece of lens
tissue dampened with lens cleaning fluid. The lens
surface is fragile. Use only recommended, nonabra-
sive lens-cleaning materials. Do not touch the lens
with your fingers.
Filter Filter cover 
						

							EN – 24
About the terminal cover (with Anti-Theft Alarm device)
This projector includes a terminal cover with Anti-
Theft Alarm device. Once the terminal cover is
installed, its Anti-Theft Alarm device will detect
vibration caused by the projector being moved and
emit an alarm.
•Mitsubishi assumes no responsibility or liability
for theft or other damages.
Procedure for setting the Anti-Theft
Alarm device
Insert dry cell batteries into the theft warning
device
1. Open the battery cover of the theft warning
device.
2. Check the (+) and (-) ends of the battery, and
insert it from the (-) end first.
•Inserting the battery from the (+) end makes it
difficult to fit the (-) end into the coil spring.
Forcing in the battery in such a position may
shred the outside label, causing a short circuit
and overheating.
•Please refer to page 8 for information on how to
handle dry cell batteries.
3. Close the battery cover.
4. Insert the included safety pin into the safety pin
hole.
•If the safety pin is not inserted, the vibrations
and shocks of normal use may cause the alarm to
sound.
5. Turn the power switch ON.
Install the terminal cover
1. Insert the four tabs on the terminal cover into the
holes on the projector’s side.
2. Slide the terminal cover toward the back of the
projector.3. Tighten the three screws that keep the terminal
cover in place.
4. Install the projector in a specified location.
5. Press the battery level check button until you
hear a buzzer sound.
6. Remove the safety pin.
The 
Anti-Theft Alarm device is now in standby.
•This package includes a sticker which shows that
the Anti-Theft Alarm device is active. Visible
placement of this sticker is recommended.
•To temporarily halt the Anti-Theft Alarm device,
insert the safety pin.
•Vibrations will not cause the alarm to sound for
several seconds after the power switch is turned
ON.
•Vibrations will not cause the alarm to sound for
several seconds after the safety pin is removed.
•Vibrations and shocks from earthquakes may
cause the alarm to sound. In such situations,
insert the safety pin to halt the alarm.
•Batteries may come loose during transportation.
Please remove them beforehand.
Procedure for changing batteries
How to check battery level
Use a pointed object to push the battery level check
button.
•A buzzer will sound while the button is being
pushed. If there is no buzzer sound, then batteries
need to be changed.
•Sounding the buzzer for a long time will consume
battery power.
Change the dry cell batteries
1. Insert the safety pin into the safety pin hole.
2. Loosen the three screws that keep the terminal
cover in place.
3. Slide the terminal cover toward the front of the
projector.
4. Pull the terminal cover toward you and remove it.
•Attention must be paid when removing the
terminal cover as there could be foreign objects
inside.
•Removal of dust found inside the terminal cover is
recommended when changing batteries.
5. Open the battery cover and remove the old dry cell
batteries.
6. Check the (+) and (-) ends of the new battery, and
insert it from the (-) end first.
•Use alkaline AA batteries.
•Standard battery life is approx. six months (when
using alkaline dry cell batteries). Please check the
battery level and change batteries regularly.
7. Close the battery cover.
Tabs
Power switch
Battery cover
ON
safety pin hole
safety pin
Screws
battery level check button.  
						

							EN – 25
ENGLISH
Troubleshooting
The following offers solutions to some of the common problems you may encounter. We suggest that you consult
this chart before contacting your dealer.
CAUSEPOSSIBLE SOLUTIONSPROBLEMS
Only the motion area in the
image supplied from the   com-
puter is not displayed.
•The air inlet slots, outlet slots  or air filter is clogged
with dust or some objects.
POWER indicator does not light up.
•Power cord is unplugged from the outlet.
•Power cord is disconnected from the projector.
•The main switch is turned off.
•The lamp lid is open.
POWER indicator blinks red.
•The projector has been turned on again too soon after
having been turned off.
•When the power switch was turned off while the fan
was running, during or after lamp operation.
•The room temperature is too high.
(Does the LAMP indicator show an unusual condition?)
•Lamp is no longer working.
