Mitsubishi Xd250u-St Data Projector Users Manual
Here you can view all the pages of manual Mitsubishi Xd250u-St Data Projector Users Manual. The Mitsubishi manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
EN-31 ENGLISH Advanced features (continued) To cancel the password function: 1. Display the FEATURE menu. 2. Press the S or T button to select PASSWORD FUNCTION. 3. Press the ENTER button. The screen for canceling the password function appears. 4. Press the ENTER button. The screen for entering the password appears. 5. Enter a 4 - 8 digit password using the S, T, W or X buttons on the remote control as shown below. (S=1, X=2, T=3, W=4) 6. Press the ENTER button. If you enter a wrong password, an...
Page 32
EN-32 Advanced features (continued) Supervising and controlling by computerYou can supervise and control the projectors operation using a personal computer via a LAN network. To supervise and control the projector, install the software ProjectorView Global +* contained in the attached CD-ROM. For the installation pro- cedure and usage of the software, see User Manual of LAN Control Utility contained in the attached CD-ROM. *) Functions Batch operation of stand-alone projector / multiple projectors...
Page 33
EN-33 ENGLISH Lamp replacement This projector is equipped with a lamp to project images. This lamp is a consumable. It may burn out or its brightness may decrease during use. In such cases, replace the lamp with a new one as soon as possi- ble. Be sure to replace the lamp with a new lamp separately sold that is exclusive to this projector. Contact your dealer for purchase of the lamp. Replace the spare lamp using the lamp attachment unit that is equipped with the spare lamp (separately sold)...
Page 34
EN-34 Lamp replacement (continued) 5. Remove the lamp attachment unit. Pull the lamp unit out of the projector slowly. If it is pulled out quickly, the lamp may break, scattering glass fragments. Do not spill liquid on the removed lamp unit or do not place it near any flammable object or where children can reach to pre- vent injuries or fire. When the projector is mounted to the ceiling: Confirm that the lamp unit (j) is securely held inside the lamp dispos- able bag of the lamp attachment unit. And...
Page 35
EN-35 ENGLISH Troubleshooting Before asking for repair of the projector, check the following. If the symptom persists, stop using the projector, be sure to unplug the power plug, and then contact your dealer. No image appears on the screen. ProblemSolution Power can not be turned on. Check whether the indicators are on or off and how they are lightning. No image appears on the screen. Cancel the AV mute by pressing the AV MUTE button. Check that the lens cap is removed. It may take about 1 minute...
Page 36
EN-36 Troubleshooting (continued) Images are not displayed correctly. ProblemSolution Projected images are shaking. Projected images are displaced. Check that the cable connected to the external device isn’t intermittent. Connect the cable’s plug with the external device’s connector firmly. Press the AUTO POSITION button. Some computers output out-of-spec signals on rare occasion. Adjust the SIGNAL menu. (See page 26.) When the input signal is a WXGA video signal, confirm the setting selected in WXGA...
Page 37
EN-37 ENGLISH Troubleshooting (continued) Others If the following problem occurs after the lamp is replaced, check the following first. Maintenance Warning:Do not use flammable solvents (benzene, thinner, etc.) and flammable aerosols when cleaning the projector body and lens. Flammable substances may ignite causing fire or breakdown while the lamp is illuminating. Caution: Be sure to turn off the lamp and unplug the power cord from the wall outlet before you perform any maintenance on the projector....
Page 38
EN-38 Indicators This projector has two indicators, each of which shows the operation condition of the projector. The following offer solutions to possible problems. If these problem persist, turn the projector off and consult your dealer. Normal condition Abnormal condition POWERSTATUSCONDITIONNOTE Stand-by Lamp stand-by (about 1 minute)The POWER button cannot be used to switch between on and off. The power is on. (Normal condition) STATUS indicator POWER indicator Steady redOff Steady greenBlinking...
Page 39
EN-39 ENGLISH Specifications The specifications and outside appearance of the projector are subject to change without prior notice. Ty p e D L P ™ D ATA p r o j e c t o r Model XD250U-ST Rated power supply 100 - 240 V AC, 50 / 60 Hz Power consumption3.3 A During standby: AC 100-120V: 3W (when STANDBY MODE is STANDARD) 0.4W (when STANDBY MODE is LOW) AC 220-240V: 3W (when STANDBY MODE is STANDARD) 0.5W (when STANDBY MODE is LOW) Display Technology0.55-inch Single chip Digital Micromirror Device...
Page 40
EN-40 Specifications (continued) Connectors Dimensional drawings (unit : mm) What’s included in the box Replacement part 15 11 6 10 15 pin No.Spec. 1R (R ED )/C R 2G (G REE N )/Y 3B (B LU E)/C B 4G ND 5G ND 6G ND 7G ND 8G ND 9 DDC5V 10 GND 11 GND 12 DDC Data 13 HD/CS 14 VD 15 DDC Clockpin No.Spec. 1 R(RED)/CR 2 G(GREEN)/Y 3B (B LU E)/C B 4- 5G ND 6G ND 7G ND 8G ND 9- 10 GND 11 - 12 - 13 HD/CS 14 VD 15 - COMPUTER IN/OUT (Mini D-SUB 15-pin) IN OUT 191 2 18 HDMI IN (HDMI 19-pin) pin No.Spec. 1T MDS D ata...