Mitsubishi Xd3200u Dlp Projector User Manual

EN-21
Connection (for video equipment having a DVI-D terminal)
Equipment having a 
DVI-D terminalAudio cable (option)
To DVI-D terminal
DVI cable (option)COMPUTER/COMPONENT 
VIDEO DVI-D IN (HDCP)
To audio output 
terminals
AUDIO DVI-D
•	 For	connection	to	the	DVI-D	terminal,	use	a	commercially	available	DVI	cable.	
•	 Use	AUDIO	DVI-D	terminal	for	audio	input.
•	 Some	cables	may	not	be	connected	correctly	depending	on	the	size	and	shape	of	their	connectors.
•	 When	DVI	is	selected	as	the	input	source,...

EN-22
Viewing video images (continued)
D. Projecting images
Preparation:
•	 Remove	the	lens	cap.
POWER buttonCOMPUTER/DVI-D button COMPUTER 1, 2 buttons
LENS SHIFT buttonPOWER button
ZOOM/FOCUS button LENS SHIFT button
Main power switch
ZOOM/FOCUS button
POWER indicator
STATUS indicator
ENTER button
, , ,  buttons ENTER button ,  , ,  
buttonsVIDEO/HDMI button
DVI-D(HDCP) button
S-VIDEO button VIDEO button HDMI button
1.  Put the projector into standby mode by pressing the main power switch. The...

EN-23
7. Adjust the position of the projector to keep an appropriate projection distance with which images are projected in 
their specified sizes. 
8. Adjust the position of the projector so that the projector and the screen are perpendicular to each other. (See page 
10.) 
•	 When	the	projector	cannot	be	positioned	perpendicularly	to	the	screen,	adjust	the	projection	angle.	(See	page	
11.)
9. Press the ZOOM/FOCUS button to display the ZOOM/FOCUS menu.
10. Adjust with the  or  button to get an...

EN-24
Volume from the speaker
Press	the	VOLUME	+	or	- button to change the volume from the speaker.
The volume control bar will appear on the screen.
VOLUME     15
•	 The	volume	control	bar	will	disappear	about	10	seconds	after	the	VOLUME	button	is	released.
•	 The	VOLUME	buttons	don’t	function	while	the	menu	selection	bar	or	the	menu	is	being	displayed.	
•	 When	a	high-level	audio	signal,	such	as	a	DVD	audio	signal,	is	supplied	to	the	AUDIO	IN	terminals,	the	output	
from the speaker may be distorted.
•...

EN-25
Menu operation
You can make various settings using the displayed menus.
Menu display mode and menu type
There are two menu display modes: QUICK MENU mode and DETAIL MENU mode.
Each mode has the following menus.
Menus displayed in the QUICK MENU mode
The QUICK MENU contains frequently used setting items and the INFOMATION menu shows the projector condition. 
QUICK MENU (page 27) INFORMATION menu (page 28) 
INFORMATION
LAMP TIME (LOW)
INPUT
RESOLUTION
VERTICAL
FREQUENCY
HORIZONT AL
FREQUENCY
SYNC....

EN-26
Basic procedure for setting the menus
1. Press the MENU button. 
•	 The	menu	selection	bar	is	displayed	in	the	
QUICK MENU mode. 
QUICK MENU
Selectable menus ar e displayed 
by icons. (The menu icon being 
selected is displayed on a blue 
backgr ound.) 
The name of the menu being 
selected is displayed.
2.  Press the  or  button to select a menu to use.
3. Press the ENTER button (or  button).
•	 The	selected	menu	is	displayed.
NORMAL
ASPECT
LAMP MODEST
ANDARD
QUICK MENU
CONTRAST
BRIGHTNESS0
0
ST...

EN-27
Settings of each menu item
Menus displayed in the QUICK MENU mode
QUICK MENU
NORMAL
ASPECT
LAMP MODEST
ANDARD
QUICK MENU
CONTRAST
BRIGHTNESS0
0
ST ANDARD
COLOR 0
COLOR
COLOR TEMP
.
0
SHARPNESS
AUTO
COLOR
ENHANCER
SELECT
USER MENU
OK
DET AIL MENU
**
ITEMSETTINGFUNCTION
COLOR ENHANCERAUTOSelect to optimize the settings automatically depending on the input signal. (Select this option for normal use.)
PRESENTATIONSelect to make the displayed image look bright and crisp.
STANDARDSelect to make the...

EN-28
Menus displayed in the QUICK MENU mode and the DETAIL MENU mode
INFORMATION menu
INFORMATION
LAMP TIME (LOW)
INPUT
RESOLUTION
VERTICAL
FREQUENCY
HORIZONT AL
FREQUENCY
SYNC. TYPE 5WIRE
60.02 KHz 75.04 Hz
1024 x 768
COMPUTER2 0 HRG
HV B
ITEMDESCRIPTION
LAMP TIME (LOW)This item shows a lamp operating time (hour) calculated based on that LAMP MODE is LOW. 
•	 When	the	LAMP	MODE	is	STANDARD,	this	item	shows	a	longer	lamp	operating	time	than	
the actual time. (See page 43 for the interval of lamp...

EN-29
Menus displayed in the DETAIL MENU mode
IMAGE menu
IMAGE
opt.
CONTRAST
BRIGHTNESS0
0
ST ANDARD
0 0
COLOR
TINT
COLOR TEMP
.
0
SHARPNESS
AUTO
COLOR
ENHANCER
OK
ADV ANCED MENU
IMAGE
ADVANCED MENU
opt.
ON
ON
NOISE REDUCTION
CTI
INPUT LEVEL
0
ITEMSETTINGFUNCTION
COLOR ENHANCERAUTOSelect to optimize the settings automatically depending on the input signal. (Select this option for normal use.)
PRESENTATIONSelect to make the displayed image look bright and crisp.
STANDARDSelect to make the displayed image...

EN-30
INSTALLATION menu
INSTALLA TION
opt.
LAMP MODE
OFF
AUTO POWER 
ON
ST
ANDARD
STANDBY MODESTANDARD
ONSPLASH SCREEN ON
AUTO POWER 
OFFOFF
BACK COLOR
BLUE
OFF
IMAGE REVERSE
BLACK
AV  MUTE MODE
IMAGE CAPTURE GO
LENS LOCK
OK
INSTALLA TION
LENS LOCK
opt.
OFF
OFF
OK
ZOOM/FOCUS 
LOCK
LENS SHIFT LOCK
LENS SHIFT 
RESET
ITEMSETTINGFUNCTION
LAMP MODESTANDARDSelect this option when you want to view images in a well-lit room.
LOWSelect to moderate the intensity of the lamp. The operating sound is reduced and the...