POWER indicator blinks between red and green.
•The filter cover is not closed.
•When the LAMP indicator or the TEMP indicator is
either on or blinking, the main unit requires repairs.
•Lens is covered by lens cap.
•When the LAMP indicator or the TEMP indicator is
either on or blinking, the main unit requires repairs.
•The equipment connected to this projector is not turned on.•Hookup is not made correctly with other equipment.
•The input source is not selected correctly.
•An extension cord is being used instead of the supplied
cable.
•The air inlet slots, outlet slots  or air filter is clogged
with dust or some objects.
(In this case, the TEMP indicator does not light up.)
•The projector is not at a right angle to the screen.
•Brightness, tint and color are not adjusted correctly.
•The projecting distance is beyond the focused area.
•Lens is dirty.
•Screen size exceeds screen size specifications.
•Brightness and contrast are not adjusted correctly.
•FINE adjustment is not made correctly.
•Tracking is not adjusted.
•The projector is not at a right angle to the screen.
•The output resolusion of the computer exceeds the reso-
lution of the projector.
•Keystone adjustment is used.•Remove the object.
•Plug the power cord into the outlet.
•Insert the power cord into the projector.
•Turn the main switch on.
•Close the lamp lid.
•
Wait for the lighting sequence.
•Turn the power switch on and off several times.
•Refer to Indicators on page 26.
•Replace the lamp with a new one.
•Close the cover correctly.
•Contact your dealer.
•Take the lens cap off.
•See page 26.
•Turn on the connected equipment.
•Confirm the hookup.
•Select the correct source according to the equipment
connected to this projector.
•Check whether the image is displayed correctly by
replaceing it with the supplied cable. When the image
is displayed correctly, use the extension cord along with
an RGB signal amplifier.
•Remove the object and turn off the main power switch.
After about 10 minutes, Turn the projector on.
•Adjust the angle of the projector to make a right angle
to the screen. See page 12.
•Adjust brightness, tint and color correctly. See page 18.
•Adjust the projecting distance. See page 9.
•Clean lens.
•Reduce screen size to within 60 to 300.
•Adjust brightness, contrast.
•Make FINE adjustment.
•Adjust tracking. See page 17.
•Adjust the angle of the projector to make a right
angle to the screen. See page 12.
•Adjust the output resolution of the computer to the
resolution of the projector. (See page 29.) For changing
the output resolution of the computer, contact the
computer manufacturer.
•When you use the keystone adjustment, graphics or
characters may be blurred in some images. In this case,
use the projector with using the keystone adjustment
disabled. (See page 12.)
•It is normal.
•The cable for connection with other equipment is not
plugged securely into the terminal.
•The projector is installed too close to other equip-
ment.
•Volume is not turned up.
•Connection to other equipment is not made correctly.
•The PC monitor is not turned on.
•This is typical of the LCD projector.
•The operation is incorrectly made due to noise or interference.
•Plug the connecting cable securely into the terminal.
See pages 10-11.
•Install the projector far away from other equipment.
•Turn up the volume.
•Check connections.  See pages 10-11.
•Turn on the monitor.
•Press the reset button on the Terminal board.  See page 15.
The power is off.
No picture appears
on the screen.
The image is turned
off.
The image is distorted.
The image is blurred.
Red, blue or green dots are
viewed on the text of image.
The afterimage remains.
The image is distorted
on the screen and
noise is heard.•When a stationary image is projected for a long time, its afterimage may persist on the screen. This is not a
failure, and the afterimage will disappear in a few minutes.
•This is caused by a problem of the computer. Contact the computer manufacturer. The image is dark.
No sound is heard.
Adjustments cannot be made.
Warm air comes out of the
exhaust vents. Nothing is displayed
on the PC monitor.
 is displayed.
•This mark is displayed when an invalid operation is executed (for example, when the COMPUTER or VIDEO
button is pressed while the menu is displayed). This is not failure. 
						

							EN – 26
Indicators
The projector has three indicators each of which shows the working condition of the projector.
The following offers solutions to possible problems. If a problem persists, turn the projector off and consult your
dealer.
