Mitsubishi Wd720u G Projector User Manual

EN-21
Menu operation
You can make various settings using the displayed menus.
Installation
Closed CaptionStandby Mode
Of
f, On
Option
WXGA
Auto KeystoneLanguageTest Pattern
Passwor dChange Passwor dPassword
Network Config
Video Image
Signal
Information
H.Position
Hold
Set Up
0-999V.Position 0-999Fine sync 0-31Tracking
User 0-2800Clamp Width
1-63
Clamp Position
1-255LPFOn, Off
Overscan 90-100%
Shutter(L) 0-20Shutter(U) 0-20
Shutter(RS) 0-20
On, Off0-2550-2550-255
0-2550-255
Shutter(LS) 0-20
*4
*1
Auto,...

EN-22
How to set the menus
1. Press the MENU button. 
•	 The	Main	Menu	appears	on	the	screen.
Confirm Exit
SelectMENU
Main Menu
opt.
R G BR G B
Pictur e
Video Image
Signal
Audio
Installation
Option
Network Cong
Information
The item being selected is displayed in r ed letters 
on a blue backgr ound.
2. Press the   or  button to select a menu to use. 
Confirm Exit
SelectMENU
Main Menu
opt.
R G BR G B
Pictur e
Video Image
Signal
Audio
Installation
Option
Network Cong
Information
3.  Press the ENTER button...

EN-23
Menu items
Set the following items provided in the respective menus.
Picture menu
Picture
AdjustMENUExit
Select
Image
Brightness
Contrast
Color T
emp.
Color Management
Aspect Ratio
Input Level
3D
3D Sync Invert Auto
Mid
Auto Of f
Of f
Red
Normal
00
ITEMSETTINGFUNCTION
ImageAutoAutomatically sets an optimal color balance based on the input signal. Use this setting for most cases.
TheaterMakes projected images soft and smooth. Best suited for movies.
PresentationMakes projected images bright and...

EN-24
Video Image menu
Video Image
AdjustMENUExit
Select
Color
Sharpness
Tint
0
0
0
ITEMSETTINGFUNCTION
Color±10Adjusts the color tone of projected images. (See page 31.) You cannot select this setting when the Computer1, Computer2, or HDMI is selected as the input source.
Sharpness
±5Adjusts the sharpness of projected images. (See page 31.)
Tint±10Adjusts the color tint of projected images. (See page 31.) You can select this setting only when NTSC is selected as the input signal.
•	 You	cannot	adjust...

EN-25
Signal menu
Signal
AdjustMENUExit
Select
V.
 Position
Fine sync
Computer Input
Overscan
Hold
User
On Auto
90%
00T racking 0
H. Position 0
User
AdjustMENUExit
Select
Clamp Width
Shutter(U)
Shutter(L)
Shutter(LS)
Shutter(RS)
Of
f
1LPF
00
00
Clamp Position1
OK
ITEMSETTINGFUNCTION
H. Position0-999Select this setting to adjust the horizontal position of projected images.V. Position0-999Select this setting to adjust the vertical position of projected images.Fine sync0-31Select this setting to eliminate...

EN-26
Audio menu
Audio
AdjustMENUExit
Select
V
olume
Audio Input
Auto
16
ITEMSETTINGFUNCTION
Audio InputAutoSelects Audio 1 when the input source is Computer1, selects Audio 2 when the input source is Computer2, selects Audio 3 when the input source is Video/S-Video, and selects HDMI when the input source is HDMI.
Audio 1 / Audio 2 / 
Audio 3Selects audio input.
Mix 
Selects mix signal of Audio 1 and Audio 2. You can change the balance of 
Audio 1/Audio 2 using Mix .
Volume 0-21Adjusts the volume of the...

EN-27
Installation menu
Off
Installation
AdjustMENUExit
Select
Ef
cient Mode
Image Reverse
Auto Power On
Auto Keystone
T est Patter n
Language
Reset All English
Of
fOff
Menu Position Upper LeftOK
Cr
oss Hatch
Efcient Mode
AdjustMENUExit
Select
Lamp Mode
Standar
d
Auto Power Of f 5MinStandby Mode Low
OK
ITEMSETTINGFUNCTION
Efficient ModeOK Displays the Efficient Mode menu for the following settings.
 
Lamp ModeStandardSelect this option when you want to view images in a well-lit room.
LowSelect to...

EN-28
Option menu
Option
AdjustMENUExit
Select
Passwor
d
WXGA
Set Up
Image Captur e
Splash Scr een
Back Color
AV  Mute Mode Of
f
Original Blue
BlackOf f
Auto
Video Signal AutoCinema ModeAuto
Closed CaptionOK
OK
ITEMSETTINGFUNCTION
PasswordOK Use this setting to activate or deactivate the password lock.
Cinema ModeAuto / OffSelect Auto to automatically activate the film mode when the input video signal is a video signal from a film.
Video Signal8 optionsSelect Auto to automatically set the appropriate...

EN-29
Network Config menu
Network Cong
AdjustMENUExit
Select
Pr
ojector Name
Network Certication
Network Passwor d
IP Cong
Wir eless Setting
AMX Device Discovery
Network Initialization
Network Restart
OK
SET
OK
OKOK
OK
Wir eless Setting
AdjustMENUExit
Select
SSID
Channel
Encryption
Wir
eless Setup
OK
Auto
Of f
MENU
IP Cong
Adjust Exit
Select
DHCP
IP Addr
ess
Subnet Mask
Default Gateway
MAC Addr ess
DHCP Function
Start IP Addr ess
End IP Addr ess
IP Cong Setup
On
OK
xx-xx-xx-xx-xx-xx Of f
169-
-
-255
169...

EN-30
Information menu
Information
MENUExit
Lamp Time
H. Fr
equency
V.  Fr equency
Sync. T ype 2000H
60.00 kHz 60.00 Hz 3Wir e
Resolution
1024x768
Input
Computer1
ITEMDESCRIPTION
Lamp TimeThis menu shows a lamp operating time (hour) calculated assuming that \
Lamp Mode is Low. 
•	 When	the	Lamp	Mode	is	Standard,	this	menu	shows	a	longer	lamp	operating	time	than	the	
actual time. (See page 52 for the interval of lamp replacement.)
InputIndicates the name of the terminal to which the currently projected...