Mitsubishi Wd720u G Projector User Manual

EN-41
Projection
Selecting a LAN Display input
1. Press the LAN DISP. button on the remote control 
or the COMPUTER button on the projector.
•	 Each	time	you	press	the COMPUTER 
button, the input source is switched between 
Computer1, Computer2, HDMI, LAN Display, 
USB Display and PC Less Presentation.
•	 When	the	LAN	Display	input	is	selected,	the	
splash screen for LAN Display appears on the 
screen.
 
Starting the LAN Display System
2. Click the LAN Display System icon “” to execute 
the program. 
•...

EN-42
 Important:
•	Virtual display function is only supported by 
Windows XP.
•	 To	project	a	virtual	extended	screen,	the	
attached Virtual display driver must be 
installed.
• Hide UI
 Hides or displays the main user interface.
• About
 Displays the version information of the  LAN 
Display System. 
• Exit
 Exits the LAN Display System.
Ending the LAN Display projection
5. Click the Exit button on the main user interface or 
the menu window to exit the LAN Display System.
6. In case of the wireless LAN...

EN-43
PC Less Presentation
You can project JPEG images and the PtG contents 
stored in the USB device such as a USB memory 
without using a computer.
Also, you can perform effective presentation of 
them using the AutoRun function and the slideshow 
function.
To create PtG contents, you need to install the 
software “PtG Converter-Lite” contained in the 
attached CD-ROM.
Important:
•	 Supported	USB	Flash	drive	format	is	FAT32.
•	 Only	one	logical	partition	in	USB	Flash	drive	is	
supported.
•	 Supported...

EN-44
Conversion of a PPT file to PtG file using 
the PtG Converter-Lite
1. Click the PtG Converter-Lite icon “” to execute 
the program. 
PPT conversion button
Menu bar
•  Menu bar
  Right-click to open the menu. 
• Max Circle Animation: 
  Selects the max time of animation.
• About:
  Displays the software version information.
• Exit:
  Exits the PtG Converter-Lite.
• PPT conversion button:
  Starts the conversion from the PPT file to the 
PtG file. 
2. Click the PPT conversion button.
• The file...

EN-45
Setting up
2. Press the  or  button on the remote control to 
select Setup and press the ENTER button.
•	The Setup screen appears. 
 
3. Press the  or  button to select a setting item 
and press the  or  button to change the setting.
•	AutoRun:
 Enables or disables the AutoRun and slideshow 
function.
AutoRunSlideshow 
OFFDisables.Disables.
PtGEnables for PtG 
files.
Enables for all 
files.
PhotoEnables for JPEG 
files.
Enables for all 
files.
•	Interval:
 Sets the interval for PtG pause mark...

EN-46
Displaying with AutoRun function
5. Create an “AUTORUN” folder in the root directory 
of the USB device using a computer or other.
6. Save a PtG file or JPEG files in the AUTORUN 
folder.
 Important:
•	The AutoRun function supports single PtG file 
only. The first PtG file is played if multiple PtG 
files exists in AUTORUN folder.
7. Connect the USB device to the USB-A terminal.
•	 The	files	specified	by	the	AutoRun	setting	(PtG	
or Photo) are played back automatically.
8. Press the ENTER button to...

EN-47
Freeze
To stop the motion in the image temporarily (or to 
display a still image):
Press the FREEZE button on the remote control.
•	 The	image	freezes	temporarily.
To resume the motion in the image:
Press the FREEZE button on the remote control again.
Important:
•	 Do	not	keep	displaying	a	still	picture	for	an	
extended period of time, as the afterimages may 
linger on the screen.
Magnify
By pressing the MAGNIFY button on the remote 
control, you can magnify the image to view the details.
•	 The...

EN-48
Advanced features (continued)
Password lock
This projector provides the password lock function 
that is intended to prevent wrong operations by 
children and set controlled access for specified users. 
If the password lock is enabled, when the projector is 
turned on, the startup screen (or splash screen) will 
appear and stay on the screen until the password is 
entered. When the password is entered, the startup 
screen will switch to the regular operation screen.
To set a password:
(See page 22...

EN-49
About PJLink™
•	 To	use	PJLink™	function,	the	PJLink™	
application software is required. 
•	 To	use	this	function,	set	the	network	certification	
properly according to the setting of the network 
application to be used. (See page 34.)
•	 For	the	specifications	of	PJLink™,	access	to	
the Web site of Japan Business Machine and 
Information System Industries Association 
(JBMIA). (http://pjlink.jbmia.or.jp/english)
•	 This	projector	is	fully	compliant	to	the	
specifications of JBMIA PJLink™ Class 1....

EN-50
Connection
For details of the connection, see “LAN control UTILITY operation manual” in the CD-ROM.
When Standby Mode of the Efficient Mode menu in the Installation menu of the projector is set to Low, the LAN 
network is disabled. To enable the LAN network, set Standby Mode to LAN. (See page 27.)
Configure the initial network settings first. 
You	can	configure	the	initial	settings	using	the	projector	menu	(see	pages	34	to	38)	or	ProjectorView	Global+.	For	
details	of	ProjectorView	Global+,	see...