TEMP indicator
LAMP indicator
POWER indicator
LAMP TEMPPOWER
Normal condition
Abnormal condition
Steady 
red
Steady 
green
Steady 
greenBlinking
green
Steady 
green
POWER LAMP TEMPCONDITION Notes
The POWER is ON. (Normal condition) Lamp stand-by (about for 1 minute) The power button cannot be used to switch
OFF. Stand-by
Off Off
Off
Off
Steady 
greenBlinking
green/red
Blinking
green/red
Blinking
green/red
Steady 
red
Steady 
greenSteady 
greenBlinking
red
Blinking
red
POWER LAMP TEMPCONDITION POSSIBLE SOLUTIONS
Lamp duration warning. (Lightning duration total 
about 1000 hours*.When the POWER is ON.)
Steady 
redBlinking
redLamp duration warning. (Lightning duration total 
about 1000 hours*.When the POWER is OFF.)
Steady 
redLamp duration warning. (Lightning duration total 
about 1500 hours*.)
The lamp or filter cover is not closed.  The protection circuit is working or the lamp is in an
abnormal condition.
(The indicators operate as shown on the left at the time of power-off, too. 
In this case, they are’nt indicating an abnormal condition.)
Close the cover correctly.
or or
BlinkingBlinking
Abnormal. Contact your dealer.
Off
Off
Steady 
redBlinking
greenOff
Off
Off
Off
Off
Steady 
red
Steady Steady 
Unusual temperature
•The ventilation slits or air filter is clogged with 
dust or debris.
•The room temperature is too high.
•  The filter is dirty.•Remove the object from the ventilation
slits.
•Relocate the projector to a cooler place.
•   Clean the filter.
Replace the lamp.
Exchange with a new lamp if the same 
problem recurs.
•Wait until the LAMP indicator is turned 
off, then press the POWER button.
•If the above operation is not effective, 
replace the lamp.
*) When LAMP MODE of the INSTALLATION menu is set to STANDARD.When it is set to LOW, the duration will be extended. 
						

							EN – 27
ENGLISH
Specifications
LCD projector
XL5980U|
XL5980LU
AC100 - 240V,  50 / 60Hz
3.8 A
16770000 colors
F 1.8 - 2.1*
1   f = 51 - 64 mm*1
270 W
60 - 300 inch*
1 (aspect ratio 4:3)
Resolution : 640 x 400 (Expand) - 1024 x 768 (Real) - 1600 x 1200 (Compress)
Sync on Green available
NTSC / NTSC 4.43 / PAL (including PAL-M, N) / SECAM, PAL-60
DVD (Component) / HDTV (1080i) / 720p / (525p)
5 W Mono
Round type (4Ω 5W) × 1
Luminance signal: 1.0 Vp-p 75Ω    (negative sync.)
Chroma signal: 0.286 Vp-p 75Ω  (burst signal)
1.0 Vp-p  75Ω   (negative sync.)
150 mVrms,  10kΩ or more
RGB: 0.7Vp-p  75Ω (negative sync.)
YP
BPR(YCBCR): Y:1.0Vp-p (negative sync.) PBPR(CBCR):0.7Vp-p
HD/CS : TTL level (positive or negative)
VD : TTL level (positive or negative)
150 mVrms,  10kΩ or more ø3.5mm stereo mini jack
Serial (8 pin connector) RS-232C standards
USB terminal for Mouse, Wired remote terminal
371 × 176  × 434 mm*
2 (width × height × depth)
443 × 176  × 434 mm*
2 (width × height × depth) (with Terminal cover)
Approx.  8.5kg*
2Approx.  9.0kg*2 (with Terminal cover)
118 inch (3.0m)
+41°F (+5°C) - +104°F (+40°C),  30~90%
Type
Model
Rated power supply
Rated input
LCD panels
Colors
Projection lens
Light source lamp
Picture size
PC compatibility
Video compatibility
Audio output
Speaker
S-video input
Video input
Audio inputs
Analog RGB input
(mini D-SUB 15P/BNC)
PC audio input
Control connector
Outside dimensions
Weight
Length of power cord
Temperature, humidity
(performance guarantee)
Kensington Lock
This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security
System. Refer to the information that came with the Kensington System for instructions on how to use it to
secure the projector. Please contact to Kensington Technology Group as shown below.
