Mitsubishi Ul7400u Projector User Manual
Here you can view all the pages of manual Mitsubishi Ul7400u Projector User Manual. The Mitsubishi manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 1
U UL7400 This User Manual is important to you. Please read it before using your projector. LCD PROJECTOR MODEL UL7400U User Manual
Page 2
EN-2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an...
Page 3
EN-3 Contents Important safeguards ........................................................................................................................ 4 Preparing your projector .................................................................................................................... 6 Using the remote control ................................................................................................................... 9 Setting up your projector...
Page 4
EN-4 Important safeguards Please read all these instructions regarding your projector and retain them for future reference. Follow all warnings and instructions marked on the projector. 1. Read instructions All the safety and operating instructions should be read before the appliance is operated. 2. Retain instructions The safety and operating instructions should be retained for future reference. 3. Warnings All warnings on the appliance and in the operating instructions should be adhered to....
Page 5
EN-5 Important safeguards (continued) WARNING: Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your projector. It might cause fire or electric shock. In this case, unplug immediately and contact your dealer. Never remove the cabinet. This projector contains high voltage circuitry. An inadvertent contact may result in an electric shock. Except as specifically explained in the User Manual do not attempt to service this...
Page 6
EN-6 Preparing your projector 1Checking accessories The following accessories are provided with this projector. Check to be sure that all of the accessories are packed in the package. Cables Remote control parts Remote control (290P188-10)RS-232C cable (J2552-0114-00)R6 (size-AA) battery (two) Computer cable (J2552-0072-05) Others 9Lens cap (attached to the projector) 9Lens ring 9Terminal cover 9Lamp replacement tray 9CD-ROM 9Safety Manual/Quick Start up Mini D-SUB 15-pin Mini D-SUB...
Page 7
EN-7 Overview 671112910 3 2145138 6 7 8 9 10 1 3 4 52 1 Speaker 2 Lens release button 3 Indicators 4 Air inlet grille/Filter cover 5 Air inlet grille 6 Lens 7 Remote control sensor (front) 8 Remote control sensor (rear) 9 Control area 10 Terminal panel 11 Air outlet grille 12 Air inlet grille 13 Lamp cover Control area 1 POWER button (ON/STANDBY) The status is changed between ON and STANDBY. 2 ENTER/GEOMETRY button 3 COMPUTER/DVI-D/ button 4 ZOOM/FOCUS button 5 MENU button 6 AUTO POSITION/...
Page 8
EN-8 2 1123 Preparing your projector (continued) Bottom side Indicators 1 Lock bar (SECURITY ANCHOR) t UUBDIBDIBJO FUDUPUIJTMPDLCBSUPBODIPS the projector. 2 Adjustment feet 1 FILTER indicator 2 STATUS indicator 3 POWER indicator 2 2922 23 25 15 13 16 17 18 19 12 21 20 314 27 28 26 4 5 1 6 7 8 24 9 10 11 Remote control 1 Indicator 2 POWER button (ON/STANDBY) The status is changed between ON and STANDBY. 3 COMPUTER 1, 2 buttons 4 MENU button 5 BLANK button 6 ZOOM/FOCUS button 7 ID button 8...
Page 9
EN-9 Using the remote control Using the wired remote control Attached remote control for this projector can be used as a wired remote control with remote control cable. Wired remote control is useful for operating in a distance or outside of the operating area. REMOTE IN REMOTE OUT REMOTE INt PSDPOOFDUJPO VTFUIFQJOQJODBCMFPG
Page 10
EN-10 Using the remote control (continued) Setting the ID number of the remote control You can control multiple projectors collectively or individually using one remote control by setting the ID number (CONTROLLER ID) of the remote control. To control multiple projectors using the remote control, you need to select the projector’s ID number (PROJECTOR ID) with the remote control in advance. ID numbers should be two-digit numbers “01” to “63” or “ALL.” Other numbers cannot be used. ID button...