Mitsubishi Xd250u-St Data Projector Users Manual
Here you can view all the pages of manual Mitsubishi Xd250u-St Data Projector Users Manual. The Mitsubishi manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 21
EN-21 ENGLISH Menu operation (continued) 2. INSTALLATION menu By default, the LAMP MODE is set to STANDARD. The LAMP MODE is set to either STANDARD or LOW depending on the setting last selected, and you cannot switch the LAMP MODE in about one minute after the lamp is on. In AUDIO INPUT, HDMI audio is selected when the Input Source is HDMI input. The audio of AUDIO 1, AUDIO 2, AUDIO 3, and MIX cannot be selected. Menu option Setting Feature description INSTALLATION ADVANCED menu WA LL SC R EE...
Page 22
EN-22 Menu operation (continued) 3. FEATURE menu You can select CINEMA MODE only when the input signal is a TV60, TV50, 480i, or 576i video signal. Menu option Setting Feature description ASPECTNORMALAutomatically sets the aspect ratio in relative to the input signal. Use this setting for most cases. 16:9 Selects a desired screen position for anamorphically squeezed or hor- izontally compressed images stored on DVD disks. You can select from CENTER, UPPER, and LOWER by pressing the ENTER button. FULL...
Page 23
EN-23 ENGLISH Menu operation (continued) 4. SINGAL menu Horizontal strips may appear in the enlarged projected image, though these conditions are not a malfunction. When you change the value of the horizontal or vertical position drastically, noise may appear. The adjustable range of the vertical position varies depending on the type of the input signal. The image may be stationary even when the value is changed. These conditions are not a malfunction. SHUTTER does not work correctly during keystone...
Page 24
EN-24 Menu operation (continued) 6. INFORMATION menu Menu option Feature description LAMP TIME (LOW)This menu shows a lamp operating time (hour) calculated assuming that LAMP MODE is LOW. When the LAMP MODE is STANDARD, this menu shows a longer lamp operating time than the actual time. (See page 34 for the interval of lamp replacement.) When the lamp operating time is 0 to 10 hours, 0H is displayed. When the lamp operating time exceeds 10 hours, the actual hours are displayed. When the lamp...
Page 25
EN-25 ENGLISH Image adjustment Adjusting projected images To adjust the brightness (CONTRAST and BRIGHT- NESS): You can make adjustments of the brightness of the projected image using the menu. (See page 18 or 20 for the menu options.) 1. Display the QUICK MENU or the IMAGE menu. 2. Select CONTRAST or BRIGHTNESS by pressing the S or T button. 3. Adjust the selected option by pressing the W or X button. To cancel the menu: 4. Press the MENU button. CONTRASTSelect to adjust the contrast of the image....
Page 26
EN-26 Image adjustment (continued) BrilliantColorTM Use this setting to make colors with medium brightness, such as yel- low and the skin tone appear natural. Press the W button to decrease the value to lessen the effect. Press the X button to increase the value to heighten the effect. (BrilliantColor TM has no effect at value 0.) 6. Select a value by pressing the W or X button. For more enhanced color reproduction, set BrilliantColor TM to 0. The white area of the color wheel is disabled, and you...
Page 27
EN-27 ENGLISH Network settings You can set the network of the projector using the menu. Setting Projector Name1. Display the NETWORK menu. (See page 27 for menu setting.) 2. Press the S or T button to select PROJECTOR NAME. 3. Press the W or X button to select SET . 4. Press the ENTER button. PROJECTOR NAME screen appears. 5. Press the direction buttons to move the key cursor, select the characters or marks to enter, and press the ENTER button. Projector Name can be set using up to 15 characters...
Page 28
EN-28 Network settings (continued) Setting or Clearing DHCP1. Display the IP CONFIG menu. 2. Press the S or T button to select DHCP. 3. Press the ENTER button. Confirmation dialog appears. 4. Press the W or X button to select ON or OFF . 5. Select the item to set, and press the ENTER button. To cancel the setting, press the MENU button. It may take some time to reflect the settings. When setting DHCP to ON, IP ADDRESS, SUBNET MASK, and DEFAULT GATEWAY cannot be set. If you set those set- tings,...
Page 29
EN-29 ENGLISH Network settings (continued) How to Use Network Function When connecting a computer and projector with LAN, config- ure the both IP Addresses in the same network group. If connecting in different network group, be sure to use a router. As for the settings of a router, ask the network adminis- trator. Configure the IP CONFIG correctly. If the settings are not cor- rect, the communication may be unavailable. For the detail, consult the network administrator. Depending on the settings of...
Page 30
EN-30 Advanced features Displaying a user-defined image during startup or mut- ing You can display your desired image as the startup screen (or splash screen). Using the menu, you can also use it as the background that is displayed while the video is muted or no signal is input. Important: You cant select IMAGE CAPTURE when PASSWORD FUNC- TION in the FEATURE menu is set to SPLASH ID SCREEN to activate the password lock. You cant select IMAGE CAPTURE when the component video signal is input....