Kensington Technology Group
2855 Campus Drive
San Mateo, CA 94403, U.S.A.
Phone : (650)572-2700 Fax : (650)572-9675
Legs and lens are included.
1.3-inch LCD panel: 3 pieces (for R, G, B)
Pixels  1024 × 768 = 786432 pixels
Total   2359296 pixels
Active pixel rate: 99.99 % or more (each panel)
*1) For XL5980U only. For XL5980LU, please refer to page 30.
*
2) For XL5980U only. 
						

							EN – 28
Specifications (continued)
1Sticker for Anti-Theft Alarm 853C588-10
1Filter 620D119-10
1Remote control 939P955-10
4Battery –
1Safety manual / Quick start up 871D389-20
1CD-ROM 919C132-20
Connectors
Dimensional drawings
(mm)
Replacement part
(Option / Not included in the box)
Spare marcury lampVLT-XL5950LP
    What’s included in the box
2   AC power cord 246C483-10
246C383-20
1Audio/Video cable 246C381-10
1RGB cable for PC 246C448-10
2RS-232C cable 246C447-10
1Terminal cover
(with Anti-Theft Alarm device) 955B288-01
2Safety pin 450D057-10
PIN No. SPEC
1R(RED)/CR2G(GREEN)/Y3B(BLUE)/CB4GND5GND6GND7GND8GND9–10 GND11 GND12 DDC Data13 HD/CS14 VD
15 DDC Clock
COMPUTER IN/OUT
(Mini D-SUB 15P)
PIN No. NAME I/O
1TXD IN2––3DTR IN4GND –5CTS / 5V IN/OUT6DCD / CLOCK OUT7RXD OUT
8RI / DATA OUT
RS-232C (8P)
1
352
68
1 5
116 10
15
434371
131.5*
103*176
434
443
176
434
434
131.5*
103*
With Terminal cover
* Factory-defaults of XL5980U * Factory-defaults of XL5980U* *
*
*
:For RS-232C/MOUSE terminal
* 
						

							EN – 29
ENGLISH
Specification of RGB signals in each computer mode of the projector
*1 : The Expand mode and the PinP mode don’t
function with this signal.
•When the EXPAND MODE of FEATURE menu is
set to real screen display, by pressing the EXPAND
button on the remote control, it will switch to the
screen displaying the picture as its original size (real
screen display).  In the real screen display, pictures
will be black-framed when picture resolution is
lower than 1024 x 768.
Important:
•Some computers may not be compatible with the
projector.
•The projectors maximum resolution is 1024 x 768
pixels.  It may not display correctly for the pictures
of higher resolutions than 1024 x 768.•The picture with a SYNC on G (Green) signal
may jitter.
•The picture with a SYNC on G (Green) signal may
be tinged with green.
•If the resolution and frequency of your computer
are not shown on the table, change the resolution
of your computer. You may find the compatible reso-
lution and frequency.
•Set the COMPUTER INPUT in SIGNAL menu to
RGB, when inputting the HDTV signal as RGB sig-
nal.
•In case of the SXGA, the right side of the image
may not appear. In this case, adjust the TRACK-
ING in the SIGNAL menu.
