Mitsubishi Tx20u Projector User Manual

Network settings (continued)
EN-41
 Password can be set using up to 32 characters
including alphabets (capital/small) or numeric
characters.
 key:.............. Shifting the position of enter 
cursor to the left for each 
character.
 key:.............. Shifting the position of enter 
cursor to the right for each 
character.
DEL key: .......... Deleting the character in the 
position of enter cursor for each 
character.
caps/CAPS key:Switching an alphabet character 
to CAPITAL or small.
NEXT/PREV...

EN-42
Network settings (continued)
IP Address Settings
1. Display the IP CONFIG menu.
2. Press the S or T button to select IP ADDRESS.
3. Press the ENTER button.
 IP ADDRESS screen appears. 
4. Press the direction buttons to move the key cursor, 
select the numbers to enter, and press the ENTER 
button.
 Set the numeric value within the range from 0 to
255. However, set the numeric value for the final
octet within the range from 1 to 254.
 key: ............. Shifting the position of enter 
cursor to the...

Network settings (continued)
EN-43
Start IP Address setting
1. Display the IP CONFIG menu.
2. Press the S or T button to select START IP 
ADDRESS.
3. Press the ENTER button.
 START IP ADDRESS screen appears.
4. Enter the Start IP address.
 Refer to IP Address Settings for the detail of
entering.
5. When selecting OK, the setting is completed as the 
START IP ADDRESS stored temporarily. However, 
when selecting CANCEL, the setting is completed 
without storing.
 Set the numeric value within the range from...

EN-44
Network settings (continued)
3. Press the ENTER button.
 The SSID screen appears.
4. Press the S, T, W, and X buttons to move the key 
cursor to select the characters or marks to enter, 
and press the ENTER button.
 SSID can be set using up to 32 characters
including alphabets (capital/small) or numeric
characters.
 key: ............. Shifting the position of enter 
cursor to the left for each 
character.
 key: ............. Shifting the position of enter 
cursor to the right for each 
character....

Network settings (continued)
EN-45
 WPA-PSK(HEX): 64 digits
 WPA2-PSK(HEX): 64 digits
 If the entered content is outside character number
range, the KEY screen appears again after an
error dialog is displayed.
Saving Wireless Settings
1. Display the WIRELESS SETTING menu.
2. Press the S or T button to select SAVE SETTINGS.
3. Press the ENTER button.
 Confirmation dialog appears.
4. If the ENTER button is pressed again, the 
WIRELESS SETTING will be refl ected.
 It may take some time to refl ect the...

EN-46
USB Display
You can project the computer images inputted via a 
USB connection.
Supported OS’s are as follows:

 Windows Vista

 Mac OS X 10.5 or later
Important:
 You need to install the driver only when using MAC
OS X.
 Mac computers based on the PowerPC processors
are not supported.
 Only 1-to-1 screen projection is supported.
 Moving images cannot be displayed.
Connection
Connect the projector and the computer using a 
commercially available USB cable.
You can set the network of the projector...

Advanced display utilities (continued)
EN-47
Operation
Starting USB Display projection
1. Press the SOURCE button and select USB DISPLAY.
 When the USB Display input is selected, the 
splash screen for USB Display appears on the 
screen.
2. When the computer is connected to the projector,
the computer image is automatically displayed on
the screen.
Ending USB Display projection
„When using Windows XP, Windows Vista, or 
Windows 7
3. Unplug the USB cable from the projector.
 It is not necessary to “Safely...

EN-48
Advanced display utilities (continued)
„When using Mac OS X
1. Copy “LAN Display System_v300.dmg” contained in
the TOOLS folder of CD-ROM to the hard disk of
your computer.
2. Double-click “LAN Display System_v300.dmg” on
the hard disk.
 The volume is mounted.
3. Drag and drop “LAN Display System” and
“SidePadLite” into the [Applications] folder.
When deleting LAN Display System (Uninstallation)
Important:
 When uninstalling LAN Display System, it should be
ended in advance. If the application...

Advanced display utilities (continued)
EN-49
Starting the LAN Display System
2. Click the LAN Display System icon “ “ to execute
the program.
 The program starts to search for projectors 
automatically.
 During searching for projectors, Searching icon is 
displayed.
 When a projector is found, the computer logs in to 
the projector automatically and the computer 
image is projected. The main user interface 
appears on the computer screen.
 When multiple projectors are found, the following 
window appears...

EN-50
Advanced display utilities (continued)
Important:
 To use this function with Windows XP, the 
attached Virtual Audio driver must be installed.
 To use this function with Mac OS X, attached 
Soundflower must be installed.
•About
Displays the version information of the LAN 
Display System.
•Exit
Exits the LAN Display System.
Important:
 The items marked with “*” are not available for 
Mac OS X.
 When “Advanced Screen Capture” is enabled, the 
computer mouse cursor may blink.
Ending the LAN Display...