Mitsubishi Ul7400u Projector User Manual

EN-21
Viewing computer images (continued)
D. Projecting images
Preparation:
t
 3FNPWF
UIF
MFOT
DBQ
COMPUTER 1, 2 buttons
POWER indicator
STATUS indicatorDVI-D(HDCP) 
button
ENTER button
, , ,  buttons
POWER button
(ON/STANDBY)
, , ,  buttons
COMPUTER/DVI-D button
ENTER button
ZOOM/FOCUS button
LENS SHIFT buttonPOWER button 
(ON/STANDBY)
LENS SHIFT button
ZOOM/FOCUS button
1.  Confirm the POWER indicator lights up red. 
t
...

EN-22
Viewing computer images (continued)
9.  Press the ZOOM/FOCUS button to display the ZOOM/FOCUS menu.
10. Adjust with the  or  button to get an approximate size. 
t
 8IFO
UIF
&/5&3
CVUUPO
JT
QSFTTFE
XIJMF
UIF
;00.0$64
NFOV
JT
EJTQMBZFE

UIF
BEKVTUNFOU
NPEF
JT

switched between FAST and STEP. When FAST is selected, the speed of zoom controlled by the  or  
button becomes fast, and it becomes slow when STEP is selected.
11. Press the LENS SHIFT button. The LENS SHIFT menu appears at the center of...

EN-23
Blanking the screen temporarily (BLANK)
The video and audio signals are temporarily muted when the BLANK button is pressed. You will hear an operating 
sound inside the projector. To cancel muting, press the BLANK button again.
t
 :PV
DBO
BMUFS
UIF
TQMBTI
TDSFFO
PQUJPOBMMZ
4FF
QBHF


t
 5IF
BVEJP
GSPN
UIF
6%*0
065
UFSNJOBM
JT
BMTP
NVUFE
CZ
QSFTTJOH
UIF
#-/,
CVUUPO
AUTO POSITION button 
When the image supplied from the computer is displaced, carry out the following procedure. 
1.  Project a...

EN-24
Viewing computer images (continued)
Setting the aspect ratioYou can change the aspect ratio of the input video signal (or the ratio of width to height of the image). Change the 
setting according to the type of the screen to be used or your preference. 
How to change the settings:
With the remote control:
1.  Press the ASPECT button. 
t
 &WFSZ
UJNF
UIF
41&$5
CVUUPO
JT
QSFTTFE

UIF
BTQFDU
NPEF
DIBOHFT
GSPN
/03.-
UP


UP
3&-

UP
6--


and back to NORMAL. 
t
...

EN-25
Viewing video images
Connecting to a video player, etc.
1.  Connect one end of a commercially available BNC cable to 
the VIDEO IN terminal of the projector.
2.  Connect the other end of the BNC cable to the video 
output terminal of the video equipment.
3.  Connect one end of a commercially available audio cable 
to the audio input terminals (L/MONO, R) of the projector.
4.  Connect the other end of the audio cable to the audio 
output terminals (L, R) of the video equipment.
When the video...

EN-26
Viewing video images (continued)
Projector + DVD player or HDTV decoder
Some DVD players have an output connector for 3-line fitting (Y, CB, CR). When connecting such DVD player with this 
projector, use the COMPUTER/COMPONENT/VIDEO
 IN 2 terminals. 
CB(PB) Y CR(PR) 
B  G R 
AUDIO IN 2
DVD player or HDTV decoderCOMPUTER/COMPONENT/
VIDEO IN 2
BNC-RCA connector (option)BNC cable (option)
Audio cable (option)
To audio output 
terminals
t
 5IF
UFSNJOBMT
OBNFT
:

1B, and PR are given as examples of when...

EN-27
Connection (for video equipment having a DVI-D terminal)
Equipment having a 
DVI-D terminalTo DVI-D terminalDVI cable (option)
COMPUTER/COMPONENT/
VIDEO DVI-D IN (HDCP)
Audio cable (option)
To audio output 
terminalsAUDIO DVI-D
t
 PS
DPOOFDUJPO
UP
UIF
%7*%
UFSNJOBM

VTF
B
DPNNFSDJBMMZ
BWBJMBCMF
%7*
DBCMF

t
 6TF
6%*0
%7*%
UFSNJOBM
GPS
BVEJP
JOQVU
t
 4PNF
DBCMFT
NBZ
OPU
CF
DPOOFDUFE
DPSSFDUMZ
EFQFOEJOH
PO
UIF
TJ[F
BOE
TIBQF
PG
UIFJS
DPOOFDUPST
t
 8IFO
%7*
JT
TFMFDUFE
BT
UIF
JOQVU
TPVSDF...

EN-28
Viewing video images (continued)
D. Projecting images
Preparation:
t
 3FNPWF
UIF
MFOT
DBQ
COMPUTER 1, 2 buttons
POWER indicator
STATUS indicatorDVI-D(HDCP) button S-VIDEO button VIDEO button
VIDEO/HDMI buttonHDMI button
ENTER button
, , ,  
buttons
POWER button
(ON/STANDBY)
, , ,  buttons
COMPUTER/DVI-D button
ENTER button
ZOOM/FOCUS button
LENS SHIFT buttonPOWER button 
(ON/STANDBY)
LENS SHIFT button
ZOOM/FOCUS button
1.  Confirm the POWER indicator lights up red. 
t
...

EN-29
11. Press the LENS SHIFT button. The LENS SHIFT menu appears at the center of the screen.
12. Press the  or  button to adjust the vertical position and 
 or  button to adjust the horizontal position of the 
displayed image.
t
 8IFO
UIF
JNBHF
JT
OPU
EJTQMBZFE
XJUIJO
UIF
TDSFFO

BEKVTU
UIF
QSPKFDUJPO
BOHMF
*O
BEEJUJPO

QFSGPSN
UIF

keystone adjustment, if necessary. (See page 14.)
Repeat steps 4, 5 and 9 to 12, if necessary. 
Important:
t
 PDVT...

EN-30
Menu operation
You can make various settings using the displayed menus.
Following 6 menus are displayed.
IMAGE menu (page 32) INSTALLATION menu (page 33) FEATURE menu (page 34) 
INFORMATION menu (page 38) 
COMPUTER
0 COLOR
0
TINT
0 SHARPNESS
ADVANCED MENU NCM
SUPER RESOLUTION
IMAGE
BRIGHTNESS 0
COLOR ENHANCER
AUTO
CONTRAST
STANDARDCOLOR TEMP.
0
ENTER
LANGUAGE
ADVANCED MENU
FEATURE
SCREEN
PROJECTOR ID16:10
AUTO
English
ALL
DISPLAY INPUT
ENTER
CINEMA MODE
PASSWORD FUNCTION
MENU POSITION
opt.
ASPECT...