Signal mode Resolution Horizontal Vertical Normal mode Real mode (H x V) frequency (kHz) frequency (Hz) (H x V)  (H x V)TV60 – 15.73 59.94 1024 x 768 – *1
TV50 – 15.63 50.00 1024 x 768 – *1
1080i – 33.75 60.00 1024 x 576 –525p – 31.47 59.54 1024 x 768 –
625p – 31.25 50.00 1024 x 768 –
720p – 45.00 60.00 1024 x 576 –PC98 640 x 400 24.82 56.42 1024 x 640 640 x 400
CGA70 640 x 400 31.47 70.09 1024 x 640 640 x 400
CGA84 640 x 400 37.86 84.14 1024 x 640 640 x 400CGA85 640 x 400 37.86 85.08 1024 x 640 640 x 400
VGA60 640 x 480 31.47 59.94 1024 x 768 640 x 480
VGA72 640 x 480 37.86 72.81 1024 x 768 640 x 480VGA75 640 x 480 37.50 75.00 1024 x 768 640 x 480
VGA85 640 x 480 43.27 85.01 1024 x 768 640 x 480
VGA120 640 x 480 61.89 120.17 1024 x 768 640 x 480SVGA56 800 x 600 35.16 56.25 1024 x 768 800 x 600
SVGA60 800 x 600 37.88 60.32 1024 x 768 800 x 600
SVGA72 800 x 600 48.08 72.19 1024 x 768 800 x 600SVGA75 800 x 600 46.88 75.00 1024 x 768 800 x 600
SVGA85 800 x 600 53.67 85.06 1024 x 768 800 x 600
SVGA95 800 x 600 59.97 94.89 1024 x 768 800 x 600SVGA120 800 x 60077.11 119.931024 x 768 800 x 600
XGA43i 1024 x 768 35.52 86.96 1024 x 768 – *1
XGA60 1024 x 768 48.36 60.00 1024 x 768 1024 x 768XGA70 1024 x 768 56.48 70.07 1024 x 768 1024 x 768
XGA75 1024 x 768 60.02 75.03 1024 x 768 1024 x 768
XGA85 1024 x 768 68.68 85.00 1024 x 768 1024 x 768XGA120 1024 x 768 98.58119.781024 x 768 1024 x 768
SXGA70a 1152 x 864 63.85 70.01 1024 x 768 1024 x 768
SXGA75a 1152 x 864 67.50 75.00 1024 x 768 1024 x 768SXGA85a 1152 x 864 77.49 85.06 1024 x 768 1024 x 768
SXGA60b 1280 x 960 60.00 60.00 1024 x 768 1024 x 768
SXGA75b 1280 x 960 75.00 75.00 1024 x 768 1024 x 768SXGA85b 1280 x 960 85.94 85.00 1024 x 768 1024 x 768
SXGA43i 1280 x 1024 46.43 86.87 1024 x 768 – *1SXGA60 1280 x 1024 63.98 60.02 1024 x 768 1024 x 768
SXGA75 1280 x 1024 79.98 75.03 1024 x 768 1024 x 768
SXGA85 1280 x 1024 91.15 85.02 1024 x 768 1024 x 768MAC13 640 x 480 35.00 66.67 1024 x 768 640 x 480
MAC16 832 x 624 49.72 74.55 1024 x 768 832 x 624
MAC19 1024 x 768 60.24 75.02 1024 x 768 1024 x 768MAC21 1152 x 870 68.59 74.96 1024 x 768 1024 x 768
HP75 1024 x 768 62.94 74.93 1024 x 768 1024 x 768
HP72 1280 x 1024 78.13 72.00 1024 x 768 1024 x 768SUN66a 1152 x 900 61.85 66.00 1024 x 768 1024 x 768
SUN76a 1152 x 900 71.81 76.64 1024 x 768 1024 x 768
SUN66 1280 x 1024 71.68 66.68 1024 x 768 1024 x 768SUN76 1280 x 1024 81.1376.111024 x 768 1024 x 768
SGI72 1280 x 1024 76.92 72.30 1024 x 768 1024 x 768
SGI76 1280 x 1024 82.01 76.00 1024 x 768 1024 x 768IBM60 1280 x 1024 63.42 60.00 1024 x 768 1024 x 768
UXGA 1600 x 1200 75.00 60.00 1024 x 768 – *1 
						

							EN – 30
L
 L
I
WW
H
Height
Width
•The above numbers are approximate, and may be slightly different from the actual measurements. inch
48
60
90
120
150
180 cm
163
203
305
406
508
610  inch
80
100
150
200
250
300 inch
64
80
120
160
200
240m
5.6
7.0
10.6
14.2
