Mitsubishi Ul7400u Projector User Manual

EN-31
How to set the menus
1.  Press the MENU button. 
t
 5IF
NFOV
TFMFDUJPO
CBS
JT
EJTQMBZFE

IMAGE
opt.
Selectable menus are displayed by icons. (The menu 
icon being selected is displayed on a blue background.) 
The name of the menu being 
selected is displayed.
2. Press the  or  button to select a menu to use.
3.  Press the ENTER button (or  button).
t
 5IF
TFMFDUFE
NFOV
JT
EJTQMBZFE
COMPUTER
0 COLOR
0
TINT
0 SHARPNESS
ADVANCED MENU NCM
SUPER RESOLUTION
IMAGE
BRIGHTNESS 0
COLOR ENHANCER
AUTO...

EN-32
IMAGE menu
COMPUTER
0 COLOR
0
TINT
0 SHARPNESS
ADVANCED MENU NCM
SUPER RESOLUTION
IMAGE
BRIGHTNESS 0
COLOR ENHANCER
AUTO
CONTRAST
STANDARDCOLOR TEMP.
opt.
IMAGE
ADVANCED MENU
opt.
AUTO IRIS
NOISE REDUCTION
CTI
0INPUT LEVEL
OFF
CLOSED CAPTION
OFF
OFF
OFF 0
ENTER
ON
ITEM SETTING FUNCTION
COLOR ENHANCER AUTO Select to optimize the settings automatically depending on the input signal. 
(Select this option for normal use.)
PRESENTATION Select to make the displayed image look bright and crisp.
STANDARD...

EN-33
INSTALLATION menu
INSTALLATION
LENS LOCK
LENS SHIFT LOCK ZOOM/FOCUS LOCK
LENS SHIFT RESETOFF
OFF
opt.
OK
INSTALLATION
LAMP MODE
STANDARD
LOW
OFF
STANDBY MODE
IMAGE REVERSE
LENS LOCK
opt.
ENTER
AUTO POWER ON
AUTO POWER OFFOFF
ON
BLUE
5min
IMAGE CAPTURE
SPLASH SCREEN
BACK COLOR
ONSETUP
AUTO DVI LONG CABLE
ITEM SETTING FUNCTION
LAMP MODE STANDARD Select this option when you want to view images in a well-lit room.
LOW Select to moderate the intensity of the lamp. The operating sound is reduced 
and the...

EN-34
FEATURE menu
FEATURE
ADVANCED MENU
SETUP
SCART INPUTAUTO
AUTO
OFF
STANDARD
OFF
VIDEO SIGNAL
LAMP WARNING
HIDE OSD
opt.
LANGUAGE
ADVANCED MENU
FEATURE
SCREEN
PROJECTOR ID16:10
AUTO
English
ALL
DISPLAY INPUT
ENTER
CINEMA MODE
PASSWORD FUNCTION
MENU POSITION
opt.
ASPECT
NORMAL
AË
RESET ALLOK
1.
FILTER MENUENTER
STANDARD HIGH ALTITUDE MODE
ITEM SETTING FUNCTION
ASPECT NORMAL Input video signal is displayed at the max height (1200 pixels) 
or max width (1920 pixels) of the panel while its aspect ratio...

EN-35
ITEM SETTING FUNCTION
ADVANCED MENU ENTER 
The ADVANCED MENU is displayed for the following settings.
  VIDEO SIGNAL AUTO / NTSC / PAL / SECAM 
/ 4.43NTSC / PAL-M / PAL-N / 
PAL-60When AUTO is selected, the appropriate video format is 
automatically selected depending on the input signal. If the image 
isn’t displayed correctly, select the desired video format manually.
  SETUP AUTO Select to change the SETUP mode automatically.
OFF Select to make black lighter. 


Select to make black...

EN-36
SIGNAL menu
R G BR G B
VHA
U
0
100% COMPUTER INPUT
AUTO
OVER SCAN 
HOLD
USER FINE SYNC.
SIGNAL
VERT. POSITION 0 MEMORY CALL
RESOLUTION
(MEMORIZE    )AUTO
HORIZ. POSITION
0 TRACKING
opt.opt.
SIGNAL
RESOLUTION (MEMORIZE)
VERTICAL 
FREQUENCY
HORIZONTAL 
FREQUENCY
HORIZ. PIXELS
VERT. LINES 
EXECUTE
CANCEL 60.00 Hz
1
48.36 KHz
1024
768
ENTER
0 1024 x 768
OFF
0
SHUTTER(L)0
SHUTTER(LS)
0SHUTTER(RS)
LPF
SIGNAL
USER
VERT. SYNC. AUTO
CLAMP WIDTH
0SHUTTER(U)
opt.
1
OK
OK
?
CLAMP POSITION
ON
ITEM SETTING...

EN-37
NETWORK menu
NETWORK
IP CONFIG
opt.
DHCP
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
0. 0. 0. 0
MAC ADDRESS
SAVE SETTINGS
ON
0. 0. 0. 0
OK
CONTROL SYSTEM
NETWORK 
PASSWORD
NETWORK
NETWORK 
CERTIFICATION PROJECTOR NAME
IP CONFIG
NETWORK RESET
opt.
STANDARD
ENTER
ENTER
OK
NETWORK RESTART
OK
ON
0. 0. 0. 0
ITEM SETTING FUNCTION
PROJECTOR NAME *****... 
Set the name to identify the projector. Enter up to 15 characters 
(alphabets or numeric characters). (See page 44.)
NETWORK CERTIFICATION
ON 
 / OFF  Select...

EN-38
INFORMATION menu
60.00 Hz RESOLUTION
1024 x 768
VERTICAL
FREQUENCY
48.36 kHz
5WIRE HORIZONTAL
FREQUENCY
SYNC. TYPE SERIAL NUMBER
INFORMATION
********...
COMPUTER1 INPUT
opt.
RG
HVB
LAMP TIME (LOW)****H
ITEM DESCRIPTION
LAMP TIME (LOW)
This item shows the lamp operation time calculated based on that the LAMP MODE of LAMP is 
LOW.  
t
 8IFO
UIF
-.1
.0%&
JT
45/%3%

UIJT
JUFN
TIPXT
B
MPOHFS
MBNQ
PQFSBUJOH
UJNF
UIBO

the actual time.
t
 8IFO
UIF
MBNQ
PQFSBUJOH
UJNF
JT

UP

IPVST...

EN-39
Adjusting projected images
To adjust the brightness (CONTRAST and BRIGHTNESS):
You can make adjustments for the brightness of the projected image using the menu. 
(See page 31 for menu setting.) 
1.  Display the IMAGE menu. 
2.  Select CONTRAST or BRIGHTNESS by pressing the  or  button. 
3.  Adjust the selected item by pressing the  or  button. 
To cancel the menu:
4.  Press the MENU button. 
CONTRAST 
Select to adjust the contrast of the image. Every time the  button is pressed, the image...

EN-40
To cancel the menu:
7.  Press the MENU button. 
To enable the stored color temperature: 
1.  Set COLOR TEMP. to USER 
 in the IMAGE menu. 
About color temperature
Color temperature is a way to show the differences in white. White of which temperature is low appears reddish. 
When the color temperature rises, white appears bluish. For example, you can change the color temperature using 
the following procedures. 
To raise the color temperature: Increase the CONTRAST B (blue) and decrease the...