17.8
21.4m
8.4
10.5
15.9
21.3
26.7
32.1  inch
220
276
418
560
701
843 inch
329
414
627
839
1051
1263 cm
122
152
229
305
381
457 cm
203
254
381
508
635
762
ScreenDistance from the screen : L
Maximum
zoom (WIDE)Minimum
zoom (TELE)Diagonal sizeWidthHeight
cm
6
8
11
15
19
23cm
56
69
104
138
172
207  inch
2.4
3.0
4.5
6.0
7.5
9.0 inch
22.0
27.4
40.9
54.4
67.9
81.4
Lens shift height
Standard : I
Movement
Distance : H
cm
8
10
15
20
26
31  inch
3.3
4.1
6.1
8.1
10.1
12.1
Lens shift
width : W
Specification of the attached lens (for XL5980LU)
With Short Throw Zoom Lens (OL-X500SZ)
F No. F2.0 - F2.3
Focal distance f=37 mm - 44 mm
Zoom/Focus Electrical drive (Zoom ratio 1.2 : 1)
Picture size 40 inch (81 cm X 61 cm) - 300 inch (610 cm X 457 cm) (aspect ratio 4:3)
With Long Throw Zoom Lens (OL-X500LZ)
F No. F2.5 - F3.2
Focal distance f=64 - 90mm
Zoom/Focus Manual drive (Zoom ratio 1.4 : 1)
Picture size 80 inch (163 cm X 122 cm) - 300 inch (610 cm X 457 cm) (4:3)
(Recommended) 80 inch (163 cm X 122 cm) - 200 inch (406 cm X 305 cm) (4:3)
•The above numbers are approximate, and may be slightly different from the actual measurements. inch
24
36
48
60
90
120
150
180 cm
81
122
163
203
305
406
508
610  inch
40
60
80
100
150
200
250
300 inch
32
48
64
80
120
160
200
240m
1.1
1.6
2.2
2.7
4.1
5.5
6.9
8.3m
1.3
2.0
2.6
3.3
5.0
6.7
8.4
-  inch
42
64
86
108
163
218
272
327 inch
51
77
104
130
196
263
329
- cm
61
91
122
152
229
305
381
457 cm
102
152
203
254
381
508
635
762
ScreenDistance from the screen : L
Maximum
zoom (WIDE)Minimum
zoom (TELE)Diagonal sizeWidthHeight
cm
3
5
6
8
11
15
19
23cm
28
42
56
69
104
138
172
207  inch
1.2
1.8
2.4
3.0
4.5
6.0
7.5
9.0 inch
11.2
16.6
22.0
27.4
40.9
54.4
67.9
81.4
Lens shift height
Standard : I
Movement
Distance : H
cm
4
6
8
10
15
20
26
31  inch
1.7
2.5
3.3
4.1
6.1
8.1
10.1
12.1
Lens shift
width : W
•The above numbers are approximate, and may be slightly different from the actual measurements. inch
48
60
90
120
150
180 cm
163
203
305
406
508
610  inch
80
100
150
200
250
300 inch
64
80
120
160
200
240m
3.8
4.8
7.3
9.7
12.2
14.7m
5.3
6.7
10.2
13.6
17.1
20.6  inch
151
190
287
384
481
578 inch
209
264
400
537
674
810 cm
122
152
229
305
381
457 cm
203
254
381
508
635
762
ScreenDistance from the screen : L
Maximum
zoom (WIDE)Minimum
zoom (TELE)Diagonal sizeWidthHeight
cm
6
8
11
15
19
23cm
56
69
104
138
172
207  inch
2.4
3.0
4.5
6.0
7.5
9.0 inch
22.0
27.4
40.9
54.4
67.9
81.4
Lens shift height
Standard : I
Movement
Distance : H
cm
8
10
15
20
26
31  inch
3.3
4.1
6.1
8.1
10.1
12.1
Lens shift
width : W
with Tele Throw Zoom Lens (OL-X500TZ)
F No. F2.5 - F3.4
Focal distance f=93 - 140mm
Zoom/Focus Manual drive (Zoom ratio 1.5 : 1)
Picture size 80 inch (163 cm X 122 cm) - 300 inch (610 cm X 457 cm) (4:3)
(Recommended) 80 inch (163 cm X 122 cm) - 200 inch (406 cm X 305 cm) (4:3)
Specifications (continued)
L
 L
I
WW
H
Height
Width
L
 L
I
WW
H
